Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Crashworthiness Performance Study of 3D-Printed Multi-Cell Tubes Hybridized with Aluminum Under Axial Quasi-Static Testing

Automotive Experiences · Vol. 7 No. 3 (2024) · hlm. 567–578

DOI
10.31603/ae.12247
ISSN
2615-6636, 2615-6202
Terbit
2024-12-14
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

This study investigates the crashworthiness performance of 3D-printed hybrid tubes, fabricated using PLA and PACF filaments with varying shell thicknesses (1, 1.5, and 2 mm). The hybrid tubes, composed of a shell, aluminum, and multi-cell structure, were subjected to axial quasi-static testing. Results indicate that both shell thickness and filament type significantly influence crashworthiness. PLA specimens with a shell thickness of 2 mm absorbed 504 J of energy, whereas PACF specimens with the same thickness absorbed only 342.9 J. The deformation mode analysis revealed mixed deformation patterns, including diamond, fracture, and fragmented modes. The study also evaluated specific energy absorption (SEA) and crushing force efficiency (CFE). The PLA specimen with a 2 mm shell thickness exhibited the highest SEA value of 18.61 J/g among all specimens. In contrast, the PACF specimen with the same shell thickness demonstrated the highest CFE value of 0.82 among the tested specimens. Overall, this research contributes insights into the design optimization of 3D-printed hybrid tubes for enhanced crashworthiness.

Kata kunci

Jaringan kolaborasi para penulis

20 penulis · 57 tautan kepenulisan bersama · 46 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Syarif Hidayatullah State Islamic University Jakarta
  • University of Indonesia
  • Indonesia Defense University
  • Nano Center Indonesia
  • Mercu Buana University
  • Indonesian Institute of Sciences
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Jos IstiyantoUniversity of Indonesia1
Mohammad AdhityaUniversity of Indonesia1
Teguh MuttaqieNational Research and Innovation Agency1
Yana TaryanaNational Research and Innovation Agency1
Danang Pamungkas PriambodoSyarif Hidayatullah State Islamic University Jakarta1
Sitti Ahmiatri SaptariSyarif Hidayatullah State Islamic University Jakarta1
Maykel T. E. ManawanIndonesia Defense University1
HadiyawarmanNational Research and Innovation Agency1
Ratna Isnanita AdmiUniversity of Indonesia1
Didik AryantoIndonesian Institute of Sciences1
Alfian NoviyantoMercu Buana University1
Faras AfifahNational Research and Innovation Agency1
Aga RidhovaNational Research and Innovation Agency1
Pramitha Yuniar Diah MaulidaNano Center Indonesia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Crashworthiness Performance Study of 3D-Printed Multi-Cell Tubes Hybridized with Aluminum Under Axial Quasi-Static Testing</dc:title>
	<dc:creator xml:lang="en">Ardiansyah, Riki</dc:creator>
	<dc:creator xml:lang="en">Indriani, Fitri Karina</dc:creator>
	<dc:creator xml:lang="en">Hidayat, Dony</dc:creator>
	<dc:creator xml:lang="en">Tjahjono, Arif</dc:creator>
	<dc:creator xml:lang="en">Nurrohmad, Abian</dc:creator>
	<dc:creator xml:lang="en">Marta, Aryandi</dc:creator>
	<dc:subject xml:lang="en">Crashworthiness;</dc:subject>
	<dc:subject xml:lang="en">Hybrid Tubes;</dc:subject>
	<dc:subject xml:lang="en">3D Printing;</dc:subject>
	<dc:subject xml:lang="en">Energy Absorption;</dc:subject>
	<dc:subject xml:lang="en">Deformation.</dc:subject>
	<dc:description xml:lang="en">This study investigates the crashworthiness performance of 3D-printed hybrid tubes, fabricated using PLA and PACF filaments with varying shell thicknesses (1, 1.5, and 2 mm). The hybrid tubes, composed of a shell, aluminum, and multi-cell structure, were subjected to axial quasi-static testing. Results indicate that both shell thickness and filament type significantly influence crashworthiness. PLA specimens with a shell thickness of 2 mm absorbed 504 J of energy, whereas PACF specimens with the same thickness absorbed only 342.9 J. The deformation mode analysis revealed mixed deformation patterns, including diamond, fracture, and fragmented modes. The study also evaluated specific energy absorption (SEA) and crushing force efficiency (CFE). The PLA specimen with a 2 mm shell thickness exhibited the highest SEA value of 18.61 J/g among all specimens. In contrast, the PACF specimen with the same shell thickness demonstrated the highest CFE value of 0.82 among the tested specimens. Overall, this research contributes insights into the design optimization of 3D-printed hybrid tubes for enhanced crashworthiness.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2024-12-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/12247</dc:identifier>
	<dc:identifier>10.31603/ae.12247</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 7 No. 3 (2024); 567-578</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/12247/5516</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Riki Ardiansyah, Fitri Karina Indriani, Dony Hidayat, Arif Tjahjono, Abian Nurrohmad, Aryandi Marta</dc:rights>
</oai_dc:dc>