Experimental validation of a dual-band printed antenna array operating at 2.45/5.8 GHz with a high efficiency for wireless power transmission applications

Abstract

This paper presents a simple dual-band antenna element with a rectangular patch designed for the industrial, scientific, and medical bands at 2.45/5.8 GHz. The antenna achieves satisfactory simulated performance at both resonant frequencies, including a reflection coefficient below -10 dB, a voltage standing wave ratio (VSWR) not exceeding 1.2, radiation efficiencies of approximately 90% at 2.45 GHz and 95.55% at 5.8 GHz, and bandwidths of 125.80 MHz around 2.45 GHz and 308.60 MHz around 5.8 GHz. Building on this single-element design, an antenna array configuration comprising two elements etched on a Taconic TLY-5 substrate is developed. The two rectangular patches are connected via a T-junction to a 50 Ω excitation port. The proposed array's effectiveness is validated through simulations using three electromagnetic solvers and experimental measurements. The fabricated antenna array demonstrates improved performance, including a measured return loss of -16.78 dB at 2.45 GHz and -20.61 dB at 5.8 GHz, a VSWR not exceeding 1.5 (1.34 and 1.22 at 2.45 and 5.8 GHz, respectively), input impedance close to 50 Ω, high gain exceeding 8 dBi, bandwidths of 179.50 MHz at 2.45 GHz and 462.90 MHz at 5.8 GHz, and high radiation efficiencies of 96.54% at 2.45 GHz and 98.65% at 5.8 GHz. With only two patches, the proposed antenna array offers a compact, efficient, and practical solution for wireless power transmission applications, particularly for small wireless devices like rectenna systems, due to its simplicity, compact design, and excellent radiation efficiency.