Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Influence of Compression Ratio on Flywheel Dimension for a Naturally Aspirated Spark Ignition Engine: A Numerical Study

Automotive Experiences · Vol. 3 No. 2 (2020) · hlm. 46–56

DOI
10.31603/ae.v3i2.3530
ISSN
2615-6636, 2615-6202
Terbit
2020-05-24
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

The proper design of the flywheel undeniably determines in tuning the engine to confirm the better output engine performance. The aim of this study is to mathematically investigate the effect of various values of the compression ratio on some essential parameters to determine the appropriate value for the flywheel dimension. A numerical calculation approach was proposed to eventually determine the dimension of the engine flywheel on a five-cylinder four-stroke Spark Ignition (SI) engine. The various compression ratios of 8.5, 9, 9.5, 10, 10.5, and 11 were selected to perform the calculations. The effects of compression ratio on effective pressure, indicated mean effective pressure (IMEP), dynamic irregularity value of the crankshaft, and the diameter of the flywheel was clearly investigated. The study found that 2.5 increment value of the compression ratio significantly increases the effective pressure of about 41.53% on the starting of the expansion stroke. While at the end of the compression stroke, the rise of effective pressure is about 76.67%, and the changes in dynamic irregularity merely increase by about 1.79%. The same trend applies to the flywheel diameter and width, which increases 2.08% for both.

Kata kunci

Jaringan kolaborasi para penulis

6 penulis · 7 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Yogyakarta State University
  • Politecnico di Torino
  • Technische Universität Dresden
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Wayan AdiyasaYogyakarta State University1
Afri YudantokoTechnische Universität Dresden1
Herminarto SofyanYogyakarta State University1
Atmoko Putra PratamaYogyakarta State University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Influence of Compression Ratio on Flywheel Dimension for a Naturally Aspirated Spark Ignition Engine: A Numerical Study</dc:title>
	<dc:creator xml:lang="en">Yudianto, Aan</dc:creator>
	<dc:creator xml:lang="en">Li, Peixuan</dc:creator>
	<dc:subject xml:lang="en">Flywheel Dimension</dc:subject>
	<dc:subject xml:lang="en">Compression Ratio</dc:subject>
	<dc:subject xml:lang="en">Combustion Engine</dc:subject>
	<dc:description xml:lang="en">The proper design of the flywheel undeniably determines in tuning the engine to confirm the better output engine performance. The aim of this study is to mathematically investigate the effect of various values of the compression ratio on some essential parameters to determine the appropriate value for the flywheel dimension. A numerical calculation approach was proposed to eventually determine the dimension of the engine flywheel on a five-cylinder four-stroke Spark Ignition (SI) engine. The various compression ratios of 8.5, 9, 9.5, 10, 10.5, and 11 were selected to perform the calculations. The effects of compression ratio on effective pressure, indicated mean effective pressure (IMEP), dynamic irregularity value of the crankshaft, and the diameter of the flywheel was clearly investigated. The study found that 2.5 increment value of the compression ratio significantly increases the effective pressure of about 41.53% on the starting of the expansion stroke. While at the end of the compression stroke, the rise of effective pressure is about 76.67%, and the changes in dynamic irregularity merely increase by about 1.79%. The same trend applies to the flywheel diameter and width, which increases 2.08% for both.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2020-05-24</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/3530</dc:identifier>
	<dc:identifier>10.31603/ae.v3i2.3530</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 3 No. 2 (2020); 46-56</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:source>10.31603/ae.v3i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/3530/1835</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 Aan Yudianto, Peixuan Li</dc:rights>
</oai_dc:dc>