Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Static Structural Analysis of Checking Fixture Frame of Car Interior Using Finite Element Method

Automotive Experiences · Vol. 6 No. 3 (2023) · hlm. 652–668

DOI
10.31603/ae.9860
ISSN
2615-6636, 2615-6202
Terbit
2023-12-28
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

An inspection is the most important step for the manufacturers producing their cars. This ensures the seamless compatibility of each car part, as even minor errors can lead to user discomfort during operation. To achieve that goal, the utilization of inspection tools, such as a checking fixture is essential. In this research, we will study the structure analysis of a checking fixture with Ansys software. This study aims to examine the structural strength by analyzing the impact of various design variations on the overall strength outcomes. The requirement for checking fixture is that it must meet the datum tolerance of the car with value of ± 2mm. Due to that factor, a rigid checking fixture is needed for inspecting the part without experiencing significant deformation. In static loading, the result of the first variation frame has a stress of 5.71 MPa and deformation of 0.051 mm, the second variation frame has a stress of 6.16 MPa and deformation of 0.049 mm and the third variation frame has a stress of 5.63 MPa and deformation 0.042 mm. In terms of weight, the first variation structure has 2470.48 kg, the second variation structure has 2179.93 kg and the third variation structure has 2210 kg. The second variation frame has the highest stress but it has the lightest weight, and the third variation frame has lower stress and deformation but it has a heavier weight than the second variation model. The study results that the second variation model is superior because it has the lightest weight while the three designs have small stress and deformation that still satisfy the requirement of the fixture.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 144 tautan kepenulisan bersama · 67 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • Bandung Institute of Technology
  • Universitas Widya Gama Malang
  • State University of Malang
  • Padjadjaran University
  • Islamic University of Madinah
  • Korea Marine Equipment Research Institute
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Fitrian ImaduddinIslamic University of Madinah4
Rahmad Rizki Nur ArifinUniversiti Teknologi Petronas3
Irfan BahiuddinUniversitas Gadjah Mada3
Kacuk Cikal NugrohoAkademi Inovasi Indonesia3
Saiful Amri MazlanUniversity of Technology Malaysia3
Gigih PriyandokoUniversitas Widya Gama Malang2
Purbo SuwandonoUniversitas Widya Gama Malang2
Muhammad Ilman Nur SasongkoState University of Malang2
Zainal ArifinSebelas Maret University2
Dominicus Danardono Dwi Prija TjahjanaSebelas Maret University2
Muhammad NizamSebelas Maret University2
Winarendra Satya RajasaBandung Institute of Technology1
Agus SamsiBandung Institute of Technology1
Seung Jun BaekKorea Marine Equipment Research Institute1
Dhanies Wahyu ArdyrizkySebelas Maret University1
Quang Thang DoNha Trang University1
Suyitno SuyitnoSebelas Maret University1
Wibawa Endra JuwanaSebelas Maret University1
Rendy Adhi RachmantoSebelas Maret University1
Chico Hermanu BrilliantoSebelas Maret University1
Singgih Dwi PrasetyoState University of Malang1
Arinal Falah MuhammadSebelas Maret University1
Mohd Afzanizam Mohd RosliAfiliasi tidak diketahui1
Inayati InayatiSebelas Maret University1
Mufti Reza Aulia PutraSebelas Maret University1
Oki MurazaPertamina (Indonesia)1
Budi SantosoSebelas Maret University1
Agus SartomoSebelas Maret University1
Elliza Tri MaharaniKongju National University1
Eki RoviantoSebelas Maret University1
Khairunnisa KhairunnisaYogyakarta State University1
Muhammad Faris FardanSebelas Maret University1
Catur HarsitoSebelas Maret University1
Ari PrasetyoSebelas Maret University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Static Structural Analysis of Checking Fixture Frame of Car Interior Using Finite Element Method</dc:title>
	<dc:creator xml:lang="en">Hanandita, Hanif Setya</dc:creator>
	<dc:creator xml:lang="en">Ubaidillah, Ubaidillah</dc:creator>
	<dc:creator xml:lang="en">Prabowo, Aditya Rio</dc:creator>
	<dc:creator xml:lang="en">Lenggana, Bhre Wangsa</dc:creator>
	<dc:creator xml:lang="en">Turnip, Arjon</dc:creator>
	<dc:creator xml:lang="en">Joelianto, Endra</dc:creator>
	<dc:subject xml:lang="en">Static analysis</dc:subject>
	<dc:subject xml:lang="en">FEM</dc:subject>
	<dc:subject xml:lang="en">FEA</dc:subject>
	<dc:subject xml:lang="en">Checking fixture</dc:subject>
	<dc:subject xml:lang="en">Finite element</dc:subject>
	<dc:description xml:lang="en">An inspection is the most important step for the manufacturers producing their cars. This ensures the seamless compatibility of each car part, as even minor errors can lead to user discomfort during operation. To achieve that goal, the utilization of inspection tools, such as a checking fixture is essential. In this research, we will study the structure analysis of a checking fixture with Ansys software. This study aims to examine the structural strength by analyzing the impact of various design variations on the overall strength outcomes. The requirement for checking fixture is that it must meet the datum tolerance of the car with value of ± 2mm. Due to that factor, a rigid checking fixture is needed for inspecting the part without experiencing significant deformation. In static loading, the result of the first variation frame has a stress of 5.71 MPa and deformation of 0.051 mm, the second variation frame has a stress of 6.16 MPa and deformation of 0.049 mm and the third variation frame has a stress of 5.63 MPa and deformation 0.042 mm. In terms of weight, the first variation structure has 2470.48 kg, the second variation structure has 2179.93 kg and the third variation structure has 2210 kg. The second variation frame has the highest stress but it has the lightest weight, and the third variation frame has lower stress and deformation but it has a heavier weight than the second variation model. The study results that the second variation model is superior because it has the lightest weight while the three designs have small stress and deformation that still satisfy the requirement of the fixture.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2023-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/9860</dc:identifier>
	<dc:identifier>10.31603/ae.9860</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 6 No. 3 (2023); 652-668</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/9860/4750</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Hanif Setya Hanandita, Ubaidillah Ubaidillah, Aditya Rio Prabowo, Bhre Wangsa Lenggana, Arjon Turnip, Endra Joelianto</dc:rights>
</oai_dc:dc>