Melola Discovery

← Melola Discovery

Jurnal SINTA 1

A Study on Characteristics of Brake Pad Composite Materials by Varying the Composition of Epoxy, Rice Husk, Al2O3, and Fe2O3

Automotive Experiences · Vol. 6 No. 2 (2023) · hlm. 303–319

DOI
10.31603/ae.9121
ISSN
2615-6636, 2615-6202
Terbit
2023-08-27
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

The use of composite materials in brake pads is becoming increasingly popular due to their high-performance characteristics, including good thermal stability, high wear resistance, and low noise generation. However, the development of new composite materials that offer even better performance is still an ongoing research area. In this study, the composite was made by hand layup method using epoxy resin as matrix material, with rice husk, Al2O3, and Fe2O3 as reinforcing materials. The composition of the composites was varied by changing the percentage of the reinforcement materials. The composites were then subjected to several characterization tests, including density, hardness, flexural strength, thermal analysis, Scanning Electron Microscopy (SEM), TGA/DSC, and wear testing. The test results showed that additional reinforcement materials to the epoxy resin matrix improved the mechanical properties of the composites. Overall, the study demonstrates that a hand layup method is a viable approach for preparing brake pad composite materials and that the addition of rice husk, Al2O3, and Fe2O3 can improve the mechanical properties of the composites. The best properties produced in this research were found in one of the specimens which used epoxy, rice husk, Al2O3, and Fe2O3 with a composition of 50 wt.%, 20 wt.%, 15 wt.%, and 15 wt.%. However, the addition of rice husk also provides wear resistance and thermal stability. This study contributes to the Sustainable Development Goals (SDGs) by advancing innovation, promoting sustainability, and reducing emissions in automotive industry applications.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 170 tautan kepenulisan bersama · 113 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Diponegoro University
  • Islamic University of Indonesia
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Tarumanagara University
  • INTI International University
  • Universiti Teknikal Malaysia Melaka
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Al Ichlas ImranUniversitas Halu Oleo12
Athanasius Priharyoto BayusenoDiponegoro University11
Jamiluddin JaafarTun Hussein Onn University of Malaysia10
Samsudin AnisState University of Semarang8
Muji SetiyoUniversitas Muhammadiyah Magelang7
Rozanna DewiMalikussaleh University6
M. R. M. RejabUniversiti Malaysia Pahang Al-Sultan Abdullah6
Agung Efriyo HadiUniversitas Malahayati6
J. JamariDiponegoro University5
KriswantoAfiliasi tidak diketahui3
Rusiyanto RusiyantoState University of Semarang3
Febri Budi DarsonoState University of Semarang2
KriswantoState University of Semarang2
SukarniState University of Malang2
Sonika MaulanaState University of Semarang2
Yusuf SubagyoDiponegoro University2
Baharudin PriwintokoDiponegoro University2
Rifky IsmailDiponegoro University2
Agus PrasetyoDiponegoro University2
Risky IsmailAfiliasi tidak diketahui2
Kriswanto KriswantoState University of Semarang2
Sukma AninditaIslamic University of Indonesia1
Fadhil Putra RamadhanState University of Semarang1
Kaleb PriyantoState University of Semarang1
Khoirul HudaState University of Semarang1
Rachael AndikaState University of Semarang1
Septian Eko CahyantoState University of Semarang1
Andrean Rachman RizaldyState University of Semarang1
Beni Aji SubektiState University of Semarang1
Muhammad Iqbal RamadhaniState University of Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">A Study on Characteristics of Brake Pad Composite Materials by Varying the Composition of Epoxy, Rice Husk, Al2O3, and Fe2O3</dc:title>
	<dc:creator xml:lang="en">Khafidh, Muhammad</dc:creator>
	<dc:creator xml:lang="en">Putera, Finny Pratama</dc:creator>
	<dc:creator xml:lang="en">Yotenka, Rahmadi</dc:creator>
	<dc:creator xml:lang="en">Fitriyana, Deni Fajar</dc:creator>
	<dc:creator xml:lang="en">Widodo, Rahmat Doni</dc:creator>
	<dc:creator xml:lang="en">Ismail, Rifky</dc:creator>
	<dc:creator xml:lang="en">Irawan, Agustinus Purna</dc:creator>
	<dc:creator xml:lang="en">Cionita, Tezara</dc:creator>
	<dc:creator xml:lang="en">Siregar, Januar Parlaungan</dc:creator>
	<dc:creator xml:lang="en">Ismail, Nur Hidayah</dc:creator>
	<dc:subject xml:lang="en">Composites</dc:subject>
	<dc:subject xml:lang="en">Brake pad</dc:subject>
	<dc:subject xml:lang="en">Epoxy</dc:subject>
	<dc:subject xml:lang="en">Rice husk</dc:subject>
	<dc:subject xml:lang="en">Al2O3</dc:subject>
	<dc:subject xml:lang="en">Fe2O3</dc:subject>
	<dc:description xml:lang="en">The use of composite materials in brake pads is becoming increasingly popular due to their high-performance characteristics, including good thermal stability, high wear resistance, and low noise generation. However, the development of new composite materials that offer even better performance is still an ongoing research area. In this study, the composite was made by hand layup method using epoxy resin as matrix material, with rice husk, Al2O3, and Fe2O3 as reinforcing materials. The composition of the composites was varied by changing the percentage of the reinforcement materials. The composites were then subjected to several characterization tests, including density, hardness, flexural strength, thermal analysis, Scanning Electron Microscopy (SEM), TGA/DSC, and wear testing. The test results showed that additional reinforcement materials to the epoxy resin matrix improved the mechanical properties of the composites. Overall, the study demonstrates that a hand layup method is a viable approach for preparing brake pad composite materials and that the addition of rice husk, Al2O3, and Fe2O3 can improve the mechanical properties of the composites. The best properties produced in this research were found in one of the specimens which used epoxy, rice husk, Al2O3, and Fe2O3 with a composition of 50 wt.%, 20 wt.%, 15 wt.%, and 15 wt.%. However, the addition of rice husk also provides wear resistance and thermal stability. This study contributes to the Sustainable Development Goals (SDGs) by advancing innovation, promoting sustainability, and reducing emissions in automotive industry applications.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2023-08-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/9121</dc:identifier>
	<dc:identifier>10.31603/ae.9121</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 6 No. 2 (2023); 303-319</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/9121/4495</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Muhammad Khafidh, Finny Pratama Putera, Rahmadi Yotenka, Deni Fajar Fitriyana, Rahmat Doni Widodo, Rifky Ismail, Agustinus Purna Irawan, Tezara Cionita, Januar Parlaungan Siregar, Nur Hidayah Ismail</dc:rights>
</oai_dc:dc>