Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Resin-based Brake Pad from Rice Husk Particles: From Literature Review of Brake Pad from Agricultural Waste to the Techno-Economic Analysis

Automotive Experiences · Vol. 4 No. 3 (2021) · hlm. 131–149

DOI
10.31603/ae.5217
ISSN
2615-6636, 2615-6202
Terbit
2021-08-16
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

A brake pad is the most crucial component in motorized vehicles. Many ways have been done and reported on how to prepare resin-based brake pads, but information relating to the economic analysis of resin-based brake pads on a large-scale production is still rare. This study aimed to report a literature review of brake pad production from biomass and agricultural wastes, optimal design of brake pad, and techno-economic analysis of resin-based brake pad production from rice husk. In the techno-economic analysis, we focused on engineering and economic perspectives. Engineering analysis was conducted by calculating the mass balance in the resin-brake pad production process. To support the analysis, economic parameters including gross profit margin (GPM), payback period (PBP), break-even point (BEP), cumulative net present value (CNPV), profitability index (PI), internal rate return (IRR), and return on investment (ROI) were calculated to predict the feasibility of project under ideal condition. We also calculated the techno-economic analysis for the worst cases in the project, calculating the internal problems (i.e., raw materials, sales, utility, labor, employee, fixed cost, variable cost, and production capacity) and the external issues (i.e., taxes and subsidiaries). Based on the engineering evaluation, the resin-based brake pad project is prospective. From economic evaluation, GPM, PBP, BEP, CNPV, PI, and ROI showed positive results, indicating that the project is potential for the large-scale production. This work has demonstrated the importance of the projects for further development and can be used as a reference for further production of brake pads made from agricultural waste.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 129 tautan kepenulisan bersama · 65 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesia University of Education
  • Universitas Djuanda
  • Sunan Gunung Djati State Islamic University Bandung
  • Community College of Qatar
  • Taylor's University
  • Universitas Muhammadiyah Magelang
  • Universiti Brunei Darussalam
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dwi Novia Al HusaeniIndonesia University of Education12
Abdulkareem Sh. Mahdi Al‐ObaidiTaylor's University8
Meli FiandiniIndonesia University of Education8
Muhammad Roil BiladUniversiti Brunei Darussalam6
Muji SetiyoUniversitas Muhammadiyah Magelang5
Gabriela Chelvina Santiuly GirsangIndonesia University of Education3
Belkheir HammoutiEuro-Mediterranean University of Fes3
Obie FarobieIPB University3
Erna PiantariIndonesia University of Education3
Siti Pupu FauziahUniversitas Djuanda2
Martin RoestamyUniversitas Djuanda2
Irman SuhermanUniversitas Djuanda2
Farid TriawanSampoerna University2
Siti Nur HofifahIndonesia University of Education2
Agus SolehudinIndonesia University of Education2
Haipan SalamIndonesia University of Education2
Dian NursantikaIndonesia Open University1
Mushfani Ainul UrwahIndonesia University of Education1
Novi NurjanahIndonesia University of Education1
Qurratu Aini Alya AdzkiaIndonesia University of Education1
Riki RustanaIndonesia University of Education1
Selvi Citra CarollineIndonesia University of Education1
Shabrina Maulida AgustineIndonesia University of Education1
Muhammad Rendi RamdhaniUniversitas Djuanda1
Abdul KholikUniversitas Djuanda1
Irianto IriantoUniversitas Jambi1
Tatang HermanIndonesia University of Education1
Didi SuryadiIndonesia University of Education1
I Made SuarsanaUniversitas Pendidikan Ganesha1
Al JupriIndonesia University of Education1
Elah NurlaelahIndonesia University of Education1
Zulkaidah Nur AhzanUniversity of Timor1
Nurul FirdausSunan Gunung Djati State Islamic University Bandung1
Asep HerdiSunan Gunung Djati State Islamic University Bandung1
Asep Andi RahmanSunan Gunung Djati State Islamic University Bandung1
Alifia Vidiashtari NabillaIndonesia University of Education1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Resin-based Brake Pad from Rice Husk Particles: From Literature Review of Brake Pad from Agricultural Waste to the Techno-Economic Analysis</dc:title>
	<dc:creator xml:lang="en">Nandiyanto, Asep Bayu Dani</dc:creator>
	<dc:creator xml:lang="en">Husaeni, Dwi Fitria Al</dc:creator>
	<dc:creator xml:lang="en">Ragadhita, Risti</dc:creator>
	<dc:creator xml:lang="en">Kurniawan, Tedi</dc:creator>
	<dc:subject xml:lang="en">Engineering perspective</dc:subject>
	<dc:subject xml:lang="en">Feasibility study</dc:subject>
	<dc:subject xml:lang="en">Resin-based brake pad</dc:subject>
	<dc:subject xml:lang="en">Techno-economic analysis</dc:subject>
	<dc:description xml:lang="en">A brake pad is the most crucial component in motorized vehicles. Many ways have been done and reported on how to prepare resin-based brake pads, but information relating to the economic analysis of resin-based brake pads on a large-scale production is still rare. This study aimed to report a literature review of brake pad production from biomass and agricultural wastes, optimal design of brake pad, and techno-economic analysis of resin-based brake pad production from rice husk. In the techno-economic analysis, we focused on engineering and economic perspectives. Engineering analysis was conducted by calculating the mass balance in the resin-brake pad production process. To support the analysis, economic parameters including gross profit margin (GPM), payback period (PBP), break-even point (BEP), cumulative net present value (CNPV), profitability index (PI), internal rate return (IRR), and return on investment (ROI) were calculated to predict the feasibility of project under ideal condition. We also calculated the techno-economic analysis for the worst cases in the project, calculating the internal problems (i.e., raw materials, sales, utility, labor, employee, fixed cost, variable cost, and production capacity) and the external issues (i.e., taxes and subsidiaries). Based on the engineering evaluation, the resin-based brake pad project is prospective. From economic evaluation, GPM, PBP, BEP, CNPV, PI, and ROI showed positive results, indicating that the project is potential for the large-scale production. This work has demonstrated the importance of the projects for further development and can be used as a reference for further production of brake pads made from agricultural waste.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2021-08-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/5217</dc:identifier>
	<dc:identifier>10.31603/ae.5217</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 4 No. 3 (2021); 131-149</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/5217/2639</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Asep Bayu Dani Nandiyanto, Dwi Fitria Al Hussaeni, Risti Ragadhita, Tedi Kurniawan</dc:rights>
</oai_dc:dc>