Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Synthesis of Polyesters from AB Tung Oil-based Polyol Monomers Through Step-growth Polymerization Reactions

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2025) · hlm. 307–317

DOI
10.9767/bcrec.20338
ISSN
1978-2993
Terbit
2025-08-30
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this study, polyesters synthesized from AB Tung oil-based polyols (TOBPs) monomers via step-growth polymerization reactions. TOBPs are polyols made from Tung oil through a series of hydroxylation and epoxidation procedures. They have hydroxyl (OH) and carboxylic (COOH) functional groups. The polymerization was performed in a three-necked round-bottomed flask (250 mL) equipped with a magnetic stirrer, thermometer, and condenser. It is placed in an oil bath to maintain the reaction temperature. The generated moisture was collected using a vacuum pump. In the meantime, oxygen is being expelled from the reactor by nitrogen. The temperature and stirring speed were kept constant for 6 hours throughout the operation. According to the experiment, 150°C was the ideal temperature for polyesterification. The reaction rate constant rose by 4.73 to 19.99% with the addition of the p-TSA catalyst. The [COOH] and [OH] models were nearly identical to the experimental results, demonstrating the viability of the proposed kinetic model. According to the calculation's findings, polymerization without a catalyst yielded activation energies (Ea) and collision factors (A) of 27.2215 kJ/mol and 16.2965 g.mmol-1.min-1, respectively. Then, polymerization with catalyst decreased Ea and A values, which were around 26.4681 kJ/mol and 14.6746 g.mmol-1.min-1. Copyright © 2025 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 124 tautan kepenulisan bersama · 61 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Universitas Halu Oleo
  • Institut Agama Islam Negeri Kendari
  • Universitas Ahmad Dahlan
  • State University of Semarang
  • National Nuclear Energy Agency of Indonesia
  • Muhammadiyah University of Surakarta
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Eko Agus SuyonoUniversitas Gadjah Mada6
Siti JamilatunUniversitas Ahmad Dahlan6
Hadiyanto HadiyantoDiponegoro University4
Wusana Agung WibowoSebelas Maret University4
Rochim Bakti CahyonoUniversitas Gadjah Mada4
Ratna Dewi KusumaningtyasState University of Semarang3
Muhammad Mufti AzisUniversitas Gadjah Mada3
Panut MulyonoUniversitas Gadjah Mada3
Suryo PurwonoUniversitas Gadjah Mada3
Ulfah Juniarti SiregarIPB University2
Lucia Tri SuwantiUniversitas Airlangga2
Tia ErfiantiUniversitas Gadjah Mada2
Meutia Ermina ToifUniversitas Gadjah Mada2
Muslikhin HidayatUniversitas Gadjah Mada2
Lestari DaswanInstitut Agama Islam Negeri Kendari1
Makkulau MakkulauUniversitas Halu Oleo1
Baharuddin BaharuddinAfiliasi tidak diketahui1
Andi Tenri AmpaUniversitas Halu Oleo1
La Ode SaidiUniversitas Halu Oleo1
Amirullah AmirullahState University of Makassar1
M SetiawanInstitut Agama Islam Negeri Kendari1
Nina ApriyantiInstitut Agama Islam Negeri Kendari1
Idul SetiawanInstitut Agama Islam Negeri Kendari1
Riski Amalia MadiUniversitas Halu Oleo1
Yusuf YusufUniversitas Halu Oleo1
Juharsah JuharsahUniversitas Halu Oleo1
Hastuti HastutiUniversitas Halu Oleo1
Wahyuniati HamidUniversitas Halu Oleo1
Yeni ElisthatianaUniversitas Ahmad Dahlan1
Siti Nurhalizatul AiniUniversitas Ahmad Dahlan1
Ilham MufandiKhon Kaen University1
Kris Tri BasukiNational Nuclear Energy Agency of Indonesia1
Deni SwantomoNational Nuclear Energy Agency of Indonesia1
Rahman SudiyoUniversitas Gadjah Mada1
Imam Novrizal AjiState University of Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Synthesis of Polyesters from AB Tung Oil-based Polyol Monomers Through Step-growth Polymerization Reactions</dc:title>
	<dc:creator>Budiyati, Eni</dc:creator>
	<dc:creator>Hartini, Hartini</dc:creator>
	<dc:creator>Rochmadi, Rochmadi</dc:creator>
	<dc:creator>Budiman, Arief</dc:creator>
	<dc:creator>Budhijanto, Budhijanto</dc:creator>
	<dc:subject xml:lang="en-US">Kinetics; Polyester; Polymerization; Tung oil-based polyols</dc:subject>
	<dc:description xml:lang="en-US">In this study, polyesters synthesized from AB Tung oil-based polyols (TOBPs) monomers via step-growth polymerization reactions. TOBPs are polyols made from Tung oil through a series of hydroxylation and epoxidation procedures. They have hydroxyl (OH) and carboxylic (COOH) functional groups. The polymerization was performed in a three-necked round-bottomed flask (250 mL) equipped with a magnetic stirrer, thermometer, and condenser. It is placed in an oil bath to maintain the reaction temperature. The generated moisture was collected using a vacuum pump. In the meantime, oxygen is being expelled from the reactor by nitrogen. The temperature and stirring speed were kept constant for 6 hours throughout the operation. According to the experiment, 150°C was the ideal temperature for polyesterification. The reaction rate constant rose by 4.73 to 19.99% with the addition of the p-TSA catalyst. The [COOH] and [OH] models were nearly identical to the experimental results, demonstrating the viability of the proposed kinetic model. According to the calculation's findings, polymerization without a catalyst yielded activation energies (Ea) and collision factors (A) of 27.2215 kJ/mol and 16.2965 g.mmol-1.min-1, respectively. Then, polymerization with catalyst decreased Ea and A values, which were around 26.4681 kJ/mol and 14.6746 g.mmol-1.min-1. Copyright © 2025 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).</dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:date>2025-08-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/20338</dc:identifier>
	<dc:identifier>10.9767/bcrec.20338</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2025: BCREC Volume 20 Issue 2 Year 2025 (August 2025); 307-317</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/20338/9809</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20338/5601</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20338/5602</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20338/5603</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 by Authors, Published by BCREC Publishing Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>