Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The Effect of Sintering Temperature on the Structural Characteristics, Particle Size, and Photocatalytic Properties of BaTiO3 and Ba0.97Sr0.03TiO3 Nanomaterials

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2027) · hlm. 13–24

DOI
10.9767/bcrec.20841
ISSN
1978-2993
Terbit
2027-04-30
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

BaTiO3 and Ba0.97Sr0.03TiO3 nanomaterials were synthesized by the co-precipitation method and sintered at 900 °C and 1000 °C for 4 hours. This study investigates the effect of 3 mol% Sr substitution and sintering temperature on the crystal structure, functional groups, particle-size distribution, and photocatalytic performance toward methylene blue (MB) degradation. X-ray diffraction (XRD) showed tetragonal perovskite BaTiO3 with weak secondary reflections, more numerous in the Sr-containing samples, and no resolved shift of the (101) reflection after Sr substitution. The crystallite size estimated from XRD was 30-33 nm (Scherrer plot) and 37-46 nm (unsplit (111) reflection), whereas dynamic light scattering (DLS) gave Z-average hydrodynamic diameters of about 250-440 nm, indicating agglomeration of the crystallites; the Sr-containing powder was smaller only at 900 °C. FTIR spectra showed the characteristic Ti-O (Ba-Ti-O) stretching band at 565-576 cm-1. Photocatalytic activity was evaluated using 10 ppm MB solution under UV irradiation. The apparent MB removal, calculated from the absorbance at 664 nm, was ≈34% and ≈24% for Ba0.97Sr0.03TiO3 sintered at 900 °C and 1000 °C, compared with ≈28% and ≈0% for undoped BaTiO3; thus Sr substitution increased, and the higher sintering temperature decreased, the apparent removal. The origin of this behavior was not directly characterized and requires further study. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kata kunci

Jaringan kolaborasi para penulis

27 penulis · 92 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • Sekolah Tinggi Teknik Wiworotomo Purwokerto
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Fahru NurosyidSebelas Maret University4
Risa SuryanaSebelas Maret University2
Isma Alvia NitaSebelas Maret University1
S SetyowatiAfiliasi tidak diketahui1
Ari Handono RamelanSebelas Maret University1
Agus SupriyantoSebelas Maret University1
Dianisa Khoirum SandiSebelas Maret University1
Anif JamaludinSebelas Maret University1
Sistha Ridha AlfidharistiSebelas Maret University1
Novinda Hary MegasariSebelas Maret University1
Suharno SuharnoSebelas Maret University1
Utari UtariAfiliasi tidak diketahui1
Nurdiyantoro Putra PrasetyaSebelas Maret University1
Budi PurnamaSebelas Maret University1
Riyatun RiyatunSebelas Maret University1
Nuryani NuryaniSebelas Maret University1
Ramadona RahmawatiSebelas Maret University1
Adiana MusadewiSebelas Maret University1
Sri BudiawantiSebelas Maret University1
Dwi Teguh RahardjoSebelas Maret University1
Husnah RofikoSebelas Maret University1
Desita Suci PangestiSebelas Maret University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Effect of Sintering Temperature on the Structural Characteristics, Particle Size, and Photocatalytic Properties of BaTiO3 and Ba0.97Sr0.03TiO3 Nanomaterials</dc:title>
	<dc:creator>Agustina, Elvinda Bendra</dc:creator>
	<dc:creator>Yuniarto, Abdul Hakim Prima</dc:creator>
	<dc:creator>Dewi, Alif Tiana</dc:creator>
	<dc:creator>Iriani, Yofentina</dc:creator>
	<dc:creator>Andini, Trya</dc:creator>
	<dc:subject xml:lang="en-US">Barium titanate; Strontium doping; Co-precipitation; Sintering temperature; Photocatalyst; Methylene blue</dc:subject>
	<dc:description xml:lang="en-US">BaTiO3 and Ba0.97Sr0.03TiO3 nanomaterials were synthesized by the co-precipitation method and sintered at 900 °C and 1000 °C for 4 hours. This study investigates the effect of 3 mol% Sr substitution and sintering temperature on the crystal structure, functional groups, particle-size distribution, and photocatalytic performance toward methylene blue (MB) degradation. X-ray diffraction (XRD) showed tetragonal perovskite BaTiO3 with weak secondary reflections, more numerous in the Sr-containing samples, and no resolved shift of the (101) reflection after Sr substitution. The crystallite size estimated from XRD was 30-33 nm (Scherrer plot) and 37-46 nm (unsplit (111) reflection), whereas dynamic light scattering (DLS) gave Z-average hydrodynamic diameters of about 250-440 nm, indicating agglomeration of the crystallites; the Sr-containing powder was smaller only at 900 °C. FTIR spectra showed the characteristic Ti-O (Ba-Ti-O) stretching band at 565-576 cm-1. Photocatalytic activity was evaluated using 10 ppm MB solution under UV irradiation. The apparent MB removal, calculated from the absorbance at 664 nm, was ≈34% and ≈24% for Ba0.97Sr0.03TiO3 sintered at 900 °C and 1000 °C, compared with ≈28% and ≈0% for undoped BaTiO3; thus Sr substitution increased, and the higher sintering temperature decreased, the apparent removal. The origin of this behavior was not directly characterized and requires further study. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).</dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:date>2027-04-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/20841</dc:identifier>
	<dc:identifier>10.9767/bcrec.20841</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2027: BCREC Volume 22 Issue 1 Year 2027 (April 2027) (Issue in Progress); 13-24</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/20841/10020</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20841/6630</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2027 by Authors, Published by BCREC Publishing Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>