Investigation of Brake Pad Wear Effect due to Temperature Generation Influenced by Brake Stepping Count on Different Road Terrains

Majuma, Rusli; Peeie, Mohamad Heerwan Bin; Ondong, Kerisvin; Hassan, Othman Abu

doi:10.31603/ae.8869

Jurnal SINTA 1

Investigation of Brake Pad Wear Effect due to Temperature Generation Influenced by Brake Stepping Count on Different Road Terrains

Automotive Experiences · Vol. 6 No. 2 (2023) · hlm. 234–244

DOI: 10.31603/ae.8869
ISSN: 2615-6636, 2615-6202
Terbit: 2023-05-18
Penerbit: Universitas Muhammadiyah Magelang
Bahasa: en

Abstrak

The use of vehicles in Malaysia has become a need and important to commute to the workplace and commercial business transportation. This necessity resulted in an increase in the number of cars on the road that eventually increase the number of accidents that resulted in the loss of life which is also one of the leading killers in Malaysia. Deriving from this phenomenon, car maintenance especially brake systems has become imperative that eventually become the main objective of this research to investigate the effect of different road terrains to brake pad wear. The experimental vehicle is operated in two different road terrains namely hilly and flat roads and each road terrain is set to complete 1000km of investigation traveled distance. Three main investigation parameters are brake pad thickness wear, the temperature generated from rubbing the brake pad with the rotor, and the brake force applied on the brake pedal. A CANedge external onboard diagnostic (OBD) logger is used to collect real-time data on the relevant parameters from the vehicle’s ECU for analysis. The result from the experiments found that the average brake pad wear rate during hilly roads is 53% higher than that of flat roads. Likewise, brake pad temperature generation on a hilly road is 34% higher than that on a flat road. However, the brake pedal force applied during braking is 60% higher on flat roads compared to on hilly roads. From the findings, data from the vehicle OBD2 and the brake pad wear can be analyzed to provide an electronic signal for indication of timely maintenance for the brake pad.

Kata kunci

Jaringan kolaborasi para penulis

14 penulis · 45 tautan kepenulisan bersama · 11 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

Universiti Malaysia Pahang Al-Sultan Abdullah
Institut Penyelidikan Keselamatan Jalan Raya Malaysia
Universitas Muhammadiyah Magelang
Pancasila University

Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel

Tampilkan sebagai tabel

Rekan penulis	Organisasi	Artikel bersama
Abdullah Zulkifli	Universiti Malaysia Pahang Al-Sultan Abdullah	2
Muhammad Izhar Ishak	Universiti Malaysia Pahang Al-Sultan Abdullah	2
Zulhaidi Mohd Jawi	Institut Penyelidikan Keselamatan Jalan Raya Malaysia	1
Ericsson Yong	Universiti Malaysia Pahang Al-Sultan Abdullah	1
Mohd Zamri Ibrahim	Universiti Malaysia Pahang Al-Sultan Abdullah	1
Muhammad Aizzat Zakaria	Universiti Malaysia Pahang Al-Sultan Abdullah	1
Intan Suhana Mohd Razelan	Universiti Malaysia Pahang Al-Sultan Abdullah	1
Ahmad Fakhri Ab. Nasir	Universiti Malaysia Pahang Al-Sultan Abdullah	1
Muji Setiyo	Universitas Muhammadiyah Magelang	1
Indra Chandra Setiawan	Pancasila University	1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.

Metadata asli (oai_dc)

<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Investigation of Brake Pad Wear Effect due to Temperature Generation Influenced by Brake Stepping Count on Different Road Terrains</dc:title>
	<dc:creator xml:lang="en">Majuma, Rusli</dc:creator>
	<dc:creator xml:lang="en">Peeie, Mohamad Heerwan Bin</dc:creator>
	<dc:creator xml:lang="en">Ondong, Kerisvin</dc:creator>
	<dc:creator xml:lang="en">Hassan, Othman Abu</dc:creator>
	<dc:subject xml:lang="en">Brake pad thickness</dc:subject>
	<dc:subject xml:lang="en">Brake pedal force</dc:subject>
	<dc:subject xml:lang="en">Temperature generation</dc:subject>
	<dc:subject xml:lang="en">Vehicle monitoring system</dc:subject>
	<dc:subject xml:lang="en">Vehicle maintenance</dc:subject>
	<dc:description xml:lang="en">The use of vehicles in Malaysia has become a need and important to commute to the workplace and commercial business transportation. This necessity resulted in an increase in the number of cars on the road that eventually increase the number of accidents that resulted in the loss of life which is also one of the leading killers in Malaysia. Deriving from this phenomenon, car maintenance especially brake systems has become imperative that eventually become the main objective of this research to investigate the effect of different road terrains to brake pad wear. The experimental vehicle is operated in two different road terrains namely hilly and flat roads and each road terrain is set to complete 1000km of investigation traveled distance. Three main investigation parameters are brake pad thickness wear, the temperature generated from rubbing the brake pad with the rotor, and the brake force applied on the brake pedal. A CANedge external onboard diagnostic (OBD) logger is used to collect real-time data on the relevant parameters from the vehicle’s ECU for analysis. The result from the experiments found that the average brake pad wear rate during hilly roads is 53% higher than that of flat roads. Likewise, brake pad temperature generation on a hilly road is 34% higher than that on a flat road. However, the brake pedal force applied during braking is 60% higher on flat roads compared to on hilly roads. From the findings, data from the vehicle OBD2 and the brake pad wear can be analyzed to provide an electronic signal for indication of timely maintenance for the brake pad.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2023-05-18</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/8869</dc:identifier>
	<dc:identifier>10.31603/ae.8869</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 6 No. 2 (2023); 234-244</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/8869/4213</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Rusli Majuma, Mohamad Heerwan bin Peeie, Kerisvin Kerisvin Ondong, Othman Abu Hassan</dc:rights>
</oai_dc:dc>