Akses terbuka Jurnal SINTA 1
Design Optimization of DR3AM Vapor Polishing Device for ABS 3DPrinted Parts
Advance Sustainable Science, Engineering and Technology (ASSET) · Vol. 5 No. 2 (2023)
- ISSN
- 2715-4211, 2715-4211
- Terbit
- 2023-07-31
- Penerbit
- Universitas PGRI Semarang
- Bahasa
- eng
Abstrak
3D printing is an additive manufacturing method that turns digital design into an actual product. A 3D-printed part sometimes requires post-processing to enhance its physical and mechanical properties. Acetone vapor polishing is one of those techniques which is highly beneficial in smoothing ABS 3D-printed parts. Previously, an acetone vapor polishing device has been developed which uses a mist maker. However, for a more efficient polishing method, an optimized vapor polishing device using heat has been fabricated in this study. To assess the efficiency of this device, the researchers test the dimensional accuracy, surface roughness, tensile strength, and impact strength of polished and unpolished ABS 3D-printed specimens. The findings showed that the surface smoothness of the polished cube specimens did not significantly alter its physical geometry. The tensile test reveals that the overall elasticity of the polished tensile specimen has increased significantly while the impact test also shows that the polished specimens have the capacity to sustain a resistive impact from a swinging pendulum. Thus, all testing procedures indicated that post-processing using the optimized vapor polishing device has improved the overall physical and mechanical properties of the polished specimens.
Kata kunci
Jaringan kolaborasi para penulis
30 penulis · 140 tautan kepenulisan bersama · 2 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- Bataan Peninsula State University
- University of Technology Sydney
- Afiliasi tidak diketahui
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Ray Noel M. Delda | Afiliasi tidak diketahui | 3 |
| John Kenneth J. Barinque | Bataan Peninsula State University | 3 |
| Alshaheen T. Borja | Bataan Peninsula State University | 3 |
| Jeferson C. Cubangbang | Bataan Peninsula State University | 3 |
| Ulysses Ron C. Cruz | Bataan Peninsula State University | 3 |
| Marien P. Teopengco | Bataan Peninsula State University | 3 |
| Marjorie R. Tolentino | Bataan Peninsula State University | 3 |
| Rheianne Mae C. Herrera | Bataan Peninsula State University | 3 |
| Ma. Andrea T. Blanco | Bataan Peninsula State University | 3 |
| John Carlo C. Carabeo | Bataan Peninsula State University | 3 |
| Faye Dannah B. Ramilo | Bataan Peninsula State University | 3 |
| John Renmar D. De Silva | Bataan Peninsula State University | 3 |
| Neil Oliver M. Nuqui | Bataan Peninsula State University | 3 |
| Leonard D. Tijing | University of Technology Sydney | 1 |
| Gil Cruz | Bataan Peninsula State University | 1 |
| Emmanuel Calvento Macaraeg | Bataan Peninsula State University | 1 |
| Cristina Gutierrez Rivera | Bataan Peninsula State University | 1 |
| Ronnell D. Dela Rosa | Bataan Peninsula State University | 1 |
| Jan Lloyd Buenaventura Crisostomo | Bataan Peninsula State University | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.