Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Application of Tin(II) Chloride Catalyst for High FFA Jatropha Oil Esterification in Continuous Reactive Distillation Column

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2016) · hlm. 66–74

DOI
10.9767/bcrec.11.1.417.66-74
ISSN
1978-2993
Terbit
2016-04-01
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The application of heterogeneous solid acid catalysts in biodiesel production has become popular and gained significant attention over the last few years. It is since these types of catalysts hold the benefits in terms of easy separation from the product, reusability of the catalyst, high selectivity of the reaction. They are also considered sustainable and powerful particularly in organic synthesis. This work studied the use of tin(II) chloride as solid Lewis acid catalyst to promote the esterification reaction of high Free Fatty Acid (FFA) jatropha oil in continuous reactive distillation column. To obtain the optimum condition, the influences of reaction time, molar ratio of the reactant, and catalyst were investigated. It was revealed that the optimum condition was achieved at the molar ratio of methanol to FFA at 1:60, catalyst concentration of 5%, and reaction temperature of 60°C with the reaction conversion of 90%. This result was significantly superior to the identical reaction performed using batch reactor. The esterification of high FFA jatropha oil using reactive distillation in the presence of tin(II) chloride provided higher conversion than that of Amberlyst-15 heterogeneous catalyst and was comparable to that of homogenous sulfuric acid catalyst, which showed 30 and 94.71% conversion, respectively. The esterification reaction of high FFA jatropha oil was subsequently followed by transesterification reaction for the completion of the biodiesel production. Transesterification was carried out at 60 °C, molar ratio of methanol to oil of 1:6, NaOH catalyst of 1%, and reaction time of one hour. The jatropha biodiesel product resulted from this two steps process could satisfy the ASTM and Indonesian biodiesel standard in terms of ester content (97.79 %), density, and viscosity.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 110 tautan kepenulisan bersama · 60 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Diponegoro University
  • Universitas Gadjah Mada
  • Universiti Teknologi MARA
  • Muhammadiyah University of Surakarta
  • Institut Teknologi Indonesia
  • Universitas Ahmad Dahlan
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rochmadi RochmadiUniversitas Gadjah Mada10
Eko Agus SuyonoUniversitas Gadjah Mada6
Widayat WidayatDiponegoro University6
Marcelinus ChristwardanaInstitut Teknologi Indonesia5
Budhijanto BudhijantoUniversitas Gadjah Mada5
Kusmiyati KusmiyatiMuhammadiyah University of Surakarta5
Siti JamilatunUniversitas Ahmad Dahlan4
Haniif PrasetiawanState University of Semarang3
Harumi VenyUniversiti Teknologi MARA3
Apsari Puspita AiniDiponegoro University3
Prima Astuti HandayaniState University of Semarang3
Catur Rini WidyastutiState University of Semarang2
Abdullah AbdullahDiponegoro University2
Dessy AriyantiDiponegoro University2
Eni BudiyatiMuhammadiyah University of Surakarta2
Dhoni HartantoState University of Semarang2
Miradatul Najwa Muhd RodhiUniversiti Teknologi MARA2
Fazlena HamzahUniversiti Teknologi MARA2
Panut MulyonoUniversitas Gadjah Mada2
Wusana Agung WibowoSebelas Maret University2
Rochim Bakti CahyonoUniversitas Gadjah Mada2
Muhamad Maulana Azimatun NurDiponegoro University2
Mohammad Hossein AhmadiUniversity of Shahrood2
Ulfah Juniarti SiregarIPB University2
Lucia Tri SuwantiUniversitas Airlangga2
Tia ErfiantiUniversitas Gadjah Mada2
Andri Cahyo KumoroDiponegoro University2
Rita Dwi RatnaniUniversitas Wahid Hasyim1
W. WidiyantoDiponegoro University1
M. A. AdhiState University of Semarang1
Annisa Putri SalsabilaState University of Semarang1
Widya Hary CahyatiState University of Semarang1
Regina Marsha NathanielaState University of Semarang1
Sultan Aulia RahmatState University of Semarang1
Wandah WibawantoState University of Semarang1
Zuhriyan Ash Shiddieqy BahlawanState University of Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Application of Tin(II) Chloride Catalyst for High FFA Jatropha Oil Esterification in Continuous Reactive Distillation Column</dc:title>
	<dc:creator>Kusumaningtyas, Ratna Dewi</dc:creator>
	<dc:creator>Aji, Imam Novrizal</dc:creator>
	<dc:creator>Hadiyanto, Hadiyanto</dc:creator>
	<dc:creator>Budiman, Arief</dc:creator>
	<dc:subject xml:lang="en-US">Tin(II) Chloride; esterification; jatropha oil; biodiesel; reactive distillation</dc:subject>
	<dc:description xml:lang="en-US">The application of heterogeneous solid acid catalysts in biodiesel production has become popular and gained significant attention over the last few years. It is since these types of catalysts hold the benefits in terms of easy separation from the product, reusability of the catalyst, high selectivity of the reaction. They are also considered sustainable and powerful particularly in organic synthesis. This work studied the use of tin(II) chloride as solid Lewis acid catalyst to promote the esterification reaction of high Free Fatty Acid (FFA) jatropha oil in continuous reactive distillation column. To obtain the optimum condition, the influences of reaction time, molar ratio of the reactant, and catalyst were investigated. It was revealed that the optimum condition was achieved at the molar ratio of methanol to FFA at 1:60, catalyst concentration of 5%, and reaction temperature of 60°C with the reaction conversion of 90%. This result was significantly superior to the identical reaction performed using batch reactor. The esterification of high FFA jatropha oil using reactive distillation in the presence of tin(II) chloride provided higher conversion than that of Amberlyst-15 heterogeneous catalyst and was comparable to that of homogenous sulfuric acid catalyst, which showed 30 and 94.71% conversion, respectively. The esterification reaction of high FFA jatropha oil was subsequently followed by transesterification reaction for the completion of the biodiesel production. Transesterification was carried out at 60 °C, molar ratio of methanol to oil of 1:6, NaOH catalyst of 1%, and reaction time of one hour. The jatropha biodiesel product resulted from this two steps process could satisfy the ASTM and Indonesian biodiesel standard in terms of ester content (97.79 %), density, and viscosity. </dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2016-04-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/417</dc:identifier>
	<dc:identifier>10.9767/bcrec.11.1.417.66-74</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2016: BCREC Volume 11 Issue 1 Year 2016 (April 2016); 66-74</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/417/301</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>