Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Enhanced ankle physiotherapy robot with electromyography - triggered ankle velocity control

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 15 No. 6 (2025)

DOI
10.11591/ijece.v15i6.pp5314-5326
ISSN
2722-2578, 2088-8708
Terbit
2025-12-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Previous ankle physiotherapy robots, called picobot rely on predefined trajectories continuous passive movement without considering patient intent, limiting the encouragement of user-intent motion. This study then integrates electromyography (EMG) signals as triggers into picobot with an ankle velocity-based control system. The upgraded robot activates movement in specific gait phases based on muscle activity, synchronizing therapy with the patient’s intent. Functionality test on 7 young male healthy subjects investigates leg muscles, such as Tibialis Anterior, Soleus, and Gastrocnemius muscles for the most significantly contribute to ankle movements. Then, the muscle is tested to trigger picobot movements. Functionality tests revealed the Tibialis muscle significantly contributes to gait phases 2, the Soleus is prominent in phases 3 and 4, and gastrocnemius is active on phase 1. The robot successfully performs plantarflexion when EMG signals exceed a 1.58 V threshold, reaching a target position of -0.11 rad at a constant velocity of -0.62 rad/s. These findings establish a foundation for future trials since patient testing has not yet been conducted. By promoting active participation, this innovation has the potential to enhance rehabilitation outcomes. Incorporating user-intent triggers may accelerate recovery and improve healthcare accessibility in Indonesia, offering a significant advancement in physiotherapy technologies.

Jaringan kolaborasi para penulis

22 penulis · 77 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Telkom Surabaya
  • Telkom University
  • Institut Teknologi Telkom Purwokerto
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ardiansyah Al FarouqInstitut Teknologi Telkom Surabaya2
Isa HafidzInstitut Teknologi Telkom Surabaya2
Andi Nur HalisyahInstitut Teknologi Telkom Surabaya1
Khodijah AmirohAfiliasi tidak diketahui1
Ardiansyah Al FarouqAfiliasi tidak diketahui1
Lora Khaula AmifiaInstitut Teknologi Telkom Surabaya1
Robin Addwiyansyah Alfaro SamratAfiliasi tidak diketahui1
Aditya YudhistiraAfiliasi tidak diketahui1
Ahmad HabibiAfiliasi tidak diketahui1
Vita Ayu NathaliaTelkom University1
Rifki Dwi PutrantoTelkom University1
Helmy WidyantaraInstitut Teknologi Telkom Surabaya1
Mas Aly AfandiInstitut Teknologi Telkom Purwokerto1
Billy MontolaluInstitut Teknologi Telkom Surabaya1
Wahyu Andy PrastyabudiInstitut Teknologi Telkom Surabaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Enhanced ankle physiotherapy robot with electromyography - triggered ankle velocity control</dc:title><dc:creator>Adiputra, Dimas</dc:creator><dc:creator>Nismara, Radithya Anjar</dc:creator><dc:creator>Lubis, Muhammad Rafli Ramadhan</dc:creator><dc:creator>Rizkianingtyas, Nur Aliffah</dc:creator><dc:creator>Satrio, Kensora Bintang Panji</dc:creator><dc:creator>Arif, Rangga Roospratama</dc:creator><dc:creator>Salsabila, Annisa</dc:creator><dc:description>&lt;jats:p&gt;Previous ankle physiotherapy robots, called picobot rely on predefined trajectories continuous passive movement without considering patient intent, limiting the encouragement of user-intent motion. This study then integrates electromyography (EMG) signals as triggers into picobot with an ankle velocity-based control system. The upgraded robot activates movement in specific gait phases based on muscle activity, synchronizing therapy with the patient’s intent. Functionality test on 7 young male healthy subjects investigates leg muscles, such as Tibialis Anterior, Soleus, and Gastrocnemius muscles for the most significantly contribute to ankle movements. Then, the muscle is tested to trigger picobot movements. Functionality tests revealed the Tibialis muscle significantly contributes to gait phases 2, the Soleus is prominent in phases 3 and 4, and gastrocnemius is active on phase 1. The robot successfully performs plantarflexion when EMG signals exceed a 1.58 V threshold, reaching a target position of -0.11 rad at a constant velocity of -0.62 rad/s. These findings establish a foundation for future trials since patient testing has not yet been conducted. By promoting active participation, this innovation has the potential to enhance rehabilitation outcomes. Incorporating user-intent triggers may accelerate recovery and improve healthcare accessibility in Indonesia, offering a significant advancement in physiotherapy technologies.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2025-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v15i6.pp5314-5326</dc:identifier><dc:identifier>10.11591/ijece.v15i6.pp5314-5326</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 15 No 6 (2025); 5314</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/38050/18520</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>