Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Phototreatment of Palm Oil Mill Effluent (POME) over Cu/TiO2 Photocatalyst

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2014) · hlm. 121–127

DOI
10.9767/bcrec.9.2.6011.121-127
ISSN
1978-2993
Terbit
2014-08-30
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The current work reported on the use of different formulations of Cu/TiO2 photocatalysts for the UV-irradiation of palm oil mills effluent (POME). Different copper loadings, viz. 2 wt%, 5 wt%, 10 wt%, 15 wt%, 20 wt% and 25 wt% were doped onto titania. XRD pattern confirmed the presence of anatase TiO2 as primary phase due to mild calcination temperature (573 K). Photo-decomposition of POME over 20 wt% Cu/TiO2 exhibited the highest conversion (27.0%) attributed to its large pore diameter (20.0 nm). In addition, optimum loading was 0.83 g/l. © 2014 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 59 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • DRB-HICOM University of Automotive Malaysia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bamidele Victor AyodeleUniversiti Malaysia Pahang Al-Sultan Abdullah5
Jolius GimbunUniversiti Malaysia Pahang Al-Sultan Abdullah3
Hamidah AbdullahUniversiti Malaysia Pahang Al-Sultan Abdullah3
Kaykobad Md. Rezaul KarimUniversiti Malaysia Pahang Al-Sultan Abdullah3
Kah Sing HoUniversiti Malaysia Pahang Al-Sultan Abdullah2
Joanna Jo Ean ChyeUniversiti Malaysia Pahang Al-Sultan Abdullah2
Sim Yee ChinUniversiti Malaysia Pahang Al-Sultan Abdullah2
Kah Weng SiewUniversiti Malaysia Pahang Al-Sultan Abdullah2
Hua Chyn LeeUniversiti Malaysia Pahang Al-Sultan Abdullah2
M. Anwar HossainUniversiti Malaysia Pahang Al-Sultan Abdullah2
Huei Ruey OngDRB-HICOM University of Automotive Malaysia2
Abu YousufUniversiti Malaysia Pahang Al-Sultan Abdullah2
Mohd Nasir Nor ShahirahUniversiti Malaysia Pahang Al-Sultan Abdullah1
Md Noor Bin ArifinUniversiti Malaysia Pahang Al-Sultan Abdullah1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Phototreatment of Palm Oil Mill Effluent (POME) over Cu/TiO2 Photocatalyst</dc:title>
	<dc:creator>Ng, Kim Hoong</dc:creator>
	<dc:creator>Deraman, Mohd. Rizauddin</dc:creator>
	<dc:creator>Ang, Chun How</dc:creator>
	<dc:creator>Chong, Soo Kee</dc:creator>
	<dc:creator>Kong, Zi Ying</dc:creator>
	<dc:creator>Khan, Maksudur R.</dc:creator>
	<dc:creator>Cheng, Chin Kui</dc:creator>
	<dc:subject xml:lang="en-US">POME; Copper; TiO2; UV-irradiation</dc:subject>
	<dc:description xml:lang="en-US">The current work reported on the use of different formulations of Cu/TiO2 photocatalysts for the UV-irradiation of palm oil mills effluent (POME). Different copper loadings, viz. 2 wt%, 5 wt%, 10 wt%, 15 wt%, 20 wt% and 25 wt% were doped onto titania. XRD pattern confirmed the presence of anatase TiO2 as primary phase due to mild calcination temperature (573 K). Photo-decomposition of POME over 20 wt% Cu/TiO2 exhibited the highest conversion (27.0%) attributed to its large pore diameter (20.0 nm). In addition, optimum loading was 0.83 g/l. © 2014 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)</dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:contributor xml:lang="en-US">Ministry of Education Malaysia|Exploratory Research Grant Scheme RDU120613</dc:contributor>
	<dc:contributor xml:lang="en-US">Universiti Malaysia Pahang|Short Term Grant RDU120323</dc:contributor>
	<dc:date>2014-08-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/19453</dc:identifier>
	<dc:identifier>10.9767/bcrec.9.2.6011.121-127</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2014: BCREC Volume 9 Issue 2 Year 2014 (August 2014); 121-127</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/19453/9363</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2014 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>