Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Synthesis and Characterization of Hybrid Teak Wood/Water Hyacinth Reinforced Polyester Composites for Eco-Friendly Motorcycle-Brake Pad Application

Automotive Experiences · Vol. 8 No. 3 (2025) · hlm. 640–652

DOI
10.31603/ae.14627
ISSN
2615-6636, 2615-6202
Terbit
2025-12-27
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

Non-asbestos materials are developed to replace asbestos as brake pad due to the dangers to human health. Therefore, this study aimed to explore the development of hybrid reinforced polyester composites using natural fibers such as teak wood and water hyacinth for brake pad application. Natural fibers were prepared by drying, cutting, and filtering through a 30-mesh sieve. The quantity of polyester/catalyst resin was fixed at 30 g, while teak wood and water hyacinth fibers were varied (15, 10, and 5 g). Fillers and composites were investigated using Fourier transform infrared (FTIR) and composites were further analyzed through scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), hardness, and wear resistance testing. The results of FTIR spectra showed that a 5TW-15WH sample had the lowest lignin content, while surface morphology of composites was inhomogeneous with few voids and cracks. Based on EDS investigation, carbon (C) and oxygen (O) were the two most abundant elements, indicating lignin, cellulose, and hemicellulose as the main components in composites. TGA measurement showed that 15TW-5WH sample had lower weight loss compared to others. Increasing water hyacinth caused a significant improvement in material performance, with 5 g teak wood-15 g water hyacinth in the composite, showing the highest hardness at 71.2 Shore D and lowest wear rate of 5.373 × 10-6 mm2/kg.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 192 tautan kepenulisan bersama · 149 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Jakarta
  • National Research and Innovation Agency
  • Syarif Hidayatullah State Islamic University Jakarta
  • Atma Jaya Catholic University of Indonesia
  • Universitas Trisakti
  • Nasional University
  • Universitas Pamulang
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sigit Dwi YudantoNational Research and Innovation Agency5
Dwi NantoSyarif Hidayatullah State Islamic University Jakarta4
Daniel EdbertAtma Jaya Catholic University of Indonesia3
Evi Ulina Margaretha SitumorangAtma Jaya Catholic University of Indonesia3
Cahaya RosyidanUniversitas Trisakti3
Bambang SoegijonoUniversity of Indonesia2
Basori BasoriNasional University2
Maman Kartaman AjiriyantoNational Research and Innovation Agency2
Jan SetiawanUniversitas Pamulang2
Hamdan Akbar NotonegoroSultan Ageng Tirtayasa University2
Silviana SimbolonUniversitas Pamulang2
Agung PremonoState University of Jakarta2
Sugeng PriyantoState University of Jakarta2
Danar Hari KrisyonoState University of Jakarta2
Fakhrony Sholahudin RohmanUniversity of Technology Malaysia2
Sudibyo SudibyoNational Research and Innovation Agency2
Syamsuir SyamsuirState University of Jakarta1
Ragil SukarnoState University of Jakarta1
Yohanes GunawanPoliteknik Energi dan Mineral Akamigas1
Apri WiyonoIndonesia University of Education1
YunasfiNational Research and Innovation Agency1
RamlanAfiliasi tidak diketahui1
Taufiq Al FariziSyarif Hidayatullah State Islamic University Jakarta1
Dinda TiheraSriwijaya University1
RuliyantaNasional University1
Rosika KriswariniNational Research and Innovation Agency1
Heri HardiyantiNational Research and Innovation Agency1
Yusmaniar YusmaniarState University of Jakarta1
Ramlan RamlanUniversitas Jambi1
Yunasfi YunasfiNational Research and Innovation Agency1
Fatma HusainiSriwijaya University1
Lisa SamuraUniversitas Trisakti1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Synthesis and Characterization of Hybrid Teak Wood/Water Hyacinth Reinforced Polyester Composites for Eco-Friendly Motorcycle-Brake Pad Application</dc:title>
	<dc:creator xml:lang="en">Susetyo, Ferry Budhi</dc:creator>
	<dc:creator xml:lang="en">Anggrainy, Rani</dc:creator>
	<dc:creator xml:lang="en">Lubi, Ahmad</dc:creator>
	<dc:creator xml:lang="en">Sahid, Ahmad Mashuri</dc:creator>
	<dc:creator xml:lang="en">Fathurahman, Ahmad</dc:creator>
	<dc:creator xml:lang="en">Kurniawati, Fitri</dc:creator>
	<dc:creator xml:lang="en">Ali, Nora'aini</dc:creator>
	<dc:creator xml:lang="en">Setiawan, Jan</dc:creator>
	<dc:subject xml:lang="en">IR Spectra</dc:subject>
	<dc:subject xml:lang="en">SEM Image</dc:subject>
	<dc:subject xml:lang="en">Thermal resistance</dc:subject>
	<dc:subject xml:lang="en">Hardness</dc:subject>
	<dc:subject xml:lang="en">Wear resistance</dc:subject>
	<dc:description xml:lang="en">Non-asbestos materials are developed to replace asbestos as brake pad due to the dangers to human health. Therefore, this study aimed to explore the development of hybrid reinforced polyester composites using natural fibers such as teak wood and water hyacinth for brake pad application. Natural fibers were prepared by drying, cutting, and filtering through a 30-mesh sieve. The quantity of polyester/catalyst resin was fixed at 30 g, while teak wood and water hyacinth fibers were varied (15, 10, and 5 g). Fillers and composites were investigated using Fourier transform infrared (FTIR) and composites were further analyzed through scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), hardness, and wear resistance testing. The results of FTIR spectra showed that a 5TW-15WH sample had the lowest lignin content, while surface morphology of composites was inhomogeneous with few voids and cracks. Based on EDS investigation, carbon (C) and oxygen (O) were the two most abundant elements, indicating lignin, cellulose, and hemicellulose as the main components in composites. TGA measurement showed that 15TW-5WH sample had lower weight loss compared to others. Increasing water hyacinth caused a significant improvement in material performance, with 5 g teak wood-15 g water hyacinth in the composite, showing the highest hardness at 71.2 Shore D and lowest wear rate of 5.373 × 10-6 mm2/kg.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-12-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/14627</dc:identifier>
	<dc:identifier>10.31603/ae.14627</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 8 No. 3 (2025); 640-652</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/14627/6411</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Ferry Budhi Susetyo, Rani Anggrainy, Ahmad Lubi, Ahmad Mashuri Sahid, Ahmad Fathurahman, Fitri Kurniawati, Nora'aini Ali, Jan Setiawan</dc:rights>
</oai_dc:dc>