Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Investigation on the Hydrothermal Condition in Synthesis of Active Matrix from Metakaolin: Physicochemical Properties and Intrinsic Cracking Activities

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2024) · hlm. 455–469

DOI
10.9767/bcrec.20181
ISSN
1978-2993
Terbit
2024-10-30
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The current trends in research and development of FCC catalyst is focused on the formulation of active matrices that serve as pre-crackers, with the objective of reducing the diffusional resistance of the longer chain hydrocarbon molecule in the feed. In this study, an aluminosilicate active matrix was synthesised from metakaolin using hydrothermal method. The experimental variables that were varied were hydrothermal temperature, in the range of 80 to 110 °C, and hydrothermal time, in the range of 12 to 72 hours, to investigate the best conditions for synthesising the active matrix. Subsequently, the active matrix was subjected to a series of analyses, including X-ray fluorescence, X-ray diffraction, N2 physisorption, NH3-temperature programmed desorption, Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetry, with the objective of determining its composition, crystal characteristics, surface characteristics, acidity, functional groups, material structure, and thermal characteristics. Additionally, the active matrix was tested for its intrinsic cracking activity using the micro activity test (MAT). The results indicate that the best temperature for hydrothermal synthesis of the active matrix is 80 °C. The active matrix synthesised with a heating time of 24 hours demonstrated the highest light cycle oil yield, reaching 38.9 wt%. Meanwhile, the active matrix synthesised at 48 hours exhibited the most favourable characteristics, with a specific surface area of 144.23 m2/g and a pore volume of 0.9933 cm3/g, as well as the highest cracking conversion of 70.0 wt%. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 131 tautan kepenulisan bersama · 52 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Pertamina (Indonesia)
  • Universitas Bung Hatta
  • Universitas Negeri Padang
  • Zhejiang University of Technology
  • Universitas Gadjah Mada
  • IPB University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Subagjo SubagjoBandung Institute of Technology6
Rino R. MuktiBandung Institute of Technology3
Tri Partono AdhiBandung Institute of Technology2
Carolus B. RasrendaAfiliasi tidak diketahui2
Oki MurazaPertamina (Indonesia)2
Wawan RustyawanPertamina (Indonesia)2
Ismal GamarPertamina (Indonesia)2
Nadya NurdiniBandung Institute of Technology2
Maria UlfahIPB University2
Pasymi PasymiBandung Institute of Technology2
Amelia AmirUniversitas Bung Hatta2
Ulung Muhammad SutopoUniversitas Bung Hatta2
Burmawi BurmawiUniversitas Bung Hatta2
Heri PrabowoUniversitas Negeri Padang1
Arif AlgifariUniversitas Negeri Padang1
Herri SusantoBandung Institute of Technology1
Joko WaluyoSebelas Maret University1
Petric Marc RuyaBandung Institute of Technology1
Dwi HantokoZhejiang University of Technology1
Jenny RizkianaBandung Institute of Technology1
Mi YanZhejiang University of Technology1
Tjandra SetiadiBandung Institute of Technology1
Made Tri Ari Penia KresnowatiBandung Institute of Technology1
Ibnu Maulana HidayatullahBandung Institute of Technology1
I Gusti Bagus Ngurah MakertiharthaBandung Institute of Technology1
Azizah NabilahBandung Institute of Technology1
Hanief AuliaBandung Institute of Technology1
Kuwat TriyanaAfiliasi tidak diketahui1
Muhamad Nasrudin ManafAfiliasi tidak diketahui1
Farah RahmaIPB University1
Ahmad KusumaatmajaUniversitas Gadjah Mada1
Muchammad YunusUniversitas Airlangga1
Shiddiq Nur HidayatUniversitas Gadjah Mada1
Setyo Yanus SasongkoBandung Institute of Technology1
Afif SyaifuddinAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Investigation on the Hydrothermal Condition in Synthesis of Active Matrix from Metakaolin: Physicochemical Properties and Intrinsic Cracking Activities</dc:title>
	<dc:creator>Hudaya, Farhansyah Yusuf Putra</dc:creator>
	<dc:creator>Anggaswara, Rezky Oktaviandy</dc:creator>
	<dc:creator>Gunawan, Melia Laniwati</dc:creator>
	<dc:creator>Kadja, Grandprix Thomryes Marth</dc:creator>
	<dc:creator>Makertihartha, I. G. B. N.</dc:creator>
	<dc:subject xml:lang="en-US">Active Matrix; Fluid Catalytic Cracking; Hydrothermal; Metakaolin; Vacuum Gas Oil</dc:subject>
	<dc:description xml:lang="en-US">The current trends in research and development of FCC catalyst is focused on the formulation of active matrices that serve as pre-crackers, with the objective of reducing the diffusional resistance of the longer chain hydrocarbon molecule in the feed. In this study, an aluminosilicate active matrix was synthesised from metakaolin using hydrothermal method. The experimental variables that were varied were hydrothermal temperature, in the range of 80 to 110 °C, and hydrothermal time, in the range of 12 to 72 hours, to investigate the best conditions for synthesising the active matrix. Subsequently, the active matrix was subjected to a series of analyses, including X-ray fluorescence, X-ray diffraction, N2 physisorption, NH3-temperature programmed desorption, Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetry, with the objective of determining its composition, crystal characteristics, surface characteristics, acidity, functional groups, material structure, and thermal characteristics. Additionally, the active matrix was tested for its intrinsic cracking activity using the micro activity test (MAT). The results indicate that the best temperature for hydrothermal synthesis of the active matrix is 80 °C. The active matrix synthesised with a heating time of 24 hours demonstrated the highest light cycle oil yield, reaching 38.9 wt%. Meanwhile, the active matrix synthesised at 48 hours exhibited the most favourable characteristics, with a specific surface area of 144.23 m2/g and a pore volume of 0.9933 cm3/g, as well as the highest cracking conversion of 70.0 wt%. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).</dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:date>2024-10-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/20181</dc:identifier>
	<dc:identifier>10.9767/bcrec.20181</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2024: BCREC Volume 19 Issue 3 Year 2024 (October 2024); 455-469</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/20181/9724</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20181/5248</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20181/5249</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20181/5253</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20181/5282</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 by Authors, Published by BCREC Publishing Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>