Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The Effect of Variations in Calcination Temperature on the Character of ZnO and ZnO/Mopl-CTAB in Degrading Methyl Orange

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2023) · hlm. 268–284

DOI
10.9767/bcrec.18305
ISSN
1978-2993
Terbit
2023-08-20
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Medan orange peel (Mopl), which has been modified using cetyltrimethylammonium bromide (CTAB), has the potential to adsorb methyl orange (MO), and thus it can be used as a supporting material for ZnO. The ZnO is a photocatalytic material that is environmentally friendly, inexpensive, non-toxic, and has a wide band gap value. This study aims to determine the effect of calcination temperature on ZnO and ZnO characteristics due to modification using Mopl-CTAB and its effect on the degradation of MO. This research was carried out by synthesizing ZnO and ZnO/Mopl-CTAB materials using impregnation method and varying the calcination temperatures at 150, 250, 350, and 450 °C. The solid material powder obtained was characterized by using Scanning Electron Microscope-Energy Dispersive X-ray (SEM-EDX), Brunauer–Emmett–Teller (BET), Fourier Transform Infra Red (FTIR), X-ray Diffraction (XRD), and Diffuse Reflectance Spectroscopy (DRS). Based on the results of the characterization, greater calcination temperature can affect the characteristics of the photocatalyst, including its morphology, functional groups, crystal structure, crystal lattice, crystallinity, surface area, pore size, pore volume, and energy band gap. The MO photodegradation activity test using the synthesized material was conducted under dark and light conditions. The results of the test revealed that the best or optimum material to be used in degrading MO is a calcined material at 450 °C under light conditions. ZnO material using Mopl-CTAB is better in degrading ZnO/Mopl-CTAB 450 °C than ZnO 450 °C. This study found that ZnO material using Mopl-CTAB had a percent removal of 78% in 50 min, while ZnO 450 °C only had a percent removal of 53% in 40 min. The reaction kinetics in dark and light conditions follow the pseudo-second-order kinetic model. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kata kunci

Jaringan kolaborasi para penulis

37 penulis · 121 tautan kepenulisan bersama · 37 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Universitas Islam Kadiri
  • Jenderal Soedirman University
  • Andalas University
  • University of Technology Malaysia
  • Sumatera Institute of Technology
  • Bandung Institute of Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Paundra Rizky PratamaInstitut Teknologi Sepuluh Nopember1
Felysia IsmanInstitut Teknologi Sepuluh Nopember1
Talitha Fitra FirdausyaAfiliasi tidak diketahui1
Yulfi ZetraInstitut Teknologi Sepuluh Nopember1
R. Y. Perry BurhanInstitut Teknologi Sepuluh Nopember1
Yunita Alfiyati FirdausaInstitut Teknologi Sepuluh Nopember1
Nirmala Puteri BatariInstitut Teknologi Sepuluh Nopember1
Rizka Berliana PutriInstitut Teknologi Sepuluh Nopember1
Hamzah FansuriInstitut Teknologi Sepuluh Nopember1
Zeni RahmawatiInstitut Teknologi Sepuluh Nopember1
Romario AbdullahInstitut Teknologi Sepuluh Nopember1
Dinia AstiraInstitut Teknologi Sepuluh Nopember1
Utari ZulfianiInstitut Teknologi Sepuluh Nopember1
Alvin Rahmad WidyantoInstitut Teknologi Sepuluh Nopember1
Triyanda GunawanInstitut Teknologi Sepuluh Nopember1
Mohd Hafiz Dzarfan OthmanUniversity of Technology Malaysia1
Sarmoko SarmokoSumatera Institute of Technology1
Dicky Rizky FebrianJenderal Soedirman University1
Joko SetyonoJenderal Soedirman University1
Muhamad Salman FarezaJenderal Soedirman University1
Nur Amalia ChoironiJenderal Soedirman University1
Atthar Luqman IvansyahBandung Institute of Technology1
Yulia Eka PutriAndalas University1
Diana Vanda WelliaAndalas University1
Evan AttalarioAndalas University1
Resha Mutia RahmaInstitut Teknologi Sepuluh Nopember1
Yuniar Ponco PranantoAfiliasi tidak diketahui1
Mohammad Misbah KhunurUniversity of Brawijaya1
Dini Tri WahyuniAfiliasi tidak diketahui1
Yoga Rizky NataAfiliasi tidak diketahui1
Efiria RiskahAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Variations in Calcination Temperature on the Character of ZnO and ZnO/Mopl-CTAB in Degrading Methyl Orange</dc:title>
	<dc:creator>Rosanti, Aulia Dewi</dc:creator>
	<dc:creator>Hidayat, Fahmi</dc:creator>
	<dc:creator>Kusumawati, Yuly</dc:creator>
	<dc:creator>Fadlan, Arif</dc:creator>
	<dc:creator>Shobirin, Rizky Arief</dc:creator>
	<dc:creator>Wijaya, Fanni Kurnia</dc:creator>
	<dc:subject xml:lang="en-US">ZnO; ZnO/Mopl-CTAB; Calcination Temperature, Methyl Orange, Photodegradation</dc:subject>
	<dc:description xml:lang="en-US">Medan orange peel (Mopl), which has been modified using cetyltrimethylammonium bromide (CTAB), has the potential to adsorb methyl orange (MO), and thus it can be used as a supporting material for ZnO. The ZnO is a photocatalytic material that is environmentally friendly, inexpensive, non-toxic, and has a wide band gap value. This study aims to determine the effect of calcination temperature on ZnO and ZnO characteristics due to modification using Mopl-CTAB and its effect on the degradation of MO. This research was carried out by synthesizing ZnO and ZnO/Mopl-CTAB materials using impregnation method and varying the calcination temperatures at 150, 250, 350, and 450 °C. The solid material powder obtained was characterized by using Scanning Electron Microscope-Energy Dispersive X-ray (SEM-EDX), Brunauer–Emmett–Teller (BET), Fourier Transform Infra Red (FTIR), X-ray Diffraction (XRD), and Diffuse Reflectance Spectroscopy (DRS). Based on the results of the characterization, greater calcination temperature can affect the characteristics of the photocatalyst, including its morphology, functional groups, crystal structure, crystal lattice, crystallinity, surface area, pore size, pore volume, and energy band gap. The MO photodegradation activity test using the synthesized material was conducted under dark and light conditions. The results of the test revealed that the best or optimum material to be used in degrading MO is a calcined material at 450 °C under light conditions. ZnO material using Mopl-CTAB is better in degrading ZnO/Mopl-CTAB 450 °C than ZnO 450 °C. This study found that ZnO material using Mopl-CTAB  had a percent removal of 78% in 50 min, while ZnO 450 °C only had a percent removal of 53% in 40 min. The reaction kinetics in dark and light conditions follow the pseudo-second-order kinetic model. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). </dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:date>2023-08-20</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/18305</dc:identifier>
	<dc:identifier>10.9767/bcrec.18305</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2023: BCREC Volume 18 Issue 2 Year 2023 (August 2023); 268-284</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/18305/9230</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/18305/4588</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/18305/4589</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/18305/4590</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/18305/4591</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>