Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Influence of Aluminum Thickness on Energy Absorption and Stability of Circular Crash Box Performance Under Axial Load

Automotive Experiences · Vol. 8 No. 3 (2025) · hlm. 726–740

DOI
10.31603/ae.15149
ISSN
2615-6636, 2615-6202
Terbit
2025-12-28
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en

Abstrak

The need for improved vehicle safety, particularly in the face of rising road traffic accidents, makes the optimization of crash box designs crucial. This study addresses the impact performance of circular cross-section crash boxes, focusing on how variations in aluminum thickness affect energy absorption and deformation behavior under axial impact loading. A combination of numerical simulations and experimental tests was used to evaluate the crash box performance across different aluminum thicknesses ranging from 1 mm to 3 mm. The results show that increasing thickness improves energy absorption, with the 3 mm thick specimen absorbing the highest energy of 7.3089 kJ, while the 1 mm specimen absorbed only 1.1018 kJ. However, thicker specimens exhibited higher peak forces and force fluctuations, suggesting potential instability after the peak load, while intermediate thicknesses 1.5 mm and 2 mm provided a better balance of energy absorption and structural stability. This research contributes to the development of more efficient crash box designs by providing insights into the optimal material thickness for crashworthiness, with a recommended thickness range of 1.5 mm to 2 mm.

Kata kunci

Jaringan kolaborasi para penulis

34 penulis · 115 tautan kepenulisan bersama · 59 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Institut Teknologi Sepuluh Nopember
  • Politeknik Pelayaran Surabaya
  • Politeknik Penerbangan Surabaya
  • Khairun University
  • Universitas Widya Gama Malang
  • Universitas Merdeka Madiun
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Moch. Agus ChoironUniversity of Brawijaya3
A’yan SabitahKhairun University2
Anindito PurnowidodoUniversity of Brawijaya2
Achfas ZacoebUniversity of Brawijaya2
Setyo Hariyadi Suranto PutroAfiliasi tidak diketahui1
Ahmad Hamim SuudyAfiliasi tidak diketahui1
Ridwan RidwanUniversitas Merdeka Madiun1
Bambang JunipitoyoPoliteknik Penerbangan Surabaya1
Agus PrawotoPoliteknik Pelayaran Surabaya1
Monika Retno GunartiPoliteknik Pelayaran Surabaya1
Wahyu Nur FauziPoliteknik Pelayaran Surabaya1
Gembong Edhi SetyawanUniversity of Brawijaya1
Diva KurnianingtyasUniversity of Brawijaya1
Allan E.W. RennieAfiliasi tidak diketahui1
Yudhi AriadiUniversity of Warwick1
Rosadila FebritasariInstitut Teknologi Nasional Malang1
Imam KusyairiUniversity of Brawijaya1
Johan Wayan DikaUniversitas Nahdlatul Ulama Blitar1
Dyah RiandadariAfiliasi tidak diketahui1
Rusmini Sri MaryatiAfiliasi tidak diketahui1
Dewi PuspitasariUniversitas Negeri Surabaya1
Mukhlis MusliminKhairun University1
Edi WidodoUniversitas Muhammadiyah Sidoarjo1
R.A. IlyasUniversity of Technology Malaysia1
Gigih PriyandokoUniversitas Widya Gama Malang1
Ubaidillah UbaidillahSebelas Maret University1
Purbo SuwandonoUniversitas Widya Gama Malang1
Muhammad Ilman Nur SasongkoState University of Malang1
Mohammad Khoirul EffendiInstitut Teknologi Sepuluh Nopember1
Muhammad Ghazy Rizqi FahadaInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Influence of Aluminum Thickness on Energy Absorption and Stability of Circular Crash Box Performance Under Axial Load</dc:title>
	<dc:creator xml:lang="en">Wulandari, Diah</dc:creator>
	<dc:creator xml:lang="en">Guntur, Harus Laksana</dc:creator>
	<dc:creator xml:lang="en">Wicaksono, Sigit Tri</dc:creator>
	<dc:creator xml:lang="en">Wirawan, Willy Artha</dc:creator>
	<dc:subject xml:lang="en">Crash box</dc:subject>
	<dc:subject xml:lang="en">Aluminum thickness</dc:subject>
	<dc:subject xml:lang="en">Energy absorption</dc:subject>
	<dc:subject xml:lang="en">Axial impact loading</dc:subject>
	<dc:subject xml:lang="en">Deformation behavior</dc:subject>
	<dc:subject xml:lang="en">Structural stability</dc:subject>
	<dc:description xml:lang="en">The need for improved vehicle safety, particularly in the face of rising road traffic accidents, makes the optimization of crash box designs crucial. This study addresses the impact performance of circular cross-section crash boxes, focusing on how variations in aluminum thickness affect energy absorption and deformation behavior under axial impact loading. A combination of numerical simulations and experimental tests was used to evaluate the crash box performance across different aluminum thicknesses ranging from 1 mm to 3 mm. The results show that increasing thickness improves energy absorption, with the 3 mm thick specimen absorbing the highest energy of 7.3089 kJ, while the 1 mm specimen absorbed only 1.1018 kJ. However, thicker specimens exhibited higher peak forces and force fluctuations, suggesting potential instability after the peak load, while intermediate thicknesses 1.5 mm and 2 mm provided a better balance of energy absorption and structural stability. This research contributes to the development of more efficient crash box designs by providing insights into the optimal material thickness for crashworthiness, with a recommended thickness range of 1.5 mm to 2 mm.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2025-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/15149</dc:identifier>
	<dc:identifier>10.31603/ae.15149</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 8 No. 3 (2025); 726-740</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/15149/6415</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Diah Wulandari, Harus Laksana Guntur, Sigit Tri Wicaksono, Willy Artha Wirawan</dc:rights>
</oai_dc:dc>