Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The Influence of Heat Treatment Time and Temperature on the Physical Properties of Assab-Corax Steel

Atom Indonesia · Vol. 31 No. 2 (2011) · hlm. 91–102

DOI
10.17146/aij.2005.363
ISSN
2356-5322, 0126-1568
Terbit
2011-12-16
Penerbit
National Research and Innovation Agency
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0

Abstrak

X-ray diffraction experiment was carried out on commercial Assab-Corax steel sample. The polished samples are then heated to various temperature for different holding time; 200 oC for 4 hours, 300 oC for 4 hours, 400oC for 6-, 8-, 12- and 16 hours, 500 oC for 4 hours and 600 oC for 4 hours. The refinement of the diffraction intensity was carried out using the Im3m model, and the results show that the Carbon atoms are distributed among the base position in the body centered cubic unit cell at the eight-fold octahedral interstitial sites. Using the refined structural parameters, thermo-physical properties such as Debye temperature and coefficient of thermal expansion are calculated. From the results of the analysis it could be concluded that Debye temperature in Assab-Corrax steels tend to decrease with increasing heat-treatment time but tend to increase with heat treatment temperature. The coefficients of linear expansion also tend to decrease with increasing heat-treatment time and tend to increase with heat treatment temperature. Although the patterns are different, for example when the Debye temperature reaches its peak value for heat treatment time of 8 hours, the coefficient of linear expansion would reach its low point at this time. Therefore, the general finding is that both treatment-temperature and – time are influential to the physical properties of Assab-Corrax steels and x-ray diffraction methods could be utilized in elucidating these important findings.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 60 tautan kepenulisan bersama · 24 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Nuclear Energy Agency of Indonesia
  • Indonesian Institute of Sciences
  • Queensland University of Technology
  • Korea Atomic Energy Research Institute
  • High Energy Accelerator Research Organization
  • National Research and Innovation Agency
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
M. DaniAfiliasi tidak diketahui2
Bandriyana BandriyanaNational Nuclear Energy Agency of Indonesia1
Imam wahyonoNational Nuclear Energy Agency of Indonesia1
Agus Hadi IsmoyoNational Nuclear Energy Agency of Indonesia1
PD KillenQueensland University of Technology1
A. RafterryQueensland University of Technology1
A. InsaniNational Nuclear Energy Agency of Indonesia1
Tri Hardi PriyantoNational Nuclear Energy Agency of Indonesia1
Takashi KamiyamaHigh Energy Accelerator Research Organization1
Teguh Yulius Surya Panca PutraNational Nuclear Energy Agency of Indonesia1
D DeswitaNational Nuclear Energy Agency of Indonesia1
Hery MugiraharjoNational Nuclear Energy Agency of Indonesia1
Engkir SukirmanNational Nuclear Energy Agency of Indonesia1
S. LeeKorea Atomic Energy Research Institute1
Anis KristianiNational Research and Innovation Agency1
Dyah StyariniIndonesian Institute of Sciences1
Fauzan AuliaIndonesian Institute of Sciences1
Yanni SudiyaniIndonesian Institute of Sciences1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://atomindonesia.brin.go.id/index.php/aij/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Influence of Heat Treatment Time and Temperature on the Physical Properties of Assab-Corax Steel</dc:title>
	<dc:creator>Jahja, A.K.</dc:creator>
	<dc:creator>Parikin, Parikin</dc:creator>
	<dc:creator>Effendi, N.</dc:creator>
	<dc:subject xml:lang="en-US">Assab-Corrax steel, X-ray diffraction, Debye temperature, Rietveld refinement</dc:subject>
	<dc:description xml:lang="en-US">X-ray diffraction experiment was carried out on commercial Assab-Corax steel sample. The polished samples are then heated to various temperature for different holding time; 200 oC  for 4 hours, 300 oC for 4 hours,  400oC for 6-, 8-, 12- and 16 hours, 500 oC for 4 hours and 600 oC for 4 hours. The refinement of the diffraction intensity was carried out using the Im3m model, and the results show that the Carbon atoms are distributed among the base position in the body centered cubic unit cell at the eight-fold octahedral interstitial sites. Using the refined structural parameters, thermo-physical properties such as Debye temperature and coefficient of thermal expansion are calculated. From the results of the analysis it could be concluded that Debye temperature in Assab-Corrax steels tend to decrease with increasing heat-treatment time but tend to increase with heat treatment temperature. The coefficients of linear expansion also tend to decrease with increasing heat-treatment time and tend to increase with heat treatment temperature. Although the patterns are different, for example when the Debye temperature reaches its peak value for heat treatment time of  8 hours, the coefficient of linear expansion would reach its low point at this time. Therefore, the general finding is that both treatment-temperature and – time are influential to the physical properties of  Assab-Corrax steels and x-ray diffraction methods could be utilized in elucidating these important findings.</dc:description>
	<dc:publisher xml:lang="en-US">National Research and Innovation Agency</dc:publisher>
	<dc:contributor xml:lang="en-US">National Nuclear Energy Agency of Indonesia</dc:contributor>
	<dc:date>2011-12-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://atomindonesia.brin.go.id/index.php/aij/article/view/363</dc:identifier>
	<dc:identifier>10.17146/aij.2005.363</dc:identifier>
	<dc:source xml:lang="en-US">Atom Indonesia; Vol 31, No 2 (2005): July 2005; 91-102</dc:source>
	<dc:source>2356-5322</dc:source>
	<dc:source>0126-1568</dc:source>
	<dc:source>10.17146/aij.2005.%x</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/view/363/295</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 Atom Indonesia</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-nc-sa/4.0</dc:rights>
</oai_dc:dc>