Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Physicochemical Characteristics of Titania Particles Synthesized with Gelatin as a Template Before and After Regeneration and Their Performance in Photocatalytic Methylene Blue

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2024) · hlm. 242–251

DOI
10.9767/bcrec.20138
ISSN
1978-2993
Terbit
2024-08-30
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

TiO2 material has an important position in the processing of methylene blue waste because it is economical, has abundant polymorphs, high sustainability and supports green chemistry applications. Mesoporous TiO2 is a porous material that has higher effectiveness than other TiO2 because the pore structure has a large diameter at the nano scale (2-50 nm) with a regular shape so that the surface area and pore volume are greater than the average for other TiO2. The synthesis of mesopore TiO2 material has so far used the sol-gel route with synthetic pore directing agents such as P123 which can be replaced with gelatin as a cheaper and safer pore directing agent with high sustainability and abundance. Based on the description above, this research aims to photodegrade methylene blue using mesoporous TiO2 (m-TiO2) nanoparticles which were prepared by the sol–gel method using gelatin and P123 as template. X-ray diffraction (XRD), scanning electron microscopy (SEM), Electron dispersive X-Ray (EDX), and UV–vis spectroscopy techniques were used to characterize the samples. Photocatalytic activities of samples for methylene blue degradation were investigated. The catalyst before and after regeneration will be studied so that the effect of regeneration on the results of methylene blue photocatalysis with m-TiO2 can be determined. XRD results confirmed the formation of the anatase and rutile phase for the TiO2 nanoparticles, with crystallite sizes larger after regeneration in the range of 9–21 nm. The large particle size was after regeneration due to the promotion by high temperature treatment. TiO2 nanoparticles showed the best photocatalytic activity on the first use to 91% and remained stable after four cycles with photodegradation efficiency up to 76% based on the measured UV-Vis spectroscopy. TiO2 as synthesis could be the best candidate for catalyst with the high performance after multicycle regeneration. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kata kunci

Jaringan kolaborasi para penulis

35 penulis · 90 tautan kepenulisan bersama · 41 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • Institut Teknologi Sepuluh Nopember
  • Tishk International University
  • University of Technology Malaysia
  • IPB University
  • Universitas Gadjah Mada
  • Universiti Brunei Darussalam
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Novia Amalia SholehaIPB University3
Agung Nugroho Catur SaputroSebelas Maret University2
Ika Uswatun HasanahSebelas Maret University2
Ida SetiariniSebelas Maret University2
Didik PrasetyokoInstitut Teknologi Sepuluh Nopember2
Nanik Dwi NurhayatiSebelas Maret University2
Bakti MulyaniSebelas Maret University2
Istinganah Saestu RohmahAfiliasi tidak diketahui2
Sabrina Devinta PoetryAfiliasi tidak diketahui1
Pramesta Rosa SalsabilaAfiliasi tidak diketahui1
Nanik Dwi NurharyatiSebelas Maret University1
Sandini Ajeng IstantiSebelas Maret University1
Wega TrisunaryantiUniversitas Gadjah Mada1
Yuvita Eka PertiwiSebelas Maret University1
Teguh Endah SaraswatiSebelas Maret University1
Suwiji LestariSebelas Maret University1
Hilmia AzizaSebelas Maret University1
Hasliza BahrujiUniversiti Brunei Darussalam1
Rizki Fauzia HanifAfiliasi tidak diketahui1
Wirawan CiptonugrohoSebelas Maret University1
Sawsan S. Al-RawiTishk International University1
Ahmad Hamdy IbrahimTishk International University1
Amellia ArdhanySebelas Maret University1
Agung cahyo saputroSebelas Maret University1
Muhammad Adnan IqbalUniversity of Agriculture Faisalabad1
Nurma Yunita IndriyantiSebelas Maret University1
Youlanda Jesiva AlbaSebelas Maret University1
Suwiji LestariSebelas Maret University1
Hamzah FansuriInstitut Teknologi Sepuluh Nopember1
Hadi NurUniversity of Technology Malaysia1
Zainab RamliUniversity of Technology Malaysia1
Ratna EdiatiInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Physicochemical Characteristics of Titania Particles Synthesized with Gelatin as a Template Before and After Regeneration and Their Performance in Photocatalytic Methylene Blue</dc:title>
	<dc:creator>Ulfa, Maria</dc:creator>
	<dc:creator>Pangestuti, Indriyani</dc:creator>
	<dc:creator>Anggreani, Cindy Nur</dc:creator>
	<dc:subject xml:lang="en-US">Titania; photocatalyst; methylene blue; Physicochemical Characteristics; gelatin template</dc:subject>
	<dc:description xml:lang="en-US">TiO2 material has an important position in the processing of methylene blue waste because it is economical, has abundant polymorphs, high sustainability and supports green chemistry applications. Mesoporous TiO2 is a porous material that has higher effectiveness than other TiO2 because the pore structure has a large diameter at the nano scale (2-50 nm) with a regular shape so that the surface area and pore volume are greater than the average for other TiO2. The synthesis of mesopore TiO2 material has so far used the sol-gel route with synthetic pore directing agents such as P123 which can be replaced with gelatin as a cheaper and safer pore directing agent with high sustainability and abundance. Based on the description above, this research aims to photodegrade methylene blue using mesoporous TiO2 (m-TiO2) nanoparticles which were prepared by the sol–gel method using gelatin and P123 as template. X-ray diffraction (XRD), scanning electron microscopy (SEM), Electron dispersive X-Ray (EDX), and UV–vis spectroscopy techniques were used to characterize the samples. Photocatalytic activities of samples for methylene blue degradation were investigated. The catalyst before and after regeneration will be studied so that the effect of regeneration on the results of methylene blue photocatalysis with m-TiO2 can be determined. XRD results confirmed the formation of the anatase and rutile phase for the TiO2 nanoparticles, with crystallite sizes larger after regeneration in the range of 9–21 nm. The large particle size was after regeneration due to the promotion by high temperature treatment. TiO2 nanoparticles showed the best photocatalytic activity on the first use to 91% and remained stable after four cycles with photodegradation efficiency up to 76% based on the measured UV-Vis spectroscopy. TiO2 as synthesis could be the best candidate for catalyst with the high performance after multicycle regeneration. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).</dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:date>2024-08-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/20138</dc:identifier>
	<dc:identifier>10.9767/bcrec.20138</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2024: BCREC Volume 19 Issue 2 Year 2024 (August 2024); 242-251</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/20138/9700</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20138/5162</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20138/5163</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20138/5164</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 by Authors, Published by BCREC Publishing Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>