Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Evaluation of Operational Loading of the Light-Rail Transit (LRT) in Capital Region, Indonesia

Automotive Experiences · Vol. 3 No. 3 (2020) · hlm. 104–114

DOI
10.31603/ae.v3i3.3882
ISSN
2615-6636, 2615-6202
Terbit
2020-09-30
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

In 2015, the Indonesian government issued regulations to accelerate the implementation of integrated Light-Rail Transit (LRT) in the capital region and its surroundings. In order to ensure its operational safety, experimental work is required to test components’ strength of the manufactured LRT structures. Following the JIS 7105 standard test method, the strain and deflection of the structures were measured by vertical load, compression, rotation, and three-point load support test. The critical area estimated in the railroad structure were conducted according to the finite element method, in which strain gauges are installed in areas where the stress concentration exceeds nominal pressure, namely notches, bends, and junction areas. The result shows that the maximum stress on the LRT train structure occurs at the door, where maximum compressive strain value is -1082 μe » -75.74 MPa on the left and the maximum tensile strain value is 597 μe » 41.79 MPa at the right door. The results of fatigue load analysis represent the average stress (σm) and voltage amplitude (σa) at the coordinate system located in the Søderberg triangle. Meanwhile, the camber value with the full vertical load still has a positive value of 3.03 mm, which indicates a safe limit.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 122 tautan kepenulisan bersama · 67 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Universitas Muhammadiyah Magelang
  • Universitas Halu Oleo
  • Politeknik Negeri Semarang
  • Badan Pengkajian dan Penerapan Teknologi
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Indian Maritime University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Aditya KolakotiIndian Maritime University9
Muhammad Latifur RochmanUniversitas Muhammadiyah Magelang7
R. ThirunavukkarasuAfiliasi tidak diketahui6
Tuessi Ari PurnomoUniversitas Muhammadiyah Magelang5
Budi HaryantoNational Research and Innovation Agency5
Budi WaluyoUniversitas Muhammadiyah Magelang4
Dori YuvendaUniversitas Negeri Padang4
Makmuri NuraminNational Research and Innovation Agency4
Mustasyar PerkasaNational Research and Innovation Agency3
Indra Chandra SetiawanPancasila University3
Asep Bayu Dani NandiyantoIndonesia University of Education3
Bagiyo Condro PurnomoUniversitas Muhammadiyah Magelang2
Ogi IvanoBadan Pengkajian dan Penerapan Teknologi2
Abdul Rohman FaridAfiliasi tidak diketahui2
Retno RusdjijatiUniversitas Muhammadiyah Magelang2
Margana MarganaPoliteknik Negeri Semarang2
Marliyati MarliyatiPoliteknik Negeri Semarang2
Yusuf Dewantoro HerlambangPoliteknik Negeri Semarang2
Wahyu SulistiyoPoliteknik Negeri Semarang2
Nanang ApriandiPoliteknik Negeri Semarang2
Jin‐Cherng ShyuNational Kaohsiung University of Science and Technology2
Mohammad RosyidiNational Research and Innovation Agency2
Abdulkareem Sh. Mahdi Al‐ObaidiTaylor's University2
Hendry Y. NanlohyUniversitas Sains dan Teknologi Jayapura2
Yudi IrawadiNational Research and Innovation Agency2
Budi HaryantoNational Research and Innovation Agency2
Sunaryo SunaryoUniversitas Sains Al-Qur'an2
Deni Fajar FitriyanaState University of Semarang2
Januar Parlaungan SiregarUniversiti Malaysia Pahang Al-Sultan Abdullah2
Rifky IsmailDiponegoro University2
Andi KhaeruniUniversitas Halu Oleo1
Teguh WijayantoUniversitas Halu Oleo1
Indriyani NurUniversitas Halu Oleo1
Agus KurniaUniversitas Halu Oleo1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Evaluation of Operational Loading of the Light-Rail Transit (LRT) in Capital Region, Indonesia</dc:title>
	<dc:creator xml:lang="en">Karmiadji, Djoko Wahyu</dc:creator>
	<dc:creator xml:lang="en">Gozali, Muchamad</dc:creator>
	<dc:creator xml:lang="en">Anwar, Anwar</dc:creator>
	<dc:creator xml:lang="en">Purnomo, Hedi</dc:creator>
	<dc:creator xml:lang="en">Setiyo, Muji</dc:creator>
	<dc:creator xml:lang="en">Junid, Ramli</dc:creator>
	<dc:subject xml:lang="en">LRT</dc:subject>
	<dc:subject xml:lang="en">Al 6005</dc:subject>
	<dc:subject xml:lang="en">JIS 7105</dc:subject>
	<dc:subject xml:lang="en">Strain</dc:subject>
	<dc:subject xml:lang="en">Stress</dc:subject>
	<dc:description xml:lang="en">In 2015, the Indonesian government issued regulations to accelerate the implementation of integrated Light-Rail Transit (LRT) in the capital region and its surroundings. In order to ensure its operational safety, experimental work is required to test components’ strength of the manufactured LRT structures. Following the JIS 7105 standard test method, the strain and deflection of the structures were measured by vertical load, compression, rotation, and three-point load support test. The critical area estimated in the railroad structure were conducted according to the finite element method, in which strain gauges are installed in areas where the stress concentration exceeds nominal pressure, namely notches, bends, and junction areas. The result shows that the maximum stress on the LRT train structure occurs at the door, where maximum compressive strain value is -1082 μe » -75.74 MPa on the left and the maximum tensile strain value is 597 μe » 41.79 MPa at the right door. The results of fatigue load analysis represent the average stress (σm) and voltage amplitude (σa) at the coordinate system located in the Søderberg triangle. Meanwhile, the camber value with the full vertical load still has a positive value of 3.03 mm, which indicates a safe limit.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2020-09-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/3882</dc:identifier>
	<dc:identifier>10.31603/ae.v3i3.3882</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 3 No. 3 (2020); 104-114</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:source>10.31603/ae.v3i3</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/3882/1925</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 Djoko Wahyu Karmiadji, Muchamad Gozali, Anwar Anwar, Hedi Purnomo, Muji Setiyo, Ramli Junid</dc:rights>
</oai_dc:dc>