Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Coil Spring Failure Analysis Reviewed from Residual Stress, Crytal Orientation, and Texture

Automotive Experiences · Vol. 6 No. 3 (2023) · hlm. 515–527

DOI
10.31603/ae.9803
ISSN
2615-6636, 2615-6202
Terbit
2023-11-24
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Crystal defects can be identified through the crystallographic characteristics of crystal orientation (lattice), microstrain, and texture. Identification of crystal defects on the atomic scale through crystallography is very important in analyzing the mechanism of material properties due to the influence of dislocations. The slip mechanism is analyzed to minimize coil spring failure. This study aims to analyze the causes of coil spring failure based on crystallography. XRD testing was carried out for analysis of residual stress, crystal orientation, and texture using MAUD 2.94 version software. Hardness testing was carried out on the surface of the coil spring with locations near and far from the fracture using micro Vickers. The macro fracture morphology was analyzed using a DSLR camera and the micro fracture morphology was analyzed using SEM. The XRD result shows that the coil spring material has a tensile residual stress value of "202.4 ± 15.9 MPa" with the resulting crystal orientation showing the hkl (100), (200), (211), (200) fields. The plane (200) has a texture characteristic that is oriented towards the Rolling direction along the spring axis. Texture oriented towards Rolling Direction can be shown with a maximum probability value of 1.191. A high probability will have an impact on the presence of material surface defects. Surface defects are indicated by the presence of pit corrosion on micro and macro fracture morphology observations. The pit corrosion defects that occur in the failed coil springs are the beginning of the formation of crack initiation and cause stress concentration. The stress concentration will increase with loading and cause crack propagation.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 147 tautan kepenulisan bersama · 70 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Malang
  • National Research and Innovation Agency
  • University of Brawijaya
  • Pelita Harapan University
  • University of Indonesia
  • National Nuclear Energy Agency of Indonesia
  • Kementerian Pemuda dan Olahraga Republik Indonesia
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Riduwan PrasetyaState University of Malang3
Muhammad Faizullah PashaState University of Malang2
Muhammad Wahid DarmawanState University of Malang2
Uun YanuharUniversity of Brawijaya2
Aminnudin AminnudinState University of Malang2
Agung ImaduddinNational Research and Innovation Agency1
Dicky Rezky MunazatNational Research and Innovation Agency1
Rina KamilaNational Research and Innovation Agency1
Budhy KurniawanUniversity of Indonesia1
Wisnu Ari AdiNational Nuclear Energy Agency of Indonesia1
Yohanes Edi GunantoPelita Harapan University1
Maya Puspitasari IzaakPelita Harapan University1
Henni SitompulPelita Harapan University1
Yunasfi YunasfiNational Research and Innovation Agency1
Muhamad Rizky AkbarState University of Malang1
Poppy PuspitasariState University of Malang1
Imam Muda NauriState University of Malang1
Syafira Bilqis KhoyrohState University of Malang1
Margono MargonoKementerian Pemuda dan Olahraga Republik Indonesia1
Muhammad KozinNational Research and Innovation Agency1
Djarot Bangun DarmadiUniversity of Brawijaya1
Teguh Dwi WidodoUniversity of Brawijaya1
Prabowo PurantoNational Research and Innovation Agency1
M.P. KamilNational Research and Innovation Agency1
Diah Ayu FitrianiNational Research and Innovation Agency1
Siti Amalina AzahraNational Research and Innovation Agency1
Wiwien AndriyantiNational Research and Innovation Agency1
Anni FaridahUniversitas Negeri Padang1
Daimon SyukriAndalas University1
Joseph Selvi BinojSaveetha University1
Fajar NusantaraState University of Malang1
Ulfieda Anwar UlhaqState University of Malang1
Komarudin KomarudinState University of Malang1
Fina Nur NabillahState University of Malang1
Mohammad Sukri MustapaTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Coil Spring Failure Analysis Reviewed from Residual Stress, Crytal Orientation, and Texture</dc:title>
	<dc:creator xml:lang="en">Andoko, Andoko</dc:creator>
	<dc:creator xml:lang="en">Ananto, Rifqi Ryandi Dwi</dc:creator>
	<dc:creator xml:lang="en">Suryanto, Heru</dc:creator>
	<dc:creator xml:lang="en">Gapsari, Femiana</dc:creator>
	<dc:creator xml:lang="en">Manawan, Maykel</dc:creator>
	<dc:subject xml:lang="en">Coil spring</dc:subject>
	<dc:subject xml:lang="en">Crystal orientation</dc:subject>
	<dc:subject xml:lang="en">Failure analysis</dc:subject>
	<dc:subject xml:lang="en">Residual stress</dc:subject>
	<dc:subject xml:lang="en">Texture</dc:subject>
	<dc:description xml:lang="en">Crystal defects can be identified through the crystallographic characteristics of crystal orientation (lattice), microstrain, and texture. Identification of crystal defects on the atomic scale through crystallography is very important in analyzing the mechanism of material properties due to the influence of dislocations. The slip mechanism is analyzed to minimize coil spring failure. This study aims to analyze the causes of coil spring failure based on crystallography. XRD testing was carried out for analysis of residual stress, crystal orientation, and texture using MAUD 2.94 version software. Hardness testing was carried out on the surface of the coil spring with locations near and far from the fracture using micro Vickers. The macro fracture morphology was analyzed using a DSLR camera and the micro fracture morphology was analyzed using SEM. The XRD result shows that the coil spring material has a tensile residual stress value of "202.4 ± 15.9 MPa" with the resulting crystal orientation showing the hkl (100), (200), (211), (200) fields. The plane (200) has a texture characteristic that is oriented towards the Rolling direction along the spring axis. Texture oriented towards Rolling Direction can be shown with a maximum probability value of 1.191. A high probability will have an impact on the presence of material surface defects. Surface defects are indicated by the presence of pit corrosion on micro and macro fracture morphology observations. The pit corrosion defects that occur in the failed coil springs are the beginning of the formation of crack initiation and cause stress concentration. The stress concentration will increase with loading and cause crack propagation.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2023-11-24</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/9803</dc:identifier>
	<dc:identifier>10.31603/ae.9803</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 6 No. 3 (2023); 515-527</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/9803/4713</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Andoko Andoko, Rifqi Ryandi Dwi Ananto, Heru Suryanto, Femiana Gapsari, Maykel Manawan</dc:rights>
</oai_dc:dc>