Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Modification Strategies of Copper Molybdate-based Photocatalysts for Degradation of Organic Compounds in Wastewater: A Mini Review

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2026) · hlm. 244–261

DOI
10.9767/bcrec.20627
ISSN
1978-2993
Terbit
2026-08-30
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Visible-light photocatalysis has emerged as a sustainable tertiary‐treatment option. Within this arena, copper molybdate (CuMoO4) is attractive because of its narrow bandgap enables direct solar harvesting while relying on earth-abundant elements. Yet pristine CuMoO4 suffers from low surface area (< 10 m2/g), rapid electron-hole recombination and Cu2+ photocorrosion, which curb quantum yields and raise secondary-pollution concerns. This mini review critically synthesizes research published between 2019 and 2025 on strategies devised to surmount these limitations. Four major areas are surveyed: (i) morphology engineering that multiplies active-site density and deepens light scattering; (ii) plasmonic or single-atom noble-metal decoration that extends spectral response and accelerates interfacial charge separation via localized surface plasmon resonance; (iii) band-gap and defect modulation through doping or oxygen-vacancy creation, narrowing band gap and introducing long-lived trapping states, and (iv) construction of p-n heterojunctions (e.g., ZnO/CuMoO4, graphitic carbon nitride/copper molybdate (g-C3N4/CuMoO4) that yield order-of-magnitude rate enhancements by spatially separating redox half-reactions. The synthesis approaches, from hydrothermal and co-precipitation to thermal-decomposition and solid-state reactions directly influence crystallinity, morphology and defect chemistry, with optimal hydrothermal conditions (180 oC, 10 h) producing high-purity α-CuMoO4 microspheres and oxygen-vacancy-rich Cu-rich phases delivering up to a 0.5 eV bandgap reduction. Emphasis is placed on correlating structural descriptors with pollutant-mineralization kinetics and on emerging green-synthesis trends. Remaining challenges and research priorities including stability against Cu leaching, scalable fabrication and in-situ mechanistic probes are highlighted to guide future catalyst design. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 69 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • International Islamic University Malaysia
  • Universiti Teknologi Brunei
  • University of Technology Malaysia
  • Universiti Sains Malaysia
  • DRB-HICOM University of Automotive Malaysia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Md. Maksudur Rahman KhanUniversiti Malaysia Pahang Al-Sultan Abdullah3
Kaykobad Md. Rezaul KarimUniversiti Malaysia Pahang Al-Sultan Abdullah3
Herma Dina SetiabudiUniversiti Malaysia Pahang Al-Sultan Abdullah2
Nur Salsabila KamarudinUniversiti Malaysia Pahang Al-Sultan Abdullah1
Nurfatehah Wahyuny Che JusohUniversity of Technology Malaysia1
Nur Farhana JaafarUniversiti Sains Malaysia1
Nuramira Fateha SukorUniversiti Malaysia Pahang Al-Sultan Abdullah1
Rosalyza HasanUniversiti Malaysia Pahang Al-Sultan Abdullah1
Chi Cheng ChongUniversiti Malaysia Pahang Al-Sultan Abdullah1
Nur Aida Farihin AhliyasahUniversiti Malaysia Pahang Al-Sultan Abdullah1
Nor Khonisah DaudUniversiti Malaysia Pahang Al-Sultan Abdullah1
Nur Aminatulmimi IsmailUniversiti Malaysia Pahang Al-Sultan Abdullah1
Chin Kui ChengUniversiti Malaysia Pahang Al-Sultan Abdullah1
Huei Ruey OngDRB-HICOM University of Automotive Malaysia1
Abu YousufUniversiti Malaysia Pahang Al-Sultan Abdullah1
Siti Shariah GhazaliUniversiti Malaysia Pahang Al-Sultan Abdullah1
Sureena Binti AbdullahUniversiti Malaysia Pahang Al-Sultan Abdullah1
Kem Ley KemUniversiti Malaysia Pahang Al-Sultan Abdullah1
Jun Haslinda ShariffuddinUniversiti Malaysia Pahang Al-Sultan Abdullah1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Modification Strategies of Copper Molybdate-based Photocatalysts for Degradation of Organic Compounds in Wastewater: A Mini Review</dc:title>
	<dc:creator>Abdullah, Hamidah binti</dc:creator>
	<dc:creator>Jusoh, Rohayu binti</dc:creator>
	<dc:creator>Safie, Wahaizad bin</dc:creator>
	<dc:creator>Nasaruddin, Ricca Rahman binti</dc:creator>
	<dc:creator>Khan, Maksudur Rahman</dc:creator>
	<dc:creator>Arifin, Md Noor bin</dc:creator>
	<dc:subject xml:lang="en-US">Visible-light Photocatalysis; Copper Molybdate; Morphology Engineering; Defect Modulation; p-n Heterojunctions</dc:subject>
	<dc:description xml:lang="en-US">Visible-light photocatalysis has emerged as a sustainable tertiary‐treatment option. Within this arena, copper molybdate (CuMoO4) is attractive because of its narrow bandgap enables direct solar harvesting while relying on earth-abundant elements. Yet pristine CuMoO4 suffers from low surface area (&lt; 10 m2/g), rapid electron-hole recombination and Cu2+ photocorrosion, which curb quantum yields and raise secondary-pollution concerns. This mini review critically synthesizes research published between 2019 and 2025 on strategies devised to surmount these limitations. Four major areas are surveyed: (i) morphology engineering that multiplies active-site density and deepens light scattering; (ii) plasmonic or single-atom noble-metal decoration that extends spectral response and accelerates interfacial charge separation via localized surface plasmon resonance; (iii) band-gap and defect modulation through doping or oxygen-vacancy creation, narrowing band gap and introducing long-lived trapping states, and (iv) construction of p-n heterojunctions (e.g., ZnO/CuMoO4, graphitic carbon nitride/copper molybdate (g-C3N4/CuMoO4) that yield order-of-magnitude rate enhancements by spatially separating redox half-reactions. The synthesis approaches, from hydrothermal and co-precipitation to thermal-decomposition and solid-state reactions directly influence crystallinity, morphology and defect chemistry, with optimal hydrothermal conditions (180 oC, 10 h) producing high-purity α-CuMoO4 microspheres and oxygen-vacancy-rich Cu-rich phases delivering up to a 0.5 eV bandgap reduction. Emphasis is placed on correlating structural descriptors with pollutant-mineralization kinetics and on emerging green-synthesis trends. Remaining challenges and research priorities including stability against Cu leaching, scalable fabrication and in-situ mechanistic probes are highlighted to guide future catalyst design. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).</dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:date>2026-08-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/20627</dc:identifier>
	<dc:identifier>10.9767/bcrec.20627</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2026: BCREC Volume 21 Issue 2 Year 2026 (August 2026); 244-261</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/20627/9916</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20627/6184</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20627/6185</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20627/6186</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 by Authors, Published by BCREC Publishing Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>