Melola Discovery

← Melola Discovery

Akses terbuka Jurnal

Unveiling the Signature of Halal Leather: A Comparative Study of Surface Morphology, Functional Groups and Thermal Characteristics

Indonesian Journal of Halal Research · Vol. 5 No. 2 (2023) · hlm. 67–76

DOI
10.15575/ijhar.v5i2.25702
ISSN
2657-0165, 2656-3754
Terbit
2023-08-31
Penerbit
UIN Sunan Gunung Djati Bandung
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The halal certification of products holds significant importance for Muslim consumers, necessitating the development of reliable techniques for identifying leather products made from raw materials. This study employed rapid and accurate analytical methods to distinguish between cowhide, pigskin, and artificial leather. A combination of scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC) was used to assess the variations in collagen fiber structures and thermal stability among the leather samples. The findings revealed that morphological surface analysis, including grain patterns and pores, facilitated swift differentiation between different leather types. Pigskins exhibit three-hole patterns on their morphological surface compared to cowhide, with random pores and tighter grain patterns, whereas artificial leather lacks natural grain patterns and pores altogether. While FTIR spectra exhibited similarities between cowhide and pigskin leathers, variations in vibration intensity enabled effective discrimination. Artificial leather, particularly PVC-based materials, displayed distinct spectra, allowing FTIR spectroscopy to effectively discern between halal and non-halal leather. Cowhide possesses strong and sharp vibration at wavenumber 1736, 1277, and 817 cm-1 compared to pigskin, which has stronger vibration at 1534 cm-1. Meanwhile, PVC-based artificial leather exhibited stretching at 1723 and 744 cm-1 wavenumbers. DSC analysis proved valuable in differentiating between genuine and artificial leather based on unique peaks and thermal behavior. These three techniques provide reliable means to determine the raw material origins of leather products.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 22 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik ATK Yogyakarta
  • Universitas Gadjah Mada
  • Universitas Islam Negeri Sultan Maulana Hasanuddin Banten
  • National Yang Ming Chiao Tung University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Wijayanti WijayantiPoliteknik ATK Yogyakarta1
Agus PrasetyaUniversitas Gadjah Mada1
Indra PerdanaUniversitas Gadjah Mada1
RochmadiUniversitas Gadjah Mada1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.uinsgd.ac.id/index.php/ijhar/oai, pertama di-harvest 7 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Unveiling the Signature of Halal Leather: A Comparative Study of Surface Morphology, Functional Groups and Thermal Characteristics</dc:title>
	<dc:creator>Syabani, Muh Wahyu</dc:creator>
	<dc:creator>Iswahyuni, Iswahyuni</dc:creator>
	<dc:creator>Warmiati, Warmiati</dc:creator>
	<dc:creator>Prayitno, Kutut Aji</dc:creator>
	<dc:creator>Saraswati, Henny</dc:creator>
	<dc:creator>Hernandha, Rahmandhika Firdauzha Hary</dc:creator>
	<dc:subject xml:lang="en-US">DSC</dc:subject>
	<dc:subject xml:lang="en-US">FTIR</dc:subject>
	<dc:subject xml:lang="en-US">halal</dc:subject>
	<dc:subject xml:lang="en-US">leather</dc:subject>
	<dc:subject xml:lang="en-US">SEM</dc:subject>
	<dc:description xml:lang="en-US">The halal certification of products holds significant importance for Muslim consumers, necessitating the development of reliable techniques for identifying leather products made from raw materials. This study employed rapid and accurate analytical methods to distinguish between cowhide, pigskin, and artificial leather. A combination of scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC) was used to assess the variations in collagen fiber structures and thermal stability among the leather samples. The findings revealed that morphological surface analysis, including grain patterns and pores, facilitated swift differentiation between different leather types. Pigskins exhibit three-hole patterns on their morphological surface compared to cowhide, with random pores and tighter grain patterns, whereas artificial leather lacks natural grain patterns and pores altogether. While FTIR spectra exhibited similarities between cowhide and pigskin leathers, variations in vibration intensity enabled effective discrimination. Artificial leather, particularly PVC-based materials, displayed distinct spectra, allowing FTIR spectroscopy to effectively discern between halal and non-halal leather. Cowhide possesses strong and sharp vibration at wavenumber 1736, 1277, and 817 cm-1 compared to pigskin, which has stronger vibration at 1534 cm-1. Meanwhile, PVC-based artificial leather exhibited stretching at 1723 and 744 cm-1 wavenumbers. DSC analysis proved valuable in differentiating between genuine and artificial leather based on unique peaks and thermal behavior. These three techniques provide reliable means to determine the raw material origins of leather products.</dc:description>
	<dc:publisher xml:lang="en-US">UIN Sunan Gunung Djati Bandung</dc:publisher>
	<dc:date>2023-08-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.uinsgd.ac.id/index.php/ijhar/article/view/25702</dc:identifier>
	<dc:identifier>10.15575/ijhar.v5i2.25702</dc:identifier>
	<dc:source xml:lang="en-US">Indonesian Journal of Halal Research; Vol. 5 No. 2 (2023): August; 67-76</dc:source>
	<dc:source>2657-0165</dc:source>
	<dc:source>2656-3754</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.uinsgd.ac.id/index.php/ijhar/article/view/25702/9696</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Author</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>