Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Performance of Transition Metal Supported Al2O3 Coated on Honeycomb Catalysts and Its Segmentation on Exhaust Gasses Oxidation

Automotive Experiences · Vol. 7 No. 1 (2024) · hlm. 86–96

DOI
10.31603/ae.10686
ISSN
2615-6636, 2615-6202
Terbit
2024-04-27
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

The oxidation of carbon monoxide (CO) and unburnt hydrocarbons (HC) under segmented honeycomb catalysts was investigated using actual exhaust gas mixtures from a gasoline-fueled internal combustion engine of a motorcycle. The honeycomb catalysts were prepared through a wet process, resulting in four types coated with transition metals (Cu, Cr, Fe, and Ni) supported on Al2O3. The oxidation of CO and HC was monitored using an exhaust gas analyzer across a range of air-to-fuel ratios (AFR), from lean to rich, under stationary conditions. The results demonstrate that the honeycomb catalysts effectively decreased CO and HC concentrations in the exhaust gas. Among the transition metal oxide honeycomb catalysts, Cr and Ni exhibited high CO and HC conversion rates, surpassing those observed with Cu. The average CO and HC conversion calculations, spanning from lean to rich air-to-fuel ratios, were consistent with the actual conversion rates achieved. Furthermore, the study investigated the effect of honeycomb segmentation on CO and HC conversion. Surprisingly, the catalytic performance of Cr and Ni remained high even with longer gaps in the honeycomb. Interestingly, the conversion of CO and HC over the iron oxide honeycomb catalyst increased as the gap in the honeycomb became longer. This is likely due to an increase in the gap size and enhanced re-mixing of reactants (CO, HC, and O2) caused by recirculation. Thus, this study provides valuable elucidation on the potential application of segmented honeycomb catalysts for reducing CO and HC emissions in exhaust gases.

Kata kunci

Jaringan kolaborasi para penulis

27 penulis · 84 tautan kepenulisan bersama · 36 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Indonesian Institute of Sciences
  • Sebelas Maret University
  • Bandung Institute of Technology
  • Zhejiang University of Technology
  • Kumamoto University
  • Universitas Negeri Padang
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Herri SusantoBandung Institute of Technology1
I. G. B. N. MakertiharthaBandung Institute of Technology1
Petric Marc RuyaBandung Institute of Technology1
Dwi HantokoZhejiang University of Technology1
Jenny RizkianaBandung Institute of Technology1
Mi YanZhejiang University of Technology1
Yanni SudiyaniIndonesian Institute of Sciences1
Eka TriwahyuniIndonesian Institute of Sciences1
Muryanto MuryantoIndonesian Institute of Sciences1
Dian BurhaniIndonesian Institute of Sciences1
Anny SulaswatyIndonesian Institute of Sciences1
Haznan AbimanyuIndonesian Institute of Sciences1
Firman Asto PutroSebelas Maret University1
Sunu Herwi PranoloSebelas Maret University1
Ary SetyawanSebelas Maret University1
Nanang QosimPoliteknik Negeri Malang1
Am. MufarrihPoliteknik Negeri Malang1
Zakki Fuadi EmzainPoliteknik Negeri Malang1
Andre KurniawanUniversitas Negeri Padang1
Moh. Nasir HariyantoPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Performance of Transition Metal Supported Al2O3 Coated on Honeycomb Catalysts and Its Segmentation on Exhaust Gasses Oxidation</dc:title>
	<dc:creator xml:lang="en">Buwono, Haris Puspito</dc:creator>
	<dc:creator xml:lang="en">Wicaksana, Hangga</dc:creator>
	<dc:creator xml:lang="en">Hartono, Moh</dc:creator>
	<dc:creator xml:lang="en">Waluyo, Joko</dc:creator>
	<dc:creator xml:lang="en">Daroini, Moch. Fauzun</dc:creator>
	<dc:creator xml:lang="en">Muslim, Ilham Taufik</dc:creator>
	<dc:creator xml:lang="en">Machida, Masato</dc:creator>
	<dc:subject xml:lang="en">Catalytic converter</dc:subject>
	<dc:subject xml:lang="en">Honeycomb</dc:subject>
	<dc:subject xml:lang="en">CO oxidation</dc:subject>
	<dc:subject xml:lang="en">HC oxidation</dc:subject>
	<dc:subject xml:lang="en">Segmentation</dc:subject>
	<dc:subject xml:lang="en">Transition metal</dc:subject>
	<dc:description xml:lang="en">The oxidation of carbon monoxide (CO) and unburnt hydrocarbons (HC) under segmented honeycomb catalysts was investigated using actual exhaust gas mixtures from a gasoline-fueled internal combustion engine of a motorcycle. The honeycomb catalysts were prepared through a wet process, resulting in four types coated with transition metals (Cu, Cr, Fe, and Ni) supported on Al2O3. The oxidation of CO and HC was monitored using an exhaust gas analyzer across a range of air-to-fuel ratios (AFR), from lean to rich, under stationary conditions. The results demonstrate that the honeycomb catalysts effectively decreased CO and HC concentrations in the exhaust gas. Among the transition metal oxide honeycomb catalysts, Cr and Ni exhibited high CO and HC conversion rates, surpassing those observed with Cu. The average CO and HC conversion calculations, spanning from lean to rich air-to-fuel ratios, were consistent with the actual conversion rates achieved. Furthermore, the study investigated the effect of honeycomb segmentation on CO and HC conversion. Surprisingly, the catalytic performance of Cr and Ni remained high even with longer gaps in the honeycomb. Interestingly, the conversion of CO and HC over the iron oxide honeycomb catalyst increased as the gap in the honeycomb became longer. This is likely due to an increase in the gap size and enhanced re-mixing of reactants (CO, HC, and O2) caused by recirculation. Thus, this study provides valuable elucidation on the potential application of segmented honeycomb catalysts for reducing CO and HC emissions in exhaust gases.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2024-04-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/10686</dc:identifier>
	<dc:identifier>10.31603/ae.10686</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 7 No. 1 (2024); 86-96</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/10686/4968</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Haris Puspito Buwono, Hangga Wicaksana, Moh Hartono, Joko Waluyo, Moch. Fauzun Daroini, Ilham Taufik Muslim, Masato Machida</dc:rights>
</oai_dc:dc>