Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effects of Injection Pressure on Output Power, BTE, SFC and Opacity in a Typical Single-Cylinder Diesel Engine

Automotive Experiences · Vol. 3 No. 1 (2020) · hlm. 20–26

DOI
10.31603/ae.v3i1.3006
ISSN
2615-6636, 2615-6202
Terbit
2020-04-06
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

On a single-cylinder diesel engine, injection pressure can be adjusted by changing the thickness of the injector shim. In this study, the injection pressure of 180 bar (standard), 190 bar (+1mm shim), and 210 bar (+2mm shim) was examined on a typical single-cylinder diesel engine with pure diesel fuel. The tests carried out at a constant engine speed of 1500 rpm with load variations of 650, 1300, 1950, and 3600 Watts to investigate the effect of injection pressure on output power, brake thermal efficiency (BTE), specific fuel consumption (SFC) and opacity. The results showed that increasing injection pressure could increase the output power by 19.3% and 17.4% by adding 1 mm and 2 mm shims, respectively. SFC decreased 1.97% and 12.3% compared to standard conditions and opacity with 2 mm shim was lower than 1 mm shim. In conclusion, increasing the injection pressure from 180 to 210 bar by adding 2 mm shim can improve the performance of a single cylinder diesel engine, which includes output power, brake thermal efficiency (BTE), specific fuel consumption (SFC) and opacity.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 58 tautan kepenulisan bersama · 29 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Madiun
  • Universitas Buana Perjuangan Karawang
  • Sekolah Tinggi Teknologi Wastukancana
  • Universitas Muhammadiyah Magelang
  • University of Kuala Lumpur
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Agus WahyudiAfiliasi tidak diketahui1
Suroto MunaharUniversitas Muhammadiyah Magelang1
Sodiq KamalUniversitas Muhammadiyah Magelang1
Yoshifumi ItoAfiliasi tidak diketahui1
Amin RaisSekolah Tinggi Teknologi Wastukancana1
Choirul AnwarSekolah Tinggi Teknologi Wastukancana1
Sukarman SukarmanSekolah Tinggi Teknologi Wastukancana1
Amri AbdulahSekolah Tinggi Teknologi Wastukancana1
Khoirudin KhoirudinUniversitas Buana Perjuangan Karawang1
Murtalim MurtalimUniversitas Buana Perjuangan Karawang1
Fathan Mubina DewadiUniversitas Buana Perjuangan Karawang1
Nana RahdianaUniversitas Buana Perjuangan Karawang1
Agus Choirul ArifinPoliteknik Negeri Madiun1
Alfi Tranggono Agus SalimPoliteknik Negeri Madiun1
Agus Ma’ruf PrasetyaPoliteknik Negeri Madiun1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Effects of Injection Pressure on Output Power, BTE, SFC and Opacity in a Typical Single-Cylinder Diesel Engine</dc:title>
	<dc:creator xml:lang="en">Majedi, Farid</dc:creator>
	<dc:creator xml:lang="en">Setiyaningrum, Denik</dc:creator>
	<dc:creator xml:lang="en">Hidayahtullah, Setyono M. T.</dc:creator>
	<dc:creator xml:lang="en">Abbas, Aries</dc:creator>
	<dc:subject xml:lang="en">Diesel engine</dc:subject>
	<dc:subject xml:lang="en">Injection pressure</dc:subject>
	<dc:subject xml:lang="en">Output power</dc:subject>
	<dc:subject xml:lang="en">BTE</dc:subject>
	<dc:subject xml:lang="en">SFC</dc:subject>
	<dc:subject xml:lang="en">Opacity</dc:subject>
	<dc:description xml:lang="en">On a single-cylinder diesel engine, injection pressure can be adjusted by changing the thickness of the injector shim. In this study, the injection pressure of 180 bar (standard), 190 bar (+1mm shim), and 210 bar (+2mm shim) was examined on a typical single-cylinder diesel engine with pure diesel fuel. The tests carried out at a constant engine speed of 1500 rpm with load variations of 650, 1300, 1950, and 3600 Watts to investigate the effect of injection pressure on output power, brake thermal efficiency (BTE), specific fuel consumption (SFC) and opacity. The results showed that increasing injection pressure could increase the output power by 19.3% and 17.4% by adding 1 mm and 2 mm shims, respectively. SFC decreased 1.97% and 12.3% compared to standard conditions and opacity with 2 mm shim was lower than 1 mm shim. In conclusion, increasing the injection pressure from 180 to 210 bar by adding 2 mm shim can improve the performance of a single cylinder diesel engine, which includes output power, brake thermal efficiency (BTE), specific fuel consumption (SFC) and opacity.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2020-04-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/3006</dc:identifier>
	<dc:identifier>10.31603/ae.v3i1.3006</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 3 No. 1 (2020); 20-26</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:source>10.31603/ae.v3i1</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/3006/1669</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 Farid Majedi, Denik Setiyaningrum, Setyono M. T. Hidayahtullah, Aries Abbas</dc:rights>
</oai_dc:dc>