Jurnal
SINTA 1
Optimization of Metallic Catalytic Converters to Reduce CO Emissions and Increase Engine Power
Automotive Experiences · Vol. 7 No. 2 (2024) · hlm. 299–309
ISSN 2615-6636, 2615-6202
Terbit 2024-09-18
Penerbit Universitas Muhammadiyah Magelang
Bahasa en
Abstrak
Metallic catalytic converter (MCC) is one of the technologies widely applied to motorcycle exhausts which aims to improve exhaust emission to be more environmentally friendly. However, even though many studies have been conducted, optimal design has not been achieved compared to other designs. Through this research, the Taguchi method is proposed as an alternative method to find the optimum parameters of MCC. The Taguchi method was chosen because of its ability to find a robust combination of parameters. There are four MCC parameters used as inputs while each parameter consists of three levels, thus the design used is the L18 Orthogonal Array (OA) which each combination is tested on three types of motorcycles, namely Moped, Automatic, and Sports. The signal-to-noise ratio (S/N) was adopted as one of the quality indicators of each combination. The optimization results showed that the best MCC design to reduce CO emissions is STD PGM. However, the optimum CO design can be used as an alternative because the difference in the S/N ratio is only -0.372. Meanwhile, the optimum CO design has another advantage over the STD PGM, namely the S/N value of the power ratio which tends to be higher with a difference of 5.037 compared to the STD PGM. Then, the best MCC design capable of increasing power is the optimum power design. The optimum power design has a superior S/N ratio with a difference of 5.404. In terms of emission, the optimum power design tends to be lower by a difference of -1.875 compared to the STD PGM.
Jaringan kolaborasi para penulis
20 penulis ·
60 tautan kepenulisan bersama
· 43 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universitas Negeri Surabaya Yogyakarta State University State University of Malang Mercu Buana University Sultan Ageng Tirtayasa University University of Sarjanawiyata Tamansiswa Universitas Muhammadiyah Purworejo Organisasi lain
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Optimization of Metallic Catalytic Converters to Reduce CO Emissions and Increase Engine Power</dc:title>
<dc:creator xml:lang="en">Warju, Warju</dc:creator>
<dc:creator xml:lang="en">Ariyanto, Sudirman Rizki</dc:creator>
<dc:creator xml:lang="en">Pratama, Muhammad Yandi</dc:creator>
<dc:creator xml:lang="en">Haratama, Kusuma Refa</dc:creator>
<dc:subject xml:lang="en">Metallic catalytic converter</dc:subject>
<dc:subject xml:lang="en">Motorcycle</dc:subject>
<dc:subject xml:lang="en">Taguchi method</dc:subject>
<dc:subject xml:lang="en">CO emission</dc:subject>
<dc:subject xml:lang="en">Engine power</dc:subject>
<dc:description xml:lang="en">Metallic catalytic converter (MCC) is one of the technologies widely applied to motorcycle exhausts which aims to improve exhaust emission to be more environmentally friendly. However, even though many studies have been conducted, optimal design has not been achieved compared to other designs. Through this research, the Taguchi method is proposed as an alternative method to find the optimum parameters of MCC. The Taguchi method was chosen because of its ability to find a robust combination of parameters. There are four MCC parameters used as inputs while each parameter consists of three levels, thus the design used is the L18 Orthogonal Array (OA) which each combination is tested on three types of motorcycles, namely Moped, Automatic, and Sports. The signal-to-noise ratio (S/N) was adopted as one of the quality indicators of each combination. The optimization results showed that the best MCC design to reduce CO emissions is STD PGM. However, the optimum CO design can be used as an alternative because the difference in the S/N ratio is only -0.372. Meanwhile, the optimum CO design has another advantage over the STD PGM, namely the S/N value of the power ratio which tends to be higher with a difference of 5.037 compared to the STD PGM. Then, the best MCC design capable of increasing power is the optimum power design. The optimum power design has a superior S/N ratio with a difference of 5.404. In terms of emission, the optimum power design tends to be lower by a difference of -1.875 compared to the STD PGM.</dc:description>
<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
<dc:date>2024-09-18</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/11587</dc:identifier>
<dc:identifier>10.31603/ae.11587</dc:identifier>
<dc:source xml:lang="en">Automotive Experiences; Vol. 7 No. 2 (2024); 299-309</dc:source>
<dc:source>2615-6636</dc:source>
<dc:source>2615-6202</dc:source>
<dc:language>en</dc:language>
<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/11587/5355</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2024 Warju Warju, Sudirman Rizki Ariyanto, Muhammad Yandi Pratama, Kusuma Refa Haratama</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Warju, W., Ariyanto, S. R., Pratama, M. Y., & Haratama, K. R. (2024). Optimization of Metallic Catalytic Converters to Reduce CO Emissions and Increase Engine Power. Automotive Experiences, 7(2), 299–309. https://doi.org/10.31603/ae.11587
Salin
IEEE
W. Warju, S. R. Ariyanto, M. Y. Pratama, and K. R. Haratama, “Optimization of Metallic Catalytic Converters to Reduce CO Emissions and Increase Engine Power,” Automotive Experiences, vol. 7, no. 2, pp. 299–309, 2024, doi: 10.31603/ae.11587.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.