Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effects of Rice Husk Particles Size as A Reinforcement Component on Resin-Based Brake Pad Performance: From Literature Review on the Use of Agricultural Waste as A Reinforcement Material, Chemical Polymerization Reaction of Epoxy Resin, to Experiments

Automotive Experiences · Vol. 4 No. 2 (2021) · hlm. 68–82

DOI
10.31603/ae.4815
ISSN
2615-6636, 2615-6202
Terbit
2021-05-24
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

This study aims to investigate the effect of rice husks’ particle size on resin-based brake pad performance (i.e. compressive strength, puncture strength, mass loss, wear rate, friction coefficient, and heat resistance). Bisphenol A-epichlorohydrin and cycloaliphatic amine were mixed to form resin and used as the brake pad's base material. In the experiment, rice husk with a specific particle size (i.e., 250, 500, dan 1000 μm) was added to the resin. Rice husk has received considerable interest due to its lignin, cellulose, and silica content, making it suitable as friction material due to its ceramic-like behavior. The experimental results showed small rice husk particles improved compressive strength, puncture strength, and bulk density. This can be obtained from the analysis of the maximum compressive strength for brake pad supported by particles with sizes of 250, 500, and 1000 μm having values of 0.238; 0.173; and 0.144 MPa, respectively. In contrast, large particles formed coarse surfaces and pores, decreased mass loss rate, and improve friction properties (i.e. wear rate, friction coefficient). The friction coefficient values of brake pad supported by particles with sizes of 250, 500, and 1000 µm were, respectively, 0.2075; 0.2070; and 0.3379. Particle size affected interpacking, interfacial bonding, pores number and size, thermal softening, mechanical properties, and friction properties of the brake pad. Comparison between the prepared resin-based and commercial brake pad was also done, confirming the utilization of agro-waste as a potential alternative for friction material in the brake pad.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 135 tautan kepenulisan bersama · 76 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesia University of Education
  • Universitas Djuanda
  • Sampoerna University
  • Sultan Ageng Tirtayasa University
  • Bandung Institute of Technology
  • Taylor's University
  • Universitas Muhammadiyah Magelang
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Risti RagadhitaIndonesia University of Education10
Dwi Fitria Al HusaeniIndonesia University of Education7
Dwi Novia Al HusaeniIndonesia University of Education6
Djati Wibowo DjamariSampoerna University6
Meli FiandiniIndonesia University of Education5
Muji SetiyoUniversitas Muhammadiyah Magelang5
Muhammad Roil BiladUniversiti Brunei Darussalam3
Belkheir HammoutiEuro-Mediterranean University of Fes3
Muhammad AzizThe University of Tokyo3
Siti Pupu FauziahUniversitas Djuanda2
Martin RoestamyUniversitas Djuanda2
Irman SuhermanUniversitas Djuanda2
Tedi KurniawanCommunity College of Qatar2
Obie FarobieIPB University2
Muhamad Rausyan FikriSampoerna University2
Novi NurjanahIndonesia University of Education1
Qurratu Aini Alya AdzkiaIndonesia University of Education1
Riki RustanaIndonesia University of Education1
Selvi Citra CarollineIndonesia University of Education1
Shabrina Maulida AgustineIndonesia University of Education1
Muhammad Rendi RamdhaniUniversitas Djuanda1
Abdul KholikUniversitas Djuanda1
Irianto IriantoUniversitas Jambi1
Tatang HermanIndonesia University of Education1
Didi SuryadiIndonesia University of Education1
I Made SuarsanaUniversitas Pendidikan Ganesha1
Al JupriIndonesia University of Education1
Elah NurlaelahIndonesia University of Education1
Zulkaidah Nur AhzanUniversity of Timor1
Alifia Vidiashtari NabillaIndonesia University of Education1
Alifa Listina DewiIndonesia University of Education1
Anton IrawanSultan Ageng Tirtayasa University1
Teguh KurniawanSultan Ageng Tirtayasa University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Effects of Rice Husk Particles Size as A Reinforcement Component on Resin-Based Brake Pad Performance: From Literature Review on the Use of Agricultural Waste as A Reinforcement Material, Chemical Polymerization Reaction of Epoxy Resin, to Experiments</dc:title>
	<dc:creator xml:lang="en">Nandiyanto, Asep Bayu Dani</dc:creator>
	<dc:creator xml:lang="en">Hofifah, Siti Nur</dc:creator>
	<dc:creator xml:lang="en">Girsang, Gabriela Chelvina Santiuly</dc:creator>
	<dc:creator xml:lang="en">Putri, Silmi Ridwan</dc:creator>
	<dc:creator xml:lang="en">Budiman, Bentang Arief</dc:creator>
	<dc:creator xml:lang="en">Triawan, Farid</dc:creator>
	<dc:creator xml:lang="en">Al-Obaidi, Abdulkareem Sh. Mahdi</dc:creator>
	<dc:subject xml:lang="en">Rice husk</dc:subject>
	<dc:subject xml:lang="en">Brake pad</dc:subject>
	<dc:subject xml:lang="en">Resin</dc:subject>
	<dc:subject xml:lang="en">Epoxy</dc:subject>
	<dc:subject xml:lang="en">Particle size</dc:subject>
	<dc:subject xml:lang="en">Friction</dc:subject>
	<dc:description xml:lang="en">This study aims to investigate the effect of rice husks’ particle size on resin-based brake pad performance (i.e. compressive strength, puncture strength, mass loss, wear rate, friction coefficient, and heat resistance). Bisphenol A-epichlorohydrin and cycloaliphatic amine were mixed to form resin and used as the brake pad's base material. In the experiment, rice husk with a specific particle size (i.e., 250, 500, dan 1000 μm) was added to the resin. Rice husk has received considerable interest due to its lignin, cellulose, and silica content, making it suitable as friction material due to its ceramic-like behavior. The experimental results showed small rice husk particles improved compressive strength, puncture strength, and bulk density. This can be obtained from the analysis of the maximum compressive strength for brake pad supported by particles with sizes of 250, 500, and 1000 μm having values of 0.238; 0.173; and 0.144 MPa, respectively. In contrast, large particles formed coarse surfaces and pores, decreased mass loss rate, and improve friction properties (i.e. wear rate, friction coefficient). The friction coefficient values of brake pad supported by particles with sizes of 250, 500, and 1000 µm were, respectively, 0.2075; 0.2070; and 0.3379. Particle size affected interpacking, interfacial bonding, pores number and size, thermal softening, mechanical properties, and friction properties of the brake pad. Comparison between the prepared resin-based and commercial brake pad was also done, confirming the utilization of agro-waste as a potential alternative for friction material in the brake pad.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2021-05-24</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/4815</dc:identifier>
	<dc:identifier>10.31603/ae.4815</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 4 No. 2 (2021); 68-82</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/4815/2316</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Asep Bayu Dani Nandiyanto, Siti Nur Hofifah, Gabriela Chelvina Santiuly Girsang, Silmi Ridwan Putri, Bentang Arief Budiman, Farid Triawan, Abdulkareem Sh. Mahdi Al-Obaidi</dc:rights>
</oai_dc:dc>