Akses terbuka Jurnal SINTA 1
Characterization of Industrial Pt-Sn/Al2O3 Catalyst and Transient Product Formations during Propane Dehydrogenation
Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2013) · hlm. 77–82
- ISSN
- 1978-2993
- Terbit
- 2013-06-30
- Penerbit
- Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
- Bahasa
- eng
Abstrak
The major problem plaguing propane dehydrogenation process is the coke formation on the Pt-Sn/Al2O3 catalyst which leads to catalyst deactivation. Due to information paucity, the physicochemical characteristics of the commercially obtained regenerated Pt-Sn/Al2O3 catalyst (operated in moving bed reactor) and coke formation at different temperatures of reaction were discussed. The physicochemical characterization of regenerated catalyst gave a BET surface area of 104.0 m2/g with graphitic carbon content of 8.0% indicative of incomplete carbon gasification during the industrial propylene production. Effect of temperatures on coke formation was identified by studying the product yield via temperature-programmed reaction carried out at 500oC, 600oC and 700oC. It was found that ethylene was precursor to carbon laydown while propylene tends to crack into methane. Post reaction, the spent catalyst possessed relatively lower surface area and pore radius whilst exhibited higher carbon content (31.80% at 700oC) compared to the regenerated catalyst. Significantly, current studies also found that higher reaction temperatures favoured the coke formation. Consequently, the propylene yield has decreased with reaction temperature. © 2013 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)Corrigendum/Erratum of this article at: https://doi.org/10.9767/bcrec.9.2.7136.155
Kata kunci
Jaringan kolaborasi para penulis
20 penulis · 56 tautan kepenulisan bersama · 5 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- Universiti Malaysia Pahang Al-Sultan Abdullah
- DRB-HICOM University of Automotive Malaysia
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Md. Maksudur Rahman Khan | Universiti Malaysia Pahang Al-Sultan Abdullah | 4 |
| Bamidele Victor Ayodele | Universiti Malaysia Pahang Al-Sultan Abdullah | 3 |
| Jolius Gimbun | Universiti Malaysia Pahang Al-Sultan Abdullah | 3 |
| Kah Weng Siew | Universiti Malaysia Pahang Al-Sultan Abdullah | 2 |
| Hua Chyn Lee | Universiti Malaysia Pahang Al-Sultan Abdullah | 2 |
| Kim Hoong Ng | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| Mohd Rizauddin Deraman | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| Chun How Ang | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| Soo Kee Chong | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| Zi Ying Kong | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| Mohd Nasir Nor Shahirah | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| M. Anwar Hossain | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| Hamidah Abdullah | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| Kaykobad Md. Rezaul Karim | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
| Huei Ruey Ong | DRB-HICOM University of Automotive Malaysia | 1 |
| Abu Yousuf | Universiti Malaysia Pahang Al-Sultan Abdullah | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.