Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Biodiesel Production from Food Industrial Waste of Soybean Oil using a Lipase-nanoparticle Bio-composite Catalyst

Automotive Experiences · Vol. 7 No. 2 (2024) · hlm. 189–206

DOI
10.31603/ae.10707
ISSN
2615-6636, 2615-6202
Terbit
2024-08-04
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

In this study, a packed-bed reactor was used to produce biodiesel from disposed soybean oil using a lipase-nanoparticle bio composite catalyst. During the transesterification process of the ”˜disposed of/used soybean oil’, different nano catalysts were employed such as nanoparticles of Ni-doped ZnO, Fe3O4, Alkylcelite, Poly-acrylonitrile fibres and Poly-acrylonitrile nanofibrous membrane and they were abbreviated as CI, CII, CIII, CIV and CIV respectively. In each case of biodiesel production, there were two levels of process parameters like flow velocity (such as 0.25 mL/min-1.25 mL/min) and the reaction time (20 and 100 h) were considered for analyses. From the derived biofuel, the biodiesel blends were prepared as B50 (50% diesel and 50% biodiesel) and B75 (25% diesel and 75% biodiesel). The synthesis of biofuel results, in the biodiesel conversion of cepacia lipase with Poly-acrylonitrile nanofibrous membrane nanoparticles being recorded at about 85% at a 1.25 mL/min flow rate, which is the maximum biodiesel conversion among five grades. The shortlisted biodiesel performances were analyzed by varying the engine speed, grade and kind of biodiesel, The observed results were analyzed. The B50CIV and B75CIV blends recorded the maximum BSFC at 1800 rpm engine speed. CO2 emission by diesel is about 2.3 vol% was recorded. It is the highest value compared to biodiesel blends (B50 and B75). The emission of NOx with the B50CII blend was 220 ppm at the engine speed of 1800 rpm. Based on the experimental results, B50CIV serves affordable fuel and is recommended among those tested in this investigation for CI engines.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 16 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Saveetha University
  • King Mongkut's University of Technology North Bangkok
  • Yeshwantrao Chavan College of Engineering
  • Umm al-Qura University
  • Politeknik Negeri Medan
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sanjay Mavinkere RangappaKing Mongkut's University of Technology North Bangkok1
Abdi Hanra SebayangPoliteknik Negeri Medan1
Suchart SiengchinKing Mongkut's University of Technology North Bangkok1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Biodiesel Production from Food Industrial Waste of Soybean Oil using a Lipase-nanoparticle Bio-composite Catalyst</dc:title>
	<dc:creator xml:lang="en">Thanikodi, Sathish</dc:creator>
	<dc:creator xml:lang="en">Rathinasamy, Saravanan</dc:creator>
	<dc:creator xml:lang="en">Giri, Jayant</dc:creator>
	<dc:creator xml:lang="en">Jagadeesan, Aravind Kumar</dc:creator>
	<dc:creator xml:lang="en">Makki, Emad</dc:creator>
	<dc:subject xml:lang="en">Waste soyabean oil</dc:subject>
	<dc:subject xml:lang="en">Biodiesel production</dc:subject>
	<dc:subject xml:lang="en">Biocatalyst</dc:subject>
	<dc:subject xml:lang="en">Transesterification</dc:subject>
	<dc:subject xml:lang="en">Engine performance parameters</dc:subject>
	<dc:description xml:lang="en">In this study, a packed-bed reactor was used to produce biodiesel from disposed soybean oil using a lipase-nanoparticle bio composite catalyst. During the transesterification process of the ”˜disposed of/used soybean oil’, different nano catalysts were employed such as nanoparticles of Ni-doped ZnO, Fe3O4, Alkylcelite, Poly-acrylonitrile fibres and Poly-acrylonitrile nanofibrous membrane and they were abbreviated as CI, CII, CIII, CIV and CIV respectively. In each case of biodiesel production, there were two levels of process parameters like flow velocity (such as 0.25 mL/min-1.25 mL/min) and the reaction time (20 and 100 h) were considered for analyses. From the derived biofuel, the biodiesel blends were prepared as B50 (50% diesel and 50% biodiesel) and B75 (25% diesel and 75% biodiesel). The synthesis of biofuel results, in the biodiesel conversion of cepacia lipase with Poly-acrylonitrile nanofibrous membrane nanoparticles being recorded at about 85% at a 1.25 mL/min flow rate, which is the maximum biodiesel conversion among five grades. The shortlisted biodiesel performances were analyzed by varying the engine speed, grade and kind of biodiesel, The observed results were analyzed. The B50CIV and B75CIV blends recorded the maximum BSFC at 1800 rpm engine speed. CO2 emission by diesel is about 2.3 vol% was recorded. It is the highest value compared to biodiesel blends (B50 and B75). The emission of NOx with the B50CII blend was 220 ppm at the engine speed of 1800 rpm. Based on the experimental results, B50CIV serves affordable fuel and is recommended among those tested in this investigation for CI engines.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2024-08-04</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/10707</dc:identifier>
	<dc:identifier>10.31603/ae.10707</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 7 No. 2 (2024); 189-206</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/10707/5109</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Sathish Thanikodi, Saravanan Rathinasamy, Jayant Giri, Aravind Kumar Jagadeesan, Emad Makki</dc:rights>
</oai_dc:dc>