Melola Discovery

← Melola Discovery

Jurnal

Development of Inorganic Molecular Shape Model Using 3D Printer to Strengthen Student's Conceptual Understanding

JTK (Jurnal Tadris Kimiya) · Vol. 6 No. 2 (2021) · hlm. 144–155

DOI
10.15575/jtk.v6i2.12988
ISSN
2527-9637, 2527-6816
Terbit
2021-12-31
Penerbit
Department of Chemistry Education, UIN Sunan Gunung Djati Bandung
Bahasa
eng

Abstrak

This research aims to develop a product in the form of an inorganic molecular shape model using a 3D printer, analyze the validity, practicality, effectiveness of the product, and strengthen students' conceptual understanding using the product. The method is Research and Development (R&D) based on the Analysis, Design, Development, Implementation and Evaluation (ADDIE) model. The supporting instruments for this research are product and instrument validation sheets, product readability questionnaires, pretest-posttest questions, question during the trial, observation sheets for students' conceptual understanding, and student response questionnaire to the product. The results showed that the product developed was following the ADDIE model because the five stages were carried out systematically; the product being developed has very high validity with an average percentage of 96.88%; the average percentage of practicality is 95.17%Â which is categorized as very practical, and the average percentage of effectiveness is 94.69% which is categorized as very effective; the product developed can strengthen students' conceptual understanding shown on the average percentage of conceptual understanding indicators achievement during the trial was 90.61% and the observation result was 94.69%, both of which belong to very high category. There was an increase in the average pretest value of 33.93 and post-test of 63.99. The results of the Rasch analysis after using this product showed that the consistency of students' answers was 0.71 (quite good), the quality of the items was 0.93 (very good), and the interaction between the consistency of students' answers was 0.68 (quite good). The product can be used to strengthen students' conceptual understanding on the topic of molecular shape.

Kata kunci

Jaringan kolaborasi para penulis

12 penulis · 41 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sanata Dharma University
  • Sogang University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Risnita Vicky ListyariniSanata Dharma University2
Fransisca Ditawati Nur PamenangSanata Dharma University2
L. W. WijayantiSanata Dharma University1
Mohamad Husein Asy'AriSanata Dharma University1
Wan-Zhen LeeSogang University1
Lucia Wiwid WijayantiSanata Dharma University1
Natalia Diyah HapsariSanata Dharma University1
Monica Cahyaning RatriSanata Dharma University1
Maslichah Asy’ariSanata Dharma University1
Wonkoo LeeSogang University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.uinsgd.ac.id/index.php/tadris-kimiya/oai, pertama di-harvest 7 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development of Inorganic Molecular Shape Model Using 3D Printer  to Strengthen Student's Conceptual Understanding</dc:title>
	<dc:creator>Pratama, Rizal Galih</dc:creator>
	<dc:creator>Harta, Johnsen</dc:creator>
	<dc:subject xml:lang="en-US">3D printer</dc:subject>
	<dc:subject xml:lang="en-US">conceptual understanding</dc:subject>
	<dc:subject xml:lang="en-US">inorganic molecular shape</dc:subject>
	<dc:description xml:lang="en-US">This research aims to develop a product in the form of an inorganic molecular shape model using a 3D printer, analyze the validity, practicality, effectiveness of the product, and strengthen students' conceptual understanding using the product. The method is Research and Development (R&amp;amp;D) based on the Analysis, Design, Development, Implementation and Evaluation (ADDIE) model. The supporting instruments for this research are product and instrument validation sheets, product readability questionnaires, pretest-posttest questions, question during the trial, observation sheets for students' conceptual understanding, and student response questionnaire to the product. The results showed that the product developed was following the ADDIE model because the five stages were carried out systematically; the product being developed has very high validity with an average percentage of 96.88%; the average percentage of practicality is 95.17%  which is categorized as very practical, and the average percentage of effectiveness is 94.69% which is categorized as very effective; the product developed can strengthen students' conceptual understanding shown on the average percentage of conceptual understanding indicators achievement during the trial was 90.61% and the observation result was 94.69%, both of which belong to very high category. There was an increase in the average pretest value of 33.93 and post-test of 63.99. The results of the Rasch analysis after using this product showed that the consistency of students' answers was 0.71 (quite good), the quality of the items was 0.93 (very good), and the interaction between the consistency of students' answers was 0.68 (quite good). The product can be used to strengthen students' conceptual understanding on the topic of molecular shape.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Chemistry Education,  UIN Sunan Gunung Djati Bandung</dc:publisher>
	<dc:date>2021-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.uinsgd.ac.id/index.php/tadris-kimiya/article/view/12988</dc:identifier>
	<dc:identifier>10.15575/jtk.v6i2.12988</dc:identifier>
	<dc:source xml:lang="en-US">JTK (Jurnal Tadris Kimiya); Vol. 6 No. 2 (2021); 144-155</dc:source>
	<dc:source xml:lang="id-ID">Jurnal Tadris Kimiya; Vol 6 No 2 (2021); 144-155</dc:source>
	<dc:source>2527-9637</dc:source>
	<dc:source>2527-6816</dc:source>
	<dc:source>10.15575/jtk.v6i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.uinsgd.ac.id/index.php/tadris-kimiya/article/view/12988/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Rizal Galih Pratama, Johnsen Harta</dc:rights>
</oai_dc:dc>