Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Toward Diesel-Range Fuel Properties: Catalytic Upgrading of Waste Cooking Oil Biodiesel over Acid-Activated Bentonite

Automotive Experiences · Vol. 9 No. 2 (2026) · hlm. 644–660

DOI
10.31603/ae.15630
ISSN
2615-6636, 2615-6202
Terbit
2026-08-25
Penerbit
Universitas Muhammadiyah Magelang
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

Waste cooking oil (WCO)-derived biodiesel represents a promising renewable fuel because it simultaneously supports waste valorization, reduces dependence on petroleum-derived diesel, and lowers feedstock costs. However, its relatively high viscosity, oxygenated ester structure, and lower energy density compared with conventional diesel can limit its fuel performance. Most existing upgrading strategies address these limitations through catalytic cracking or deoxygenation at temperatures above 250–350 °C, frequently involving pressurized hydrogen and extensive conversion of fatty acid methyl esters (FAME) into hydrocarbon-rich fuels, leaving limited understanding of whether biodiesel properties can instead be improved through low-severity treatment while preserving its FAME-rich character. This study investigated H₂-free mild catalytic upgrading of WCO-derived biodiesel using untreated bentonite and HCl-activated bentonite at catalyst loadings of 0.20, 0.40, 0.60, and 0.80 wt% in a rotary reactor operated at 150 °C for 1 h, followed by density, kinematic viscosity, calorific value, flash point, FTIR, and GC–MS analyses. The treatment caused only negligible variation in density, from 0.842 g/cm³ for the initial biodiesel to 0.843–0.844 g/cm³ after upgrading, indicating that the bulk molecular characteristics of the fuel were largely retained, while the kinematic viscosity decreased substantially from 4.94 cSt to minimum values of 3.54 and 3.55 cSt at 0.20 and 0.40 wt%, respectively. The calorific value increased from 41.46 MJ/kg to a maximum of 42.39 MJ/kg at 0.80 wt%, corresponding to an improvement of approximately 2.24%, while the 0.60 and 0.80 wt% samples exhibited flash points of 57.5 and 56.5 °C, respectively. GC–MS analysis revealed a compositional redistribution from 65.48% FAME and 16.13% aliphatic hydrocarbons in the initial biodiesel to approximately 53.46% FAME and 28.48% aliphatic hydrocarbons at 0.80 wt%; meanwhile, the 0.40 wt% sample showed the formation of approximately 3.80% C12 hydrocarbons, consistent with its lower viscosity and greater volatility. FTIR spectra retained the characteristic ester C=O and long-chain aliphatic bands, supporting limited molecular transformation rather than extensive destruction of the FAME framework. These findings demonstrate that low-temperature, low-catalyst-loading bentonite treatment can selectively redistribute biodiesel components and tune fuel properties without deep conversion, providing a low-severity upgrading pathway that bridges conventional biodiesel processing and high-temperature hydrocarbon-fuel production.

Kata kunci

Jaringan kolaborasi para penulis

36 penulis · 122 tautan kepenulisan bersama · 65 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Muhammadiyah Magelang
  • Politeknik Negeri Semarang
  • University of Brawijaya
  • Universitas Negeri Padang
  • National Kaohsiung University of Science and Technology
  • University of Indonesia
  • Indian Maritime University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muji SetiyoUniversitas Muhammadiyah Magelang7
Wawan PurwantoUniversitas Negeri Padang3
Budi WaluyoUniversitas Muhammadiyah Magelang2
Aditya KolakotiIndian Maritime University2
Winarto WinartoUniversity of Brawijaya2
Femiana GapsariUniversity of Brawijaya2
Jerry Chih Tsong SuNational Kaohsiung University of Science and Technology1
Krismadinata KrismadinataUniversitas Negeri Padang1
Ahmad ArifUniversitas Negeri Padang1
Septiantar Tebe NursaputroPoliteknik Negeri Semarang1
Margana MarganaPoliteknik Negeri Semarang1
Marliyati MarliyatiPoliteknik Negeri Semarang1
Yusuf Dewantoro HerlambangPoliteknik Negeri Semarang1
Wahyu SulistiyoPoliteknik Negeri Semarang1
Nanang ApriandiPoliteknik Negeri Semarang1
Jin‐Cherng ShyuNational Kaohsiung University of Science and Technology1
Sujito SujitoState University of Malang1
Hasan MaksumUniversitas Negeri Padang1
Ahmad ArifUniversitas Negeri Padang1
Kathleen Ebora PadrigalanUniversity of Science and Technology of Southern Philippines1
Indra Candra SetiawanAfiliasi tidak diketahui1
I.N.G. WardanaUniversity of Brawijaya1
Rudy SoenokoUniversity of Brawijaya1
Hadi SarosoPoliteknik Negeri Malang1
Masyitoh BasabihUniversity of Indonesia1
Thasya Sabilla Putri RojakUniversity of Indonesia1
Roy Michael SurantaAmbulance Care (Sweden)1
Bambang PujiartoUniversitas Muhammadiyah Magelang1
An’nisa SolihahAfiliasi tidak diketahui1
Nofa ArdanaUniversitas Muhammadiyah Magelang1
Ahmad Tresno AdiUniversitas Muhammadiyah Magelang1
Sunaryo SunaryoUniversitas Sains Al-Qur'an1
Satish GeeriAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.unimma.ac.id/index.php/AutomotiveExperiences/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Toward Diesel-Range Fuel Properties: Catalytic Upgrading of Waste Cooking Oil Biodiesel over Acid-Activated Bentonite</dc:title>
	<dc:creator xml:lang="en">Rochman, Muhammad Latifur</dc:creator>
	<dc:creator xml:lang="en">Hamidi, Nurkholis</dc:creator>
	<dc:creator xml:lang="en">Winarto</dc:creator>
	<dc:subject xml:lang="en">Biodiesel</dc:subject>
	<dc:subject xml:lang="en">Waste cooking oil</dc:subject>
	<dc:subject xml:lang="en">Catalytic upgrading</dc:subject>
	<dc:description xml:lang="en">Waste cooking oil (WCO)-derived biodiesel represents a promising renewable fuel because it simultaneously supports waste valorization, reduces dependence on petroleum-derived diesel, and lowers feedstock costs. However, its relatively high viscosity, oxygenated ester structure, and lower energy density compared with conventional diesel can limit its fuel performance. Most existing upgrading strategies address these limitations through catalytic cracking or deoxygenation at temperatures above 250–350 °C, frequently involving pressurized hydrogen and extensive conversion of fatty acid methyl esters (FAME) into hydrocarbon-rich fuels, leaving limited understanding of whether biodiesel properties can instead be improved through low-severity treatment while preserving its FAME-rich character. This study investigated H₂-free mild catalytic upgrading of WCO-derived biodiesel using untreated bentonite and HCl-activated bentonite at catalyst loadings of 0.20, 0.40, 0.60, and 0.80 wt% in a rotary reactor operated at 150 °C for 1 h, followed by density, kinematic viscosity, calorific value, flash point, FTIR, and GC–MS analyses. The treatment caused only negligible variation in density, from 0.842 g/cm³ for the initial biodiesel to 0.843–0.844 g/cm³ after upgrading, indicating that the bulk molecular characteristics of the fuel were largely retained, while the kinematic viscosity decreased substantially from 4.94 cSt to minimum values of 3.54 and 3.55 cSt at 0.20 and 0.40 wt%, respectively. The calorific value increased from 41.46 MJ/kg to a maximum of 42.39 MJ/kg at 0.80 wt%, corresponding to an improvement of approximately 2.24%, while the 0.60 and 0.80 wt% samples exhibited flash points of 57.5 and 56.5 °C, respectively. GC–MS analysis revealed a compositional redistribution from 65.48% FAME and 16.13% aliphatic hydrocarbons in the initial biodiesel to approximately 53.46% FAME and 28.48% aliphatic hydrocarbons at 0.80 wt%; meanwhile, the 0.40 wt% sample showed the formation of approximately 3.80% C12 hydrocarbons, consistent with its lower viscosity and greater volatility. FTIR spectra retained the characteristic ester C=O and long-chain aliphatic bands, supporting limited molecular transformation rather than extensive destruction of the FAME framework. These findings demonstrate that low-temperature, low-catalyst-loading bentonite treatment can selectively redistribute biodiesel components and tune fuel properties without deep conversion, providing a low-severity upgrading pathway that bridges conventional biodiesel processing and high-temperature hydrocarbon-fuel production.</dc:description>
	<dc:publisher xml:lang="en">Universitas Muhammadiyah Magelang</dc:publisher>
	<dc:date>2026-08-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/15630</dc:identifier>
	<dc:identifier>10.31603/ae.15630</dc:identifier>
	<dc:source xml:lang="en">Automotive Experiences; Vol. 9 No. 2 (2026); 644-660</dc:source>
	<dc:source>2615-6636</dc:source>
	<dc:source>2615-6202</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unimma.ac.id/AutomotiveExperiences/article/view/15630/7044</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Muhammad Latifur Rochman, Nurkholis Hamidi, Winarto Winarto</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>