Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Understanding Pore Surface Modification of Sucrose-Modified Iron Oxide/Silica Mesoporous Composite for Degradation of Methylene Blue

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2021) · hlm. 459–471

DOI
10.9767/bcrec.16.3.10619.459-471
ISSN
1978-2993
Terbit
2021-09-30
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Santa Barbara Amorphous (SBA-15) containing iron oxide with a sucrose-modified in a heterogeneous reaction for degradation methylene blue (MB) successful synthesized used hydrothermal, ultrasonication, and wet impregnation method. SBA-15 is mesoporous silica that can easily serve as external and internal surfaces making it suitable for a wide range of applications. The structure and morphology of materials were characterized using Surface Area Analyzer (SAA), X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX), and Transmission Electron Microscopy (TEM). Iron oxide impregnated as a maghemite phase has an average size of 12 nm and well distributed on the SBA-15. After modified with sucrose the materials remaining stable, which has a two-dimensional hexagonal (p6mm) structure, high specific surface area, and large pore volume (up to 1.82 cm3.g−1). The degradation of MB was evaluated under visible light irradiation using UV-Vis spectroscopy. Catalytic activity showed efficiencies of 52.9; 70.2; and 21.1% for SBA-15, Fe2O3/SBA-15, and sucrose-modified Fe2O3/SBA-15 respectively. Sucrose-modified Fe2O3/SBA-15 has the lowest efficiency, which probably occurs due to the presence of pore-blocking and the formation of micropores on the external pore. The modification with sucrose has the advantage of producing a high surface area even though there is a catalytic center due to partial decomposition which causes a decrease in the efficiency of degradation of MB. All materials provide a high micro surface area so that they can be further adapted and can be widely applied to many potential applications as both catalyst support and an adsorbent. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 113 tautan kepenulisan bersama · 47 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Sebelas Maret University
  • Institut Teknologi Sepuluh Nopember
  • Politeknik Negeri Madura
  • University of Technology Malaysia
  • Universitas Airlangga
  • Universiti Brunei Darussalam
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Triyono TriyonoUniversitas Gadjah Mada10
Hamzah FansuriInstitut Teknologi Sepuluh Nopember5
Dyah Ayu FatmawatiUniversitas Gadjah Mada4
Suprapto SupraptoInstitut Teknologi Sepuluh Nopember4
TriyonoAfiliasi tidak diketahui4
Cindy Nur AnggreaniSebelas Maret University3
Hartati HartatiUniversitas Airlangga3
Suryo PurwonoUniversitas Gadjah Mada3
Sugeng TriwahyonoUniversity of Technology Malaysia3
Hasliza BahrujiUniversiti Brunei Darussalam3
Zainab RamliUniversity of Technology Malaysia3
Ratna EdiatiInstitut Teknologi Sepuluh Nopember3
Abdul HamidPoliteknik Negeri Madura2
Cahyarani ParamestiUniversitas Gadjah Mada2
Savitri LarasatiUniversitas Gadjah Mada2
Nugroho Raka SantosoUniversitas Gadjah Mada2
Indriyani PangestutiSebelas Maret University2
Endah SuarsihUniversitas Gadjah Mada2
Karna WijayaUniversitas Gadjah Mada2
Puspa Nindro MahayuwatiUniversitas Gadjah Mada2
Agung Nugroho Catur SaputroSebelas Maret University2
Aishah Abdul JalilUniversity of Technology Malaysia2
Novia Amalia SholehaIPB University2
Ika Uswatun HasanahSebelas Maret University2
Ida SetiariniSebelas Maret University2
Uswatul ChasanahUniversitas Gadjah Mada2
Iman SantosoUniversitas Gadjah Mada2
Witri Wahyu LestariSebelas Maret University2
Nanik Dwi NurhayatiSebelas Maret University2
Desy Tri KusumaningtyasInstitut Teknologi Sepuluh Nopember2
Mohammad AbdullahUniversiti Teknologi MARA1
Amin JakfarPoliteknik Negeri Madura1
Sirly Bifadilatur RomaniyahPoliteknik Negeri Madura1
Ike Dayi FebrianaPoliteknik Negeri Madura1
Zeni RahmawatiInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Understanding Pore Surface Modification of Sucrose-Modified Iron Oxide/Silica Mesoporous Composite for Degradation of Methylene Blue</dc:title>
	<dc:creator>Pertiwi, Yuvita Eka</dc:creator>
	<dc:creator>Ulfa, Maria</dc:creator>
	<dc:creator>Saraswati, Teguh Endah</dc:creator>
	<dc:creator>Prasetyoko, Didik</dc:creator>
	<dc:creator>Trisunaryanti, Wega</dc:creator>
	<dc:subject xml:lang="en-US">Sucrose-modified; iron oxide silica; SBA-15; composite; Fe2O3/SBA-15; methylene blue</dc:subject>
	<dc:description xml:lang="en-US">Santa Barbara Amorphous (SBA-15) containing iron oxide with a sucrose-modified in a heterogeneous reaction for degradation methylene blue (MB) successful synthesized used hydrothermal, ultrasonication, and wet impregnation method. SBA-15 is mesoporous silica that can easily serve as external and internal surfaces making it suitable for a wide range of applications. The structure and morphology of materials were characterized using Surface Area Analyzer (SAA), X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX), and Transmission Electron Microscopy (TEM). Iron oxide impregnated as a maghemite phase has an average size of 12 nm and well distributed on the SBA-15. After modified with sucrose the materials remaining stable, which has a two-dimensional hexagonal (p6mm) structure, high specific surface area, and large pore volume (up to 1.82 cm3.g−1). The degradation of MB was evaluated under visible light irradiation using UV-Vis spectroscopy. Catalytic activity showed efficiencies of 52.9; 70.2; and 21.1% for SBA-15, Fe2O3/SBA-15, and sucrose-modified Fe2O3/SBA-15 respectively. Sucrose-modified Fe2O3/SBA-15 has the lowest efficiency, which probably occurs due to the presence of pore-blocking and the formation of micropores on the external pore. The modification with sucrose has the advantage of producing a high surface area even though there is a catalytic center due to partial decomposition which causes a decrease in the efficiency of degradation of MB. All materials provide a high micro surface area so that they can be further adapted and can be widely applied to many potential applications as both catalyst support and an adsorbent. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). </dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:date>2021-09-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/10619</dc:identifier>
	<dc:identifier>10.9767/bcrec.16.3.10619.459-471</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2021: BCREC Volume 16 Issue 3 Year 2021 (September 2021); 459-471</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/10619/5480</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>