Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Rolling and Annealing Effects on Microstructure and Hardness of Commercial 405 Stainless Steel

Atom Indonesia · Vol. 33 No. 2 (2012) · hlm. 79–95

DOI
10.17146/aij.2007.109
ISSN
2356-5322, 0126-1568
Terbit
2012-01-12
Penerbit
National Research and Innovation Agency
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0

Abstrak

The cold-rolling experiments for several values of true strain namely 5 percent, 10 percent, and 15 percent respectively have been carried out on commercial SS-405 steel samples at 350oC; the as-rolled samples were cut into several pieces in size of 10 x 10 x 5 mm3, and some pieces were annealed to 550oC for 24 hours. All samples were then mounted and polished before etching in order to observe the grain boundaries. The microstructure observation on all samples was carried out by using optical microscope (MO), meanwhile X-ray diffraction technique was employed in order to support the identification of the existing phases and to verify changes with respect to crystal orientation; the hardness tests were carried out by using Vickers micro hardness tester. The microstructure observation supported by X-ray diffraction results shows that the phase grains of rolled sample tends to take the oblong-shape, accompanied by a preferred orientation predominantly inclined toward the (110) plane. The microhardness testing results show that there has been an increase in the hardness of the as-rolled samples; Mainly because of the nearly negligible thickness of the original sample (being only 5 mm in size), the 15 percent as-rolled samples exhibits only a slight reduction in hardness compared to the 10 percent as-rolled samples; The main cause of this effect is the movement of some dislocations infiltrating the surface resulting in the reduction of the inner-stress in the bulk of the samples. In the rolled-annealed samples there is a very significant reduction in hardness compared to the as-rolled samples. Here the main cause is the recrystallization process taking place during annealing, which tends to significantly reduce the dislocations.

Kata kunci

Jaringan kolaborasi para penulis

16 penulis · 51 tautan kepenulisan bersama · 22 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Nuclear Energy Agency of Indonesia
  • Indonesian Institute of Sciences
  • Korea Atomic Energy Research Institute
  • High Energy Accelerator Research Organization
  • National Research and Innovation Agency
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Parikin ParikinNational Nuclear Energy Agency of Indonesia2
A. InsaniNational Nuclear Energy Agency of Indonesia1
Tri Hardi PriyantoNational Nuclear Energy Agency of Indonesia1
Takashi KamiyamaHigh Energy Accelerator Research Organization1
Teguh Yulius Surya Panca PutraNational Nuclear Energy Agency of Indonesia1
D DeswitaNational Nuclear Energy Agency of Indonesia1
Hery MugiraharjoNational Nuclear Energy Agency of Indonesia1
Engkir SukirmanNational Nuclear Energy Agency of Indonesia1
S. LeeKorea Atomic Energy Research Institute1
Anis KristianiNational Research and Innovation Agency1
Dyah StyariniIndonesian Institute of Sciences1
Fauzan AuliaIndonesian Institute of Sciences1
Yanni SudiyaniIndonesian Institute of Sciences1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://atomindonesia.brin.go.id/index.php/aij/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Rolling and Annealing Effects on Microstructure and Hardness of Commercial 405 Stainless Steel</dc:title>
	<dc:creator>Jahja, A.K.</dc:creator>
	<dc:creator>Effendi, N.</dc:creator>
	<dc:creator>Dani, M.</dc:creator>
	<dc:subject xml:lang="en-US">Commercial SS-405; Cold-rolling; Inner-Stress</dc:subject>
	<dc:description xml:lang="en-US">The cold-rolling experiments for several values of true strain namely 5 percent, 10 percent, and 15 percent respectively have been carried out on commercial SS-405 steel samples at 350oC; the as-rolled samples were cut into several pieces in size of 10 x 10 x 5 mm3, and some pieces were annealed to 550oC for 24 hours. All samples were then mounted and polished before etching in order to observe the grain boundaries. The microstructure observation on all samples was carried out by using optical microscope (MO), meanwhile X-ray diffraction technique was employed in order to support the identification of the existing phases and to verify changes with respect to crystal orientation; the hardness tests were carried out by using Vickers micro hardness tester. The microstructure observation supported by X-ray diffraction results shows that the phase grains of rolled sample tends to take the oblong-shape, accompanied by a preferred orientation predominantly inclined toward the (110) plane. The microhardness testing results show that there has been an increase in the hardness of the as-rolled samples; Mainly because of the nearly negligible thickness of the original sample (being only 5 mm in size), the 15 percent as-rolled samples exhibits only a slight reduction in hardness compared to the 10 percent as-rolled samples; The main cause of this effect is the movement of some dislocations infiltrating the surface resulting in the reduction of the inner-stress in the bulk of the samples. In the rolled-annealed samples there is a very significant reduction in hardness compared to the as-rolled samples. Here the main cause is the recrystallization process taking place during annealing, which tends to significantly reduce the dislocations.</dc:description>
	<dc:publisher xml:lang="en-US">National Research and Innovation Agency</dc:publisher>
	<dc:contributor xml:lang="en-US">National Nuclear Energy Agency of Indonesia</dc:contributor>
	<dc:date>2012-01-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://atomindonesia.brin.go.id/index.php/aij/article/view/109</dc:identifier>
	<dc:identifier>10.17146/aij.2007.109</dc:identifier>
	<dc:source xml:lang="en-US">Atom Indonesia; Vol 33, No 2 (2007): July 2007; 79-95</dc:source>
	<dc:source>2356-5322</dc:source>
	<dc:source>0126-1568</dc:source>
	<dc:source>10.17146/aij.2007.%x</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://atomindonesia.brin.go.id/index.php/aij/article/view/109/81</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 Atom Indonesia</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-nc-sa/4.0</dc:rights>
</oai_dc:dc>