Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

One-Step Hydrothermal Synthesis of TiO2 Nanotubes and Photodegradation Activity towards Diazinon

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2023) · hlm. 713–723

DOI
10.9767/bcrec.20056
ISSN
1978-2993
Terbit
2023-12-11
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The study aimed to analyze how variations in TiO2/NaOH mole ratio, stirring time, and washing pH affect the formation process of TiO2 nanotubes (TNT) through one-stage hydrothermal. TiO2 micro powder was mixed with 10M NaOH with the variation of TiO2/NaOH mole ratio (0.005:1, 0.015:1, and 0.025:1). The hydrothermal process was then conducted at 130 ℃ in an autoclave for 24 h with stirring time intervals of 10, 15, and 20 minutes/h. The samples underwent 1 M HCl washing to produce diverse pH variations (pH = 2, pH = 3, and pH = 4). Characterization of the synthesized TNT was conducted using SEM, TEM, XRD, SAA, and UV-Vis DRS. After analysis of the micrographs revealed the fiber shape of the particles, it was noted that TNT particle size increased due to smaller mole ratio variation, longer stirring, and lower pH. The synthesized TNT featured a tubular morphology with an inner diameter of 3.30 nm, an outer diameter of 6.15 nm, and a wall thickness of 1.64 nm. The increase in sodium titanate content of the sample results in an increase in surface area. Additionally, small pore size contributes towards an increase in both surface area and total pore size. The best result of the TNT photocatalytic test against diazinon can be observed in the fifth sample with a mole ratio of 0.025:1, stirring time of 20 minutes/h, and washing pH of 3. With an irradiation time of 210 min, diazinon degradation reached 90%. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kata kunci

Jaringan kolaborasi para penulis

12 penulis · 36 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Jember
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Helmy Ahmad ZakariaUniversitas Jember4
Sutisna SutisnaUniversitas Jember4
Nida AndrianaUniversitas Jember1
Bambang PiluhartoUniversitas Jember1
Zulfikar ZulfikarUniversitas Jember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">One-Step Hydrothermal Synthesis of TiO2 Nanotubes and Photodegradation Activity towards Diazinon</dc:title>
	<dc:creator>Haryati, Tanti</dc:creator>
	<dc:creator>Diana, Alvina Nur</dc:creator>
	<dc:creator>Sofiyah, Ovy</dc:creator>
	<dc:creator>Nelumbium, Tusiana Putri</dc:creator>
	<dc:creator>Andarini, Novita</dc:creator>
	<dc:creator>Sulistiyo, Yudi Aris</dc:creator>
	<dc:creator>Suwardiyanto, Suwardiyanto</dc:creator>
	<dc:subject xml:lang="en-US">TiO2 Nanotubes (TNT); Stirring Time; Mole Ratio; Washing pH; Photodegradation; Diazinon</dc:subject>
	<dc:description xml:lang="en-US">The study aimed to analyze how variations in TiO2/NaOH mole ratio, stirring time, and washing pH affect the formation process of TiO2 nanotubes (TNT) through one-stage hydrothermal. TiO2 micro powder was mixed with 10M NaOH with the variation of TiO2/NaOH mole ratio (0.005:1, 0.015:1, and 0.025:1). The hydrothermal process was then conducted at 130 ℃ in an autoclave for 24 h with stirring time intervals of 10, 15, and 20 minutes/h. The samples underwent 1 M HCl washing to produce diverse pH variations (pH = 2, pH = 3, and pH = 4). Characterization of the synthesized TNT was conducted using SEM, TEM, XRD, SAA, and UV-Vis DRS. After analysis of the micrographs revealed the fiber shape of the particles, it was noted that TNT particle size increased due to smaller mole ratio variation, longer stirring, and lower pH. The synthesized TNT featured a tubular morphology with an inner diameter of 3.30 nm, an outer diameter of 6.15 nm, and a wall thickness of 1.64 nm. The increase in sodium titanate content of the sample results in an increase in surface area. Additionally, small pore size contributes towards an increase in both surface area and total pore size. The best result of the TNT photocatalytic test against diazinon can be observed in the fifth sample with a mole ratio of 0.025:1, stirring time of 20 minutes/h, and washing pH of 3. With an irradiation time of 210 min, diazinon degradation reached 90%. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). </dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:date>2023-12-11</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/20056</dc:identifier>
	<dc:identifier>10.9767/bcrec.20056</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2023: BCREC Volume 18 Issue 4 Year 2023 (December 2023); 713-723</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/20056/9662</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20056/5041</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20056/5042</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20056/5043</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>