Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Development of Battery Pack for Electric Motorcycle Complying with Safety Standard and Indonesia Regulation

Automotive Experiences · Vol. 8 No. 3 (2025) · hlm. 544–562

DOI
10.31603/ae.13442
ISSN
2615-6636, 2615-6202
Terbit
2025-12-14
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

This paper presents a comprehensive design methodology and mechanical evaluation of an electric motorcycle battery pack that fulfills both international safety standards and Indonesian regulations. As the country with the world’s largest motorcycle fleet, Indonesia faces significant challenges in transitioning to electric mobility—particularly in preventing battery malfunctions and mitigating accident risks. The design process begins by defining minimum technical requirements, ensuring regulatory compliance, and addressing geometric constraints, then proceed with the development of component architectures in accordance with industry best practices. Detailed models of the pack and its subassemblies are subjected to finite element analysis to verify structural integrity under demanding operational conditions. Key performance targets include an IP68 ingress protection rating, sufficient rigidity to withstand vibrational loads, and impact resistance for accident scenarios. Simulation results confirm that the final design maintains mechanical robustness across a variety of load cases. Building on these findings, the paper offers specific recommendations to further enhance pack performance and safety. The described methodology is fully reproducible and provides practical insights for efficient product development, even when resources are limited.

Kata kunci

Jaringan kolaborasi para penulis

17 penulis · 68 tautan kepenulisan bersama · 14 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Sampoerna University
  • The University of Tokyo
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muhammad AzizThe University of Tokyo2
Djati Wibowo DjamariSampoerna University2
Bentang Arief BudimanBandung Institute of Technology2
Farid TriawanSampoerna University2
Rakshidatu LestaluhuBandung Institute of Technology2
Annisa JusufBandung Institute of Technology1
Arya PrihutamaBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Development of Battery Pack for Electric Motorcycle Complying with Safety Standard and Indonesia Regulation</dc:title>
	<dc:creator xml:lang="en">Widyantara, Robby Dwianto</dc:creator>
	<dc:creator xml:lang="en">Wicaksono, Dito Ata'ul Momin</dc:creator>
	<dc:creator xml:lang="en">Priyatama, Syafiq Ade</dc:creator>
	<dc:creator xml:lang="en">Nugroho, Andika Pandu</dc:creator>
	<dc:creator xml:lang="en">Wiradibrata, Raihan</dc:creator>
	<dc:creator xml:lang="en">Agustin, Anggi Regiana</dc:creator>
	<dc:creator xml:lang="en">Tianqi, Lei</dc:creator>
	<dc:creator xml:lang="en">Wibowo, Agung</dc:creator>
	<dc:creator xml:lang="en">Nurprasetio, Ignatius Pulung</dc:creator>
	<dc:creator xml:lang="en">Budiman, Bentang Arief</dc:creator>
	<dc:subject xml:lang="en">Battery pack</dc:subject>
	<dc:subject xml:lang="en">Product development</dc:subject>
	<dc:subject xml:lang="en">Electric motorcycles</dc:subject>
	<dc:subject xml:lang="en">V diagram</dc:subject>
	<dc:subject xml:lang="en">Finite element analysis</dc:subject>
	<dc:description xml:lang="en">This paper presents a comprehensive design methodology and mechanical evaluation of an electric motorcycle battery pack that fulfills both international safety standards and Indonesian regulations. As the country with the world’s largest motorcycle fleet, Indonesia faces significant challenges in transitioning to electric mobility—particularly in preventing battery malfunctions and mitigating accident risks. The design process begins by defining minimum technical requirements, ensuring regulatory compliance, and addressing geometric constraints, then proceed with the development of component architectures in accordance with industry best practices. Detailed models of the pack and its subassemblies are subjected to finite element analysis to verify structural integrity under demanding operational conditions. Key performance targets include an IP68 ingress protection rating, sufficient rigidity to withstand vibrational loads, and impact resistance for accident scenarios. Simulation results confirm that the final design maintains mechanical robustness across a variety of load cases. Building on these findings, the paper offers specific recommendations to further enhance pack performance and safety. The described methodology is fully reproducible and provides practical insights for efficient product development, even when resources are limited.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-12-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/13442</dc:identifier>
	<dc:identifier>10.31603/ae.13442</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 8 No. 3 (2025); 544-562</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/13442/6421</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Robby Dwianto Widyantara, Dito Ata'ul Momin Wicaksono, Syafiq Ade Priyatama, Andika Pandu Nugroho, Raihan Wiradibrata, Anggi Regiana Agustin, Lei Tianqi, Agung Wibowo, Ignatius Pulung Nurprasetio, Bentang Arief Budiman</dc:rights>
</oai_dc:dc>