Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A Performance Study of Home-Made Co-Immobilized Lipase from Mucor miehei in Polyurethane Foam on The Hydrolysis of Coconut Oil to Fatty Acid

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2019) · hlm. 391–403

DOI
10.9767/bcrec.14.2.3848.391-403
ISSN
1978-2993
Terbit
2019-08-01
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Bio‐based fatty acids (FAs) produced through hydrolysis of natural oils and fats are promising chemical feedstocks for increasing the economic value of renewable raw materials. In this work, lecithin, gelatin, PEG, and MgCl2 were employed as the co-immobilized material of crude lipase Mucor miehei immobilization on the polyurethane foam (PUF) matrix for hydrolysis of coconut oil to Free Fatty Acid (FFA). The unconventional immobilized technique was used through cross-linking and covalent bond. Single factor analysis and response surface method were utilized to determine the optimum conditions of the hydrolysis reaction. After optimization, co-immobilized lipase was examined for storage stability at a temperature of 4°C and reusability performance. The optimum conditions for coconut oil hydrolysis were obtained on the co-immobilized-PUF ratio, water-oil ratio, and reaction time of 20.17 w/w, 4.45 w/w, and 20 h, respectively. Under these conditions, the acid value as lauric acid enhanced 573% to 3.21 mg KOH/g oil. Storage stability attained through remaining activity on free lipase, PUF-lipase, PUF-co-immobilized-lipase were 9.89%, 42.3%, and 91.88%, respectively. In this study, the application of PUF-co-immobilized lipase in hydrolysis reactions can be reused up to 5 times. Characteristics of the addition of co-immobilized lipase have been analyzed using Fourier Transform Infra Red (FTIR) and Scanning Electron Microscope (SEM), showing the presence of functional groups binding and the changes in the surface matrix structure.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 175 tautan kepenulisan bersama · 41 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Universitas Jember
  • University of Surabaya
  • Sriwijaya University
  • Politeknik Negeri Malang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rizki Fitria DarmayantiUniversitas Jember9
Nur FadhilahInstitut Teknologi Sepuluh Nopember8
Hanny F. SangianInstitut Teknologi Sepuluh Nopember6
Tantular NurtonoInstitut Teknologi Sepuluh Nopember5
Setiyo GunawanInstitut Teknologi Sepuluh Nopember4
Candra WijayaInstitut Teknologi Sepuluh Nopember4
Tri WidjajaInstitut Teknologi Sepuluh Nopember4
Lieke RiadiUniversity of Surabaya4
Zakijah IrfinPoliteknik Negeri Malang4
Silvya Yusnica AgnestyInstitut Teknologi Sepuluh Nopember3
Siska Nuri FadilahSriwijaya University3
Urania Noor Lintang PertiwiInstitut Teknologi Sepuluh Nopember2
Tabina Raissa ApolInstitut Teknologi Sepuluh Nopember2
Ika Putri Nikmatur RohmahInstitut Teknologi Sepuluh Nopember2
Istiqomah RahmawatiUniversitas Jember1
Bekti PalupiUniversitas Jember1
Boy Arief FachriUniversitas Jember1
Felix Arie SetiawanUniversitas Jember1
Helda Wika AminiUniversitas Jember1
Meta Fitri RizkianaUniversitas Jember1
Atiqa RahmawatiUniversitas Jember1
Ari Diana SusantiUniversitas Jember1
Ditta Kharisma Yolanda PutriUniversitas Jember1
Sukmawati RahmaAfiliasi tidak diketahui1
Junaidi KristianInstitut Teknologi Sepuluh Nopember1
Hellen Kartika DewiInstitut Teknologi Sepuluh Nopember1
Debra Arlin PuspasariInstitut Teknologi Sepuluh Nopember1
Niki EtrulyInstitut Teknologi Sepuluh Nopember1
Dyah SawitriInstitut Teknologi Sepuluh Nopember1
Ari AnggoroAfiliasi tidak diketahui1
Akbarningrum FatmawatiInstitut Teknologi Sepuluh Nopember1
Kamila Adila MuslimInstitut Teknologi Sepuluh Nopember1
Doty Dewi RisantiInstitut Teknologi Sepuluh Nopember1
Ruri Agung WahyuonoInstitut Teknologi Sepuluh Nopember1
Dendy SatrioInstitut Teknologi Sepuluh Nopember1
Achri Isnan KhamilUniversitas Jember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Performance Study of Home-Made Co-Immobilized Lipase from Mucor miehei in Polyurethane Foam on The Hydrolysis of Coconut Oil to Fatty Acid</dc:title>
	<dc:creator>Moentamaria, Dwina</dc:creator>
	<dc:creator>Muharja, Maktum</dc:creator>
	<dc:creator>Widjaja, Tri</dc:creator>
	<dc:creator>Widjaja, Arief</dc:creator>
	<dc:subject xml:lang="en-US">co-immobilized lipase; coconut oil; free fatty acid; polyurethane foam; response surface methodology</dc:subject>
	<dc:description xml:lang="en-US">Bio‐based fatty acids (FAs) produced through hydrolysis of natural oils and fats are promising chemical feedstocks for increasing  the economic value of renewable raw materials. In this work, lecithin, gelatin, PEG, and MgCl2 were employed as the co-immobilized material of crude lipase Mucor miehei immobilization on the polyurethane foam (PUF) matrix for hydrolysis of coconut oil to Free Fatty Acid (FFA). The unconventional immobilized technique was used through cross-linking and covalent bond. Single factor analysis and response surface method were utilized to determine the optimum conditions of the hydrolysis reaction. After optimization, co-immobilized lipase was examined for storage stability at a temperature of 4°C and reusability performance. The optimum conditions for coconut oil hydrolysis were obtained on the co-immobilized-PUF ratio, water-oil ratio, and reaction time of 20.17 w/w, 4.45 w/w, and 20 h, respectively. Under these conditions, the acid value as lauric acid enhanced 573% to 3.21 mg KOH/g oil. Storage stability attained through remaining activity on free lipase, PUF-lipase, PUF-co-immobilized-lipase were 9.89%, 42.3%, and 91.88%, respectively. In this study, the application of PUF-co-immobilized lipase in hydrolysis reactions can be reused up to 5 times. Characteristics of the addition of co-immobilized lipase have been analyzed using Fourier Transform Infra Red (FTIR) and Scanning Electron Microscope (SEM), showing the presence of functional groups binding and the changes in the surface matrix structure. </dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:contributor xml:lang="en-US">Directorate General of Resources for Science, Technology &amp; Higher Education, Ministry of Research, Technology and Higher Education of Republic Indonesia for financial support (205/SP2H/LT/ DRPM/III/2016)</dc:contributor>
	<dc:date>2019-08-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/3848</dc:identifier>
	<dc:identifier>10.9767/bcrec.14.2.3848.391-403</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2019: BCREC Volume 14 Issue 2 Year 2019 (August 2019); 391-403</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/3848/2479</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/3848/878</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/3848/879</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/3848/880</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>