Akses terbuka
Jurnal
SINTA 1
Dynamic Analysis on the Safety Criteria of the Conceptual Core Design in MTR-type Research Reactor
Atom Indonesia · Vol. 44 No. 2 (2018) · hlm. 89–97
ISSN 2356-5322, 0126-1568
Terbit 2018-08-21
Penerbit National Research and Innovation Agency
Bahasa eng
Abstrak
One of thehigh-priority research activities in BATAN is designing a new MTR-type research reactor with a new fuel. The core follows a compact core model that consists of 16 fuels and 4 control rods. The increasing heat flux at the fuel will cause the temperature of the fuel and cladding to increase so that the coolant flow rate needs tobe increased. However, the coolant flow rate in the fuel element is limited by the thermal-hydraulic stability in the core. Therefore, dynamic analysis is important in evaluating the design and operation of nuclear reactor safety. The objective of this research work is to carry out a dynamic analysis for a conceptual MTR research reactor core fuelled with the low-enrichment U9Mo-Al dispersion. The calculations were performed using WIMSD-5B, Batan-2DIFF, Batan-3DIFF, POKDYN, and MTRDYN codes. Steady-state thermal-hydraulic parameters and dynamic analysis were determined using the MTRDYN code. The calculation results show that the maximum temperatures of the coolant, cladding, and fuel meat with the uranium density of 3.96 g cm-3 are 76.01 °C, 192.02 °C, and 196.24 °C, respectively. The maximum value of fuel meat temperature for safety limit is 210 °C, which means that the maximum temperatures fulfill the design limit, and therefore the reactor operates safely at the nominal power. The dynamic analysis shows that inherent safety can protect the reactor operation when insertion of reactivity occurs in the core.
Jaringan kolaborasi para penulis
7 penulis ·
15 tautan kepenulisan bersama
· 10 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
National Nuclear Energy Agency of Indonesia Tokyo City University Universitas Tribhuwana Tunggadewi Japan Atomic Energy Agency
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://atomindonesia.brin.go.id/index.php/aij/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Dynamic Analysis on the Safety Criteria of the Conceptual Core Design in MTR-type Research Reactor</dc:title>
<dc:creator>Surbakti, T.</dc:creator>
<dc:creator>Pinem, S.</dc:creator>
<dc:creator>Suparlina, L.</dc:creator>
<dc:subject xml:lang="en-US">MTR-type research reactor; Control rod velocity; High uranium density; MTR-DYN code</dc:subject>
<dc:description xml:lang="en-US">One of thehigh-priority research activities in BATAN is designing a new MTR-type research reactor with a new fuel. The core follows a compact core model that consists of 16 fuels and 4 control rods. The increasing heat flux at the fuel will cause the temperature of the fuel and cladding to increase so that the coolant flow rate needs tobe increased. However, the coolant flow rate in the fuel element is limited by the thermal-hydraulic stability in the core. Therefore, dynamic analysis is important in evaluating the design and operation of nuclear reactor safety. The objective of this research work is to carry out a dynamic analysis for a conceptual MTR research reactor core fuelled with the low-enrichment U9Mo-Al dispersion. The calculations were performed using WIMSD-5B, Batan-2DIFF, Batan-3DIFF, POKDYN, and MTRDYN codes. Steady-state thermal-hydraulic parameters and dynamic analysis were determined using the MTRDYN code. The calculation results show that the maximum temperatures of the coolant, cladding, and fuel meat with the uranium density of 3.96 g cm-3 are 76.01 °C, 192.02 °C, and 196.24 °C, respectively. The maximum value of fuel meat temperature for safety limit is 210 °C, which means that the maximum temperatures fulfill the design limit, and therefore the reactor operates safely at the nominal power. The dynamic analysis shows that inherent safety can protect the reactor operation when insertion of reactivity occurs in the core.</dc:description>
<dc:publisher xml:lang="en-US">National Research and Innovation Agency</dc:publisher>
<dc:contributor xml:lang="en-US">National Nuclear Energy Agency (BATAN)</dc:contributor>
<dc:date>2018-08-21</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://atomindonesia.brin.go.id/index.php/aij/article/view/545</dc:identifier>
<dc:identifier>10.17146/aij.2018.545</dc:identifier>
<dc:source xml:lang="en-US">Atom Indonesia; Vol 44, No 2 (2018): August 2018; 89-97</dc:source>
<dc:source>2356-5322</dc:source>
<dc:source>0126-1568</dc:source>
<dc:source>10.55981/aij.v44i2</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/view/545/609</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1130</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1119</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1120</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1121</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1122</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1123</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1124</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1126</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1127</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1128</dc:relation>
<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/downloadSuppFile/545/1129</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2018 Atom Indonesia</dc:rights>
<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-nc-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Surbakti, T., Pinem, S., & Suparlina, L. (2018). Dynamic Analysis on the Safety Criteria of the Conceptual Core Design in MTR-type Research Reactor. Atom Indonesia, 44(2), 89–97. https://doi.org/10.17146/aij.2018.545
Salin
IEEE
T. Surbakti, S. Pinem, and L. Suparlina, “Dynamic Analysis on the Safety Criteria of the Conceptual Core Design in MTR-type Research Reactor,” Atom Indonesia, vol. 44, no. 2, pp. 89–97, 2018, doi: 10.17146/aij.2018.545.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.