Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effect of Surface Hardening on The HQ 705 Steel Camshaft Using Static Induction Hardening and Tempering Method

Automotive Experiences · Vol. 5 No. 3 (2022) · hlm. 343–354

DOI
10.31603/ae.7029
ISSN
2615-6636, 2615-6202
Terbit
2022-06-12
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Induction hardening (IH) is a popular choice for automotive components such as camshafts for its ability to harden portions of a component selectively. The camshaft will contact the tappet, connected to the rocker arm, to open and close the valve whenever the engine is running. This contact between the camshaft and the tappet causes wear on the camshaft surface. IH of the camshaft is required to improve wear resistance and service life, as well as core elasticity to absorb high torsional stresses. It is known that studies about IH on camshafts are still very limited. This study aims to determine the effect of the induction hardening and tempering treatment on the mechanical properties of the camshaft made of HQ 705 steel. The induction hardening carried out in this study uses different parameter settings such as heating time and output current. The camshaft specimen is hardened by static induction and then quenched in oil. The specimens are tempered after induction hardening with different temperatures and holding times to adjust the hardness level and reduce brittleness. Hardness, macro photographs, micrograph, and wear tests were conducted to determine the mechanical properties of the camshaft specimen after the induction hardening and tempering process. This study indicates that induction hardening with an output current of 747 A for 15 seconds followed by tempering at 150 °C for 15 seconds on specimen 1 produced the best mechanical properties. On the surface of these specimens found more martensite content while there was no microstructural change on the inside. The surface hardness of these specimens is 44 HRC (Rockwell C Hardness), while the inside is 26 HRC. Meanwhile, specific wear decreased by 45.45%.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 148 tautan kepenulisan bersama · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Stikubank
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Al Ichlas ImranAfiliasi tidak diketahui12
Jamiluddin JaafarAfiliasi tidak diketahui9
Samsudin AnisAfiliasi tidak diketahui8
Agustinus Purna IrawanAfiliasi tidak diketahui7
Muji SetiyoAfiliasi tidak diketahui7
Rozanna DewiAfiliasi tidak diketahui6
Mohd Ruzaimi Mat RejabAfiliasi tidak diketahui6
Agung Efriyo HadiAfiliasi tidak diketahui6
Athanasius Priharyoto BayusenoAfiliasi tidak diketahui5
Yusuf SubagyoAfiliasi tidak diketahui4
Baharudin PriwintokoAfiliasi tidak diketahui4
Janviter ManaluAfiliasi tidak diketahui3
Achmad Erlangga Bintang SamodraAfiliasi tidak diketahui3
WahyudiAfiliasi tidak diketahui2
SukarniAfiliasi tidak diketahui2
Sonika MaulanaAfiliasi tidak diketahui2
Mochammad AriyantoAfiliasi tidak diketahui2
Agus PrasetyoUniversitas Stikubank2
Risky IsmailAfiliasi tidak diketahui2
A. P. BayusenoAfiliasi tidak diketahui2
Muhammad AfrizalAfiliasi tidak diketahui2
Abram Puspa PramuditaAfiliasi tidak diketahui1
Sonika Maulana HalimAfiliasi tidak diketahui1
Muhammad Ziddun Ni’amAfiliasi tidak diketahui1
Wirawan SumbodoAfiliasi tidak diketahui1
Rizqi Fitri NaryantoAfiliasi tidak diketahui1
Kuat NursiamAfiliasi tidak diketahui1
Adhi KusumastutiAfiliasi tidak diketahui1
Bagas Satria Adjie PratamaAfiliasi tidak diketahui1
Indra Nurul HidayatAfiliasi tidak diketahui1
Kriswanto KriswantoAfiliasi tidak diketahui1
Rusiyanto RusiyantoAfiliasi tidak diketahui1
Muttaqin HaqiqiAfiliasi tidak diketahui1
Athallahariq Fadhil Kamal PutraAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Effect of Surface Hardening on The HQ 705 Steel Camshaft Using Static Induction Hardening and Tempering Method</dc:title>
	<dc:creator xml:lang="en">Nugroho, Sri</dc:creator>
	<dc:creator xml:lang="en">Fitriyana, Deni Fajar</dc:creator>
	<dc:creator xml:lang="en">Ismail, Rifky</dc:creator>
	<dc:creator xml:lang="en">Nurcholis, Thesar Aditya</dc:creator>
	<dc:creator xml:lang="en">Cionita, Tezara</dc:creator>
	<dc:creator xml:lang="en">Siregar, Januar Parlaungan</dc:creator>
	<dc:subject xml:lang="en">Surface hardening</dc:subject>
	<dc:subject xml:lang="en">Camshaft</dc:subject>
	<dc:subject xml:lang="en">Induction</dc:subject>
	<dc:subject xml:lang="en">Quenching</dc:subject>
	<dc:subject xml:lang="en">Tempering</dc:subject>
	<dc:description xml:lang="en">Induction hardening (IH) is a popular choice for automotive components such as camshafts for its ability to harden portions of a component selectively. The camshaft will contact the tappet, connected to the rocker arm, to open and close the valve whenever the engine is running. This contact between the camshaft and the tappet causes wear on the camshaft surface. IH of the camshaft is required to improve wear resistance and service life, as well as core elasticity to absorb high torsional stresses. It is known that studies about IH on camshafts are still very limited. This study aims to determine the effect of the induction hardening and tempering treatment on the mechanical properties of the camshaft made of HQ 705 steel. The induction hardening carried out in this study uses different parameter settings such as heating time and output current. The camshaft specimen is hardened by static induction and then quenched in oil. The specimens are tempered after induction hardening with different temperatures and holding times to adjust the hardness level and reduce brittleness. Hardness, macro photographs, micrograph, and wear tests were conducted to determine the mechanical properties of the camshaft specimen after the induction hardening and tempering process. This study indicates that induction hardening with an output current of 747 A for 15 seconds followed by tempering at 150 °C for 15 seconds on specimen 1 produced the best mechanical properties. On the surface of these specimens found more martensite content while there was no microstructural change on the inside. The surface hardness of these specimens is 44 HRC (Rockwell C Hardness), while the inside is 26 HRC. Meanwhile, specific wear decreased by 45.45%.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2022-06-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/7029</dc:identifier>
	<dc:identifier>10.31603/ae.7029</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 5 No. 3 (2022); 343-354</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/7029/3364</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 Sri Nugroho, Deni Fajar Fitriyana, Rifky Ismail, Thesar Aditya Nurcholis, Tezara Cionita, Januar Parlaungan Siregar</dc:rights>
</oai_dc:dc>