Melola Discovery

← Melola Discovery

Jurnal SINTA 1

An Experimental Study of the Addition of Air Mass Flow Rate Using a 30% Emulsion-Fueled Diesel Engine at High Load

Automotive Experiences · Vol. 3 No. 2 (2020) · hlm. 57–67

DOI
10.31603/ae.v3i2.3618
ISSN
2615-6636, 2615-6202
Terbit
2020-06-17
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

The purpose of this study was to examine the addition of air mass flow rate into the combustion chamber using E30 emulsion fuel (Water 70% + Dex 30% + 2% surfactant tween 80 + span 80 ) on a Diamond DI 800 stationary diesel engine with an engine rotation of 1500 rpm. Characteristics evaluated using Combustion Analyze, and emissions measured with a Gas Analyzer. The results showed the addition of air mass flow rate affected engine performance and emissions with the engine power observed to have decreased by 0.016% while SFC and thermal efficiency increased by 2,077% and 33,053% respectively compared to diesel fuel. Moreover, the BMEP and exhaust temperature also decreased with the most optimum in BMEP found to be 0.02% and exhaust temperature at 285°C while diesel has 358°C. The analysis of the combustion process for E30 emulsion fuel with variations in the air mass flow rate added showed the peak cylinder pressure at high loads was at 0.018 kg/s at a pressure of 5.86 bar. Meanwhile, the optimum heat release rate at high loads was obtained at a variation of 0.013 kg/s. This, therefore, means adding air mass flow rate to the E30 emulsion fuel has the ability to improve performance and reduce engine emissions.

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 93 tautan kepenulisan bersama · 61 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Universitas Negeri Padang
  • Politeknik Negeri Banjarmasin
  • Universitas Tidar
  • University of Singaperbangsa Karawang
  • Pertamina (Indonesia)
  • Andalas University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dori YuvendaUniversitas Negeri Padang2
Arif Rahman SalehUniversitas Tidar1
Sigit MujiartoUniversitas Tidar1
Hamzah FansuriInstitut Teknologi Sepuluh Nopember1
Muji SetiyoUniversitas Muhammadiyah Magelang1
Randi Purnama PutraUniversitas Negeri Padang1
Jamaludin JamaludinInstitut Teknologi Sepuluh Nopember1
Oki MurazaPertamina (Indonesia)1
Remon LapisaUniversitas Negeri Padang1
Krismadinata KrismadinataUniversitas Negeri Padang1
Rahadian ZainulUniversitas Negeri Padang1
Asnil AsnilAndalas University1
Sri Rizki Putri PrimandariUniversitas Negeri Padang1
Muhammad Firdaus JauhariPoliteknik Negeri Banjarmasin1
Sairaji SairajiPoliteknik Negeri Banjarmasin1
Ary Hewu HawinoPoliteknik Negeri Banjarmasin1
Zaky AbdillahPoliteknik Negeri Banjarmasin1
Mohammad Khoirul EffendiInstitut Teknologi Sepuluh Nopember1
Kristian IsmailNational Research and Innovation Agency1
Arif WahjudiInstitut Teknologi Sepuluh Nopember1
Rozy Aini HirowatiInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">An Experimental Study of the Addition of Air Mass Flow Rate Using a 30% Emulsion-Fueled Diesel Engine at High Load</dc:title>
	<dc:creator xml:lang="en">Rosid, Rosid</dc:creator>
	<dc:creator xml:lang="en">Sudarmanta, Bambang</dc:creator>
	<dc:creator xml:lang="en">Atmaja, Lukman</dc:creator>
	<dc:creator xml:lang="en">Özer, Salih</dc:creator>
	<dc:subject xml:lang="en">Diesel engine</dc:subject>
	<dc:subject xml:lang="en">Mass flow rate</dc:subject>
	<dc:subject xml:lang="en">Emulsion`</dc:subject>
	<dc:subject xml:lang="en">BMEP</dc:subject>
	<dc:description xml:lang="en">The purpose of this study was to examine the addition of air mass flow rate into the combustion chamber using E30 emulsion fuel (Water 70% + Dex 30% + 2% surfactant tween 80 + span 80 ) on a Diamond DI 800 stationary diesel engine with an engine rotation of 1500 rpm. Characteristics evaluated using Combustion Analyze, and emissions measured with a Gas Analyzer. The results showed the addition of air mass flow rate affected engine performance and emissions with the engine power observed to have decreased by 0.016% while SFC and thermal efficiency increased by 2,077% and 33,053% respectively compared to diesel fuel. Moreover, the BMEP and exhaust temperature also decreased with the most optimum in BMEP found to be 0.02% and exhaust temperature at 285°C while diesel has 358°C. The analysis of the combustion process for E30 emulsion fuel with variations in the air mass flow rate added showed the peak cylinder pressure at high loads was at 0.018 kg/s at a pressure of 5.86 bar. Meanwhile, the optimum heat release rate at high loads was obtained at a variation of 0.013 kg/s. This, therefore, means adding air mass flow rate to the E30 emulsion fuel has the ability to improve performance and reduce engine emissions.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2020-06-17</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/3618</dc:identifier>
	<dc:identifier>10.31603/ae.v3i2.3618</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 3 No. 2 (2020); 57-67</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:source>10.31603/ae.v3i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/3618/1837</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 Rosid Rosid, Bambang Sudarmanta, Lukman Atmaja, Salih Özer</dc:rights>
</oai_dc:dc>