Melola Discovery

← Melola Discovery

Jurnal

CONSTRUCTION SPIN COATING AS PRINTING EDIBEL FILM GANYONG

Journal of Teaching and Learning Physics · Vol. 2 No. 1 (2017) · hlm. 23–28

DOI
10.15575/jotalp.v2i1.6584
ISSN
2580-3107, 2528-5505
Terbit
2017-03-01
Penerbit
UIN Sunan Gunung Djati Bandung
Bahasa
ind

Abstrak

The existence of halal and good food is a basic requirement for Muslims. Maintaining the quality of food from the integrity of nutrients and keep it away from the source of disease is one effort to create good quality food. This will be more valuable if it can be done with natural materials that exist around the community itself. Growing environmental awareness and social sensitivity on the young generation of Muslims is something that can not be separated from education in college. This research is aimed to develop bio-plastic making device based on ganyong (Canna edulis) with the utilization of used and cheap goods. The method used in the research is Research and Development (R & D). Develop Spin Coating devices to suit the needs of edible printing. The effectiveness of measurable measurements of physical bio-plastic factor measurements resulted in strength, thickness and durability. The results of this study show that the results are quite optimal, especially on the thickness factor. The thickness of bio-plastics produced using modified spin coating is <0.5 mm with rotation at a certain speed, ie at 12 volts and 60o - 80oC. The result of bio-plastic obtained can be used as food wrapper which in this research is applied as dodol wrapping. So the quality of nutrition dodol can be more durable.

Jaringan kolaborasi para penulis

40 penulis · 75 tautan kepenulisan bersama · 20 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sunan Gunung Djati State Islamic University Bandung
  • State University of Medan
  • Indonesia University of Education
  • Universiti Putra Malaysia
  • Politeknik Pelayaran Banten
  • Farhangian University
  • National Taiwan University of Science and Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tri Wahyu AgustinaSunan Gunung Djati State Islamic University Bandung3
Yaya RukayadiUniversiti Putra Malaysia2
Ragustini RagustiniPoliteknik Pelayaran Banten2
Andra Rian MulynaSunan Gunung Djati State Islamic University Bandung2
Muhammad Minan ChusniSunan Gunung Djati State Islamic University Bandung2
Milla ListiawatiSunan Gunung Djati State Islamic University Bandung2
Muslim MuslimIndonesia University of Education1
Rizky Agassy SihombingIndonesia University of Education1
Amir KarimiFarhangian University1
N.Dede UmusalamahSunan Gunung Djati State Islamic University Bandung1
Ida FaridaSunan Gunung Djati State Islamic University Bandung1
Rena Denya AgustinaSunan Gunung Djati State Islamic University Bandung1
Winda SetyaSunan Gunung Djati State Islamic University Bandung1
Tony Abdillah GumilarSunan Gunung Djati State Islamic University Bandung1
Citra Deliana Dewi SundariSunan Gunung Djati State Islamic University Bandung1
Reni Fitriani RahayuSunan Gunung Djati State Islamic University Bandung1
Eddiyanto EddiyantoState University of Medan1
Tita JuwitaningsihState University of Medan1
Nurhadi SyahputraState University of Medan1
Elda Dewi HandayaniSunan Gunung Djati State Islamic University Bandung1
Meti MaspupahSunan Gunung Djati State Islamic University Bandung1
Cica Aisyah NurlatifahAfiliasi tidak diketahui1
Sumiyati Sa’adahSunan Gunung Djati State Islamic University Bandung1
Agung praatamaAfiliasi tidak diketahui1
Hadiansah HadiansahSunan Gunung Djati State Islamic University Bandung1
Aini KhairunnisaSunan Gunung Djati State Islamic University Bandung1
Wati SusilawatiSunan Gunung Djati State Islamic University Bandung1
Lusy FajarwatiSunan Gunung Djati State Islamic University Bandung1
Ferli Septi IrwansyahSunan Gunung Djati State Islamic University Bandung1
Meila N EffendiSunan Gunung Djati State Islamic University Bandung1
Chaerul RochmanSunan Gunung Djati State Islamic University Bandung1
Enden SuhilaSunan Gunung Djati State Islamic University Bandung1
Teguh GumilarNational Taiwan University of Science and Technology1
Rafhi Febryan PuteraUniversitas Negeri Padang1
Habibah Khusna BaihaqiUniversitas Jember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.uinsgd.ac.id/index.php/jtlp/oai, pertama di-harvest 7 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">CONSTRUCTION SPIN COATING AS PRINTING EDIBEL FILM GANYONG</dc:title>
	<dc:creator>Yuningsih, Endah Kurnia</dc:creator>
	<dc:creator>Kurniati, Tuti</dc:creator>
	<dc:creator>Windayani, Neneng</dc:creator>
	<dc:creator>Zakwandi, Rizki</dc:creator>
	<dc:creator>Alawiyah, Tiana Azmi</dc:creator>
	<dc:description xml:lang="en-US">The existence of halal and good food is a basic requirement for Muslims. Maintaining the quality of food from the integrity of nutrients and keep it away from the source of disease is one effort to create good quality food. This will be more valuable if it can be done with natural materials that exist around the community itself. Growing environmental awareness and social sensitivity on the young generation of Muslims is something that can not be separated from education in college. This research is aimed to develop bio-plastic making device based on ganyong (Canna edulis) with the utilization of used and cheap goods. The method used in the research is Research and Development (R &amp;amp; D). Develop Spin Coating devices to suit the needs of edible printing. The effectiveness of measurable measurements of physical bio-plastic factor measurements resulted in strength, thickness and durability. The results of this study show that the results are quite optimal, especially on the thickness factor. The thickness of bio-plastics produced using modified spin coating is &amp;lt;0.5 mm with rotation at a certain speed, ie at 12 volts and 60o - 80oC. The result of bio-plastic obtained can be used as food wrapper which in this research is applied as dodol wrapping. So the quality of nutrition dodol can be more durable.</dc:description>
	<dc:publisher xml:lang="en-US">UIN Sunan Gunung Djati Bandung</dc:publisher>
	<dc:date>2017-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.uinsgd.ac.id/index.php/jtlp/article/view/6584</dc:identifier>
	<dc:identifier>10.15575/jotalp.v2i1.6584</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Teaching and Learning Physics; Vol. 2 No. 1 (2017): Journal of Teaching and Learning Physics (Februari 2017); 23-28</dc:source>
	<dc:source>2580-3107</dc:source>
	<dc:source>2528-5505</dc:source>
	<dc:language>ind</dc:language>
	<dc:relation>https://journal.uinsgd.ac.id/index.php/jtlp/article/view/6584/3554</dc:relation>
</oai_dc:dc>