Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Hydrogen Production via Glycerol Dry Reforming over La-Ni/Al2O3 Catalyst

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2013) · hlm. 160–166

DOI
10.9767/bcrec.8.2.4874.160-166
ISSN
1978-2993
Terbit
2013-12-30
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Glycerol (a bio-waste generated from biodiesel production) has been touted as a promising bio-syngas precursor via reforming route. Previous studies have indicated that carbon deposition is the major performance-limiting factor for nickel (Ni) catalyst during glycerol steam reforming. In the current paper, dry (CO2)-reforming of glycerol, a new reforming route was carried out over alumina (Al2O3)-supported non-promoted and lanthanum-promoted Ni catalysts. Both sets of catalysts were synthesized via wet co-impregnation procedure. The physicochemical characterization of the catalyst showed that the promoted catalyst possessed smaller metal crystallite size, hence higher metal dispersion compared to the virgin Ni/Al2O3 catalyst. This was also corroborated by the surface images captured by the FESEM analysis. In addition, BET surface area measurement gave 92.05m²/g for non-promoted Ni catalyst whilst promoted catalysts showed an average of 1 to 6% improvement depending on the La loading. Reaction studies at 873 K showed that glycerol dry reforming successfully produced H2 with glycerol conversion and H2 yield that peaked at 9.7% and 25% respectively over 2wt% La content. The optimum catalytic performance by 2%La-Ni/Al2O3 can be attributed to the larger BET surface area and smaller crystallite size that ensured accessibility of active catalytic sites. © 2013 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)

Kata kunci

Jaringan kolaborasi para penulis

26 penulis · 68 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Tunku Abdul Rahman University of Management and Technology
  • DRB-HICOM University of Automotive Malaysia
  • Universiti Teknologi Petronas
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Md. Maksudur Rahman KhanUniversiti Malaysia Pahang Al-Sultan Abdullah4
Bamidele Victor AyodeleUniversiti Malaysia Pahang Al-Sultan Abdullah4
Kah Sing HoUniversiti Malaysia Pahang Al-Sultan Abdullah2
Joanna Jo Ean ChyeUniversiti Malaysia Pahang Al-Sultan Abdullah2
Sim Yee ChinUniversiti Malaysia Pahang Al-Sultan Abdullah2
Mohd Nasir Nor ShahirahUniversiti Malaysia Pahang Al-Sultan Abdullah2
Kim Hoong NgUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mohd Rizauddin DeramanUniversiti Malaysia Pahang Al-Sultan Abdullah1
Chun How AngUniversiti Malaysia Pahang Al-Sultan Abdullah1
Soo Kee ChongUniversiti Malaysia Pahang Al-Sultan Abdullah1
Zi Ying KongUniversiti Malaysia Pahang Al-Sultan Abdullah1
M. Anwar HossainUniversiti Malaysia Pahang Al-Sultan Abdullah1
Hamidah AbdullahUniversiti Malaysia Pahang Al-Sultan Abdullah1
Kaykobad Md. Rezaul KarimUniversiti Malaysia Pahang Al-Sultan Abdullah1
Huei Ruey OngDRB-HICOM University of Automotive Malaysia1
Abu YousufUniversiti Malaysia Pahang Al-Sultan Abdullah1
Yik Siang PangTunku Abdul Rahman University of Management and Technology1
Woon Phui LawUniversiti Malaysia Pahang Al-Sultan Abdullah1
Kang Qin PungTunku Abdul Rahman University of Management and Technology1
Mohammad Tazli AzizanUniversiti Teknologi Petronas1
Sumaiya Zainal AbidinUniversiti Malaysia Pahang Al-Sultan Abdullah1
Norazimah HarunUniversiti Malaysia Pahang Al-Sultan Abdullah1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Hydrogen Production via Glycerol Dry Reforming over La-Ni/Al2O3 Catalyst</dc:title>
	<dc:creator>Siew, Kah Weng</dc:creator>
	<dc:creator>Lee, Hua Chyn</dc:creator>
	<dc:creator>Gimbun, Jolius</dc:creator>
	<dc:creator>Cheng, Chin Kui</dc:creator>
	<dc:subject xml:lang="en-US">Biofuel; Dry Reforming; Glycerol; Hydrogen</dc:subject>
	<dc:description xml:lang="en-US">Glycerol (a bio-waste generated from biodiesel production) has been touted as a promising bio-syngas precursor via reforming route. Previous studies have indicated that carbon deposition is the major performance-limiting factor for nickel (Ni) catalyst during glycerol steam reforming. In the current paper, dry (CO2)-reforming of glycerol, a new reforming route was carried out over alumina (Al2O3)-supported non-promoted and lanthanum-promoted Ni catalysts. Both sets of catalysts were synthesized via wet co-impregnation procedure. The physicochemical characterization of the catalyst showed that the promoted catalyst possessed smaller metal crystallite size, hence higher metal dispersion compared to the virgin Ni/Al2O3 catalyst. This was also corroborated by the surface images captured by the FESEM analysis. In addition, BET surface area measurement gave 92.05m²/g for non-promoted Ni catalyst whilst promoted catalysts showed an average of 1 to 6% improvement depending on the La loading. Reaction studies at 873 K showed that glycerol dry reforming successfully produced H2 with glycerol conversion and H2 yield that peaked at 9.7% and 25% respectively over 2wt% La content. The optimum catalytic performance by 2%La-Ni/Al2O3 can be attributed to the larger BET surface area and smaller crystallite size that ensured accessibility of active catalytic sites. © 2013 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)</dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:contributor xml:lang="en-US">Ministry of Higher Education Malaysia|MTUN-CoE research grant with vot. no. RDU121216</dc:contributor>
	<dc:date>2013-12-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/19501</dc:identifier>
	<dc:identifier>10.9767/bcrec.8.2.4874.160-166</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2013: BCREC Volume 8 Issue 2 Year 2013 (December 2013); 160-166</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/19501/9399</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2013 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>