Jurnal
PENGARUH PERBEDAAN METODE MELT PROCESSING DAN SISTEM LARUT TERHADAP HASIL GRAFT KOPOLIMERISASI CYCLIC NATURAL RUBBER (CNR) DENGAN GLYCIDYL METHACRYLATE (GMA)
Lantanida Journal · Vol. 12 No. 2 (2024) · hlm. 124–138
ISSN 2548-9062, 2356-3133
Terbit 2024-12-06
Penerbit UIN AR-RANIRY
Bahasa eng
Abstrak
Although natural rubber has many good qualities, its commercial uses are limited by its low chemical reactivity and low heat stability. A derivative with better stability, Cyclic Natural Rubber (CNR), has to be chemically modified to increase its usefulness and broaden its range of applications. Investigating the effects of two different methods, the melt processing and solution system on the FTIR spectra of Cyclic Natural Rubber (CNR) graft copolymerization with Glycidyl Methacrylate (GMA) was the aim of this work. Additionally, an evaluation of the effect of Dicumyl Peroxide (DCP) and Benzoyl Peroxide (BPO) initiators on grafting results was carried out. According to FTIR spectrum analysis, the carbonyl ester (C=O) peak at roughly 1721 cm⁻¹, indicating effective grafting, was more pronounced in the melt processing approach than in the solution procedure. This implied that melt processing resulted in higher grafting efficiency. The absorption bands in the C-H stretching region (2860-2921 cm⁻¹) and the C=C stretching area (1672 cm⁻¹) show that the underlying structure of CNR has not degraded. The carbonyl index values for each composition showed that BPO performed better than DCP in the melt treatment method, however DCP as an initiator in the solution system produced a higher grafting efficiency than BPO.
Jaringan kolaborasi para penulis
25 penulis ·
67 tautan kepenulisan bersama
· 26 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
State University of Medan Universitas Sumatera Utara University of Palangka Raya Sunan Gunung Djati State Islamic University Bandung Universiti Putra Malaysia
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ar-raniry.ac.id/index.php/lantanida/oai, pertama di-harvest 7 Nov 2026, terakhir terlihat 7 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">PENGARUH PERBEDAAN METODE MELT PROCESSING DAN SISTEM LARUT TERHADAP HASIL GRAFT KOPOLIMERISASI CYCLIC NATURAL RUBBER (CNR) DENGAN GLYCIDYL METHACRYLATE (GMA)</dc:title>
<dc:creator xml:lang="en">Eddiyanto, Eddiyanto</dc:creator>
<dc:creator xml:lang="en">Sipahutar, Rezwan Mulya</dc:creator>
<dc:creator xml:lang="en">Nurfajriani, Nurfajriani</dc:creator>
<dc:creator xml:lang="en">Pulungan, Ahmad Nasir</dc:creator>
<dc:creator xml:lang="en">Herlinawtati, Herlinawati</dc:creator>
<dc:subject xml:lang="en">CNR</dc:subject>
<dc:subject xml:lang="en">GMA</dc:subject>
<dc:subject xml:lang="en">grafting</dc:subject>
<dc:subject xml:lang="en">melt processing</dc:subject>
<dc:subject xml:lang="en">solution system</dc:subject>
<dc:description xml:lang="en">Although natural rubber has many good qualities, its commercial uses are limited by its low chemical reactivity and low heat stability. A derivative with better stability, Cyclic Natural Rubber (CNR), has to be chemically modified to increase its usefulness and broaden its range of applications. Investigating the effects of two different methods, the melt processing and solution system on the FTIR spectra of Cyclic Natural Rubber (CNR) graft copolymerization with Glycidyl Methacrylate (GMA) was the aim of this work. Additionally, an evaluation of the effect of Dicumyl Peroxide (DCP) and Benzoyl Peroxide (BPO) initiators on grafting results was carried out. According to FTIR spectrum analysis, the carbonyl ester (C=O) peak at roughly 1721 cm⁻¹, indicating effective grafting, was more pronounced in the melt processing approach than in the solution procedure. This implied that melt processing resulted in higher grafting efficiency. The absorption bands in the C-H stretching region (2860-2921 cm⁻¹) and the C=C stretching area (1672 cm⁻¹) show that the underlying structure of CNR has not degraded. The carbonyl index values for each composition showed that BPO performed better than DCP in the melt treatment method, however DCP as an initiator in the solution system produced a higher grafting efficiency than BPO.</dc:description>
<dc:publisher xml:lang="en">UIN AR-RANIRY</dc:publisher>
<dc:date>2024-12-06</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
<dc:format>application/pdf</dc:format>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://jurnal.ar-raniry.ac.id/index.php/lantanida/article/view/26272</dc:identifier>
<dc:identifier>10.22373/lj.v12i2.26272</dc:identifier>
<dc:source xml:lang="en">Lantanida Journal; Vol. 12 No. 2 (2024): July-December 2024; 124-138</dc:source>
<dc:source xml:lang="id">Lantanida Journal; Vol 12 No 2 (2024): July-December 2024; 124-138</dc:source>
<dc:source>2548-9062</dc:source>
<dc:source>2356-3133</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://jurnal.ar-raniry.ac.id/index.php/lantanida/article/view/26272/pdf</dc:relation>
<dc:relation>https://jurnal.ar-raniry.ac.id/index.php/lantanida/article/view/26272/11642</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2024 eddiyanto Eddiyanto, Rezwan Mulya Sipahutar, Rezwan Mulya Sipahutar, Rezwan Mulya Sipahutar, Nurfajriani Nurfajriani, Nurfajriani Nurfajriani, Nurfajriani Nurfajriani, Ahmad Nasir Pulungan, Ahmad Nasir Pulungan, Ahmad Nasir Pulungan, herlinawati herlinawtati, herlinawati herlinawtati, herlinawati herlinawtati</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Eddiyanto, E., Sipahutar, R. M., Nurfajriani, N., Pulungan, A. N., & Herlinawtati, H. (2024). PENGARUH PERBEDAAN METODE MELT PROCESSING DAN SISTEM LARUT TERHADAP HASIL GRAFT KOPOLIMERISASI CYCLIC NATURAL RUBBER (CNR) DENGAN GLYCIDYL METHACRYLATE (GMA). Lantanida Journal, 12(2), 124–138. https://doi.org/10.22373/lj.v12i2.26272
Salin
IEEE
E. Eddiyanto, R. M. Sipahutar, N. Nurfajriani, A. N. Pulungan, and H. Herlinawtati, “PENGARUH PERBEDAAN METODE MELT PROCESSING DAN SISTEM LARUT TERHADAP HASIL GRAFT KOPOLIMERISASI CYCLIC NATURAL RUBBER (CNR) DENGAN GLYCIDYL METHACRYLATE (GMA),” Lantanida Journal, vol. 12, no. 2, pp. 124–138, 2024, doi: 10.22373/lj.v12i2.26272.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.