Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Experimental and Finite Element Study of Rollover Protection Structure for a 22-Seat Man Hauler Superstructure Vehicle

Automotive Experiences · Vol. 7 No. 3 (2024) · hlm. 389–405

DOI
10.31603/ae.11380
ISSN
2615-6636, 2615-6202
Terbit
2024-11-21
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

The application of man hauler which classified as heavy-duty vehicle and operated on the upper ground mining, requires high safety measurement as arrange in the UN-ECE No. 66. The safety measure demands vehicles to undergo both structural testing and analysis. The investigation of structural testing for heavy-duty vehicles has been developed to the rollover testing that used tilting platform, to see the deformation impact toward the residual space and foresight opportunities for further development on the vehicle structure or warning system. Rollover testing is costly and time consuming, so new or developed vehicle structure needs finite element model analysis, to predict the deformation level due to rollover incident. Both testing have the same goal which is to confirm the vehicle structure able to protect the passenger compartment. Therefore, this study aims to present a guidance to test a complete set of 22-seat man hauler vehicle with stress distribution analysis, quasi-static loading test of body section, and tilting platform. The results of the stress distribution test are that the load is concentrated on the element number 148 in the rear UNP 100 profile. The results of the quasi-static loading test are that the maximum stress that occurs is 33 % b the allowable stress. The simulation result under this condition shows that the maximum deflection value occurred in the side frame structure is 167.9 mm. The largest deformation due to rolling test occurred at point E has value of 27 mm located on the right side that experienced impact on the floor during the test. The overall testing and analysis are able to verify and confirm the vehicle structural strength, that the vehicle able to withstand the rollover impact and to protect the passengers.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 127 tautan kepenulisan bersama · 42 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Universitas Halu Oleo
  • Universitas Mercu Buana Yogyakarta
  • Pancasila University
  • Badan Pengkajian dan Penerapan Teknologi
  • Universitas Muhammadiyah Magelang
  • Pusat Pelaporan dan Analisis Transaksi Keuangan
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mustasyar PerkasaNational Research and Innovation Agency5
Muji SetiyoUniversitas Muhammadiyah Magelang5
Ogi IvanoBadan Pengkajian dan Penerapan Teknologi4
Abdul Rohman FaridAfiliasi tidak diketahui4
Yudi IrawadiNational Research and Innovation Agency4
Budi HaryantoNational Research and Innovation Agency3
Hedi PurnomoAfiliasi tidak diketahui3
Ramli JunidUniversiti Malaysia Pahang Al-Sultan Abdullah3
Mohammad RosyidiNational Research and Innovation Agency2
Agri SuwandiPancasila University2
Andi KhaeruniUniversitas Halu Oleo1
Teguh WijayantoUniversitas Halu Oleo1
Indriyani NurUniversitas Halu Oleo1
Agus KurniaUniversitas Halu Oleo1
Farda Pega Libra GojandraPancasila University1
La Masi La MasiAfiliasi tidak diketahui1
Faad MaondeUniversitas Halu Oleo1
Ida ZulaehaAfiliasi tidak diketahui1
Subyantoro SubyantoroAfiliasi tidak diketahui1
Maryam Alifah HananUniversitas Mercu Buana Yogyakarta1
Yohana Koronka Adi YuwanaUniversitas Mercu Buana Yogyakarta1
Taufiq Nur WicaksonoUniversitas Mercu Buana Yogyakarta1
Yulius LiqUniversitas Mercu Buana Yogyakarta1
Muhammad Zaki MubarakPusat Pelaporan dan Analisis Transaksi Keuangan1
Susanti SusantiUniversitas Islam Negeri Ar-Raniry1
Sofwan HidayatNational Research and Innovation Agency1
Tri WidodoNational Research and Innovation Agency1
Harris ZaenalNational Research and Innovation Agency1
Nofriyadi NurdamNational Research and Innovation Agency1
Andi Muhdiar KadirNational Research and Innovation Agency1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Experimental and Finite Element Study of Rollover Protection Structure for a 22-Seat Man Hauler Superstructure Vehicle</dc:title>
	<dc:creator xml:lang="en">Gozali, Muchamad</dc:creator>
	<dc:creator xml:lang="en">Karmiadji, Djoko Wahyu</dc:creator>
	<dc:creator xml:lang="en">Libyawati, Wina</dc:creator>
	<dc:creator xml:lang="en">Haryanto, Budi</dc:creator>
	<dc:creator xml:lang="en">Masrur, Muhamad</dc:creator>
	<dc:creator xml:lang="en">Setyawan, Arief</dc:creator>
	<dc:creator xml:lang="en">Sulistiyo, Wahyu</dc:creator>
	<dc:creator xml:lang="en">Nuramin, Makmuri</dc:creator>
	<dc:creator xml:lang="en">Anwar, Anwar</dc:creator>
	<dc:creator xml:lang="en">Susilo, Budi</dc:creator>
	<dc:subject xml:lang="en">Rollover</dc:subject>
	<dc:subject xml:lang="en">Superstructure</dc:subject>
	<dc:subject xml:lang="en">Man-hauler</dc:subject>
	<dc:subject xml:lang="en">UN-ECE R66</dc:subject>
	<dc:description xml:lang="en">The application of man hauler which classified as heavy-duty vehicle and operated on the upper ground mining, requires high safety measurement as arrange in the UN-ECE No. 66. The safety measure demands vehicles to undergo both structural testing and analysis. The investigation of structural testing for heavy-duty vehicles has been developed to the rollover testing that used tilting platform, to see the deformation impact toward the residual space and foresight opportunities for further development on the vehicle structure or warning system. Rollover testing is costly and time consuming, so new or developed vehicle structure needs finite element model analysis, to predict the deformation level due to rollover incident. Both testing have the same goal which is to confirm the vehicle structure able to protect the passenger compartment. Therefore, this study aims to present a guidance to test a complete set of 22-seat man hauler vehicle with stress distribution analysis, quasi-static loading test of body section, and tilting platform. The results of the stress distribution test are that the load is concentrated on the element number 148 in the rear UNP 100 profile.&amp;nbsp; The results of the quasi-static loading test are that the maximum stress that occurs is 33 % b the allowable stress. The simulation result under this condition shows that the maximum deflection value occurred in the side frame structure is 167.9 mm. The largest deformation due to rolling test occurred at point E has value of 27 mm located on the right side that experienced impact on the floor during the test. The overall testing and analysis are able to verify and confirm the vehicle structural strength, that the vehicle able to withstand the rollover impact and to protect the passengers.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2024-11-21</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/11380</dc:identifier>
	<dc:identifier>10.31603/ae.11380</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 7 No. 3 (2024); 389-405</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/11380/5470</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Muchamad Gozali, Djoko Wahyu Karmiadji, Wina Libyawati, Budi Haryanto, Muhamad Masrur, Arief Setyawan, Wahyu Sulistiyo, Makmuri Nuramin, Anwar Anwar, Budi Susilo</dc:rights>
</oai_dc:dc>