Akses terbuka
Jurnal
SINTA 1
Comparative Evaluation of Fe-MOF, Cu-MOF, and Bimetallic Fe/Cu-MOF for Enhanced CO₂ Adsorption: Synthesis, Characterization, and Performance Analysis
Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2026) · hlm. 452–466
ISSN 1978-2993
Terbit 2026-08-30
Penerbit Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa eng
Abstrak
Rising atmospheric CO₂ concentrations necessitate the development of efficient and economically viable carbon capture materials. Metal-organic frameworks (MOFs) offer strong potential due to their tunable pore structures and accessible metal sites. In this work, Fe-MOF, Cu-MOF, and bimetallic Fe/Cu-MOF were synthesized via a solvothermal route and systematically evaluated for CO₂ adsorption performance. The materials were characterized using SEM-EDX, FTIR, XRD, BET, and TGA to establish correlations between structural properties and adsorption behavior. CO₂ uptake was investigated under varying pressure (1-5 bar), adsorbent dosage (0.2-0.5 g), and temperature (40-50 °C). Among the three adsorbents, Fe/Cu-MOF exhibited the highest adsorption capacity, reaching 3.22 mg.g-¹ at 5 bar, outperforming Fe-MOF (2.54 mg.g-¹) and Cu-MOF (2.35 mg.g-¹). Adsorption increased markedly with pressure, showed non-linear dependence on dosage due to site underutilization and diffusion limitations, and decreased with increasing temperature, indicating an exothermic physisorption-dominated process. BET analysis revealed that Fe/Cu-MOF possessed the highest surface area (19.4 m².g-¹) and pore volume (0.0489 cm³.g-¹), while XRD and FTIR confirmed successful incorporation of both metal centers, generating chemically heterogeneous adsorption sites. Kinetic analysis demonstrated that CO₂ uptake follows a pseudo-first-order model, consistent with surface-controlled physisorption. The enhanced performance of Fe/Cu-MOF is attributed to synergistic effects arising from dual-metal coordination, improved pore connectivity, and increased availability of active adsorption domains. These findings highlight the potential of bimetallic Fe/Cu-MOFs as promising candidates for pressurized CO₂ capture applications and provide insight into structure-performance relationships governing gas adsorption in defect-rich MOF systems. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Jaringan kolaborasi para penulis
13 penulis ·
35 tautan kepenulisan bersama
· 14 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universiti Malaysia Pahang Al-Sultan Abdullah International Islamic University Malaysia Universiti Teknologi Brunei DRB-HICOM University of Automotive Malaysia
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Comparative Evaluation of Fe-MOF, Cu-MOF, and Bimetallic Fe/Cu-MOF for Enhanced CO₂ Adsorption: Synthesis, Characterization, and Performance Analysis</dc:title>
<dc:creator>Daud, Nor Khonisah</dc:creator>
<dc:creator>Abdullah, Hamidah</dc:creator>
<dc:creator>Ismail, Nur Aminatulmimi</dc:creator>
<dc:subject xml:lang="en-US">CO2 emission; Carbon capture; CO2 adsorption; Metal-Organic Frameworks adsorbents</dc:subject>
<dc:description xml:lang="en-US">Rising atmospheric CO₂ concentrations necessitate the development of efficient and economically viable carbon capture materials. Metal-organic frameworks (MOFs) offer strong potential due to their tunable pore structures and accessible metal sites. In this work, Fe-MOF, Cu-MOF, and bimetallic Fe/Cu-MOF were synthesized via a solvothermal route and systematically evaluated for CO₂ adsorption performance. The materials were characterized using SEM-EDX, FTIR, XRD, BET, and TGA to establish correlations between structural properties and adsorption behavior. CO₂ uptake was investigated under varying pressure (1-5 bar), adsorbent dosage (0.2-0.5 g), and temperature (40-50 °C). Among the three adsorbents, Fe/Cu-MOF exhibited the highest adsorption capacity, reaching 3.22 mg.g-¹ at 5 bar, outperforming Fe-MOF (2.54 mg.g-¹) and Cu-MOF (2.35 mg.g-¹). Adsorption increased markedly with pressure, showed non-linear dependence on dosage due to site underutilization and diffusion limitations, and decreased with increasing temperature, indicating an exothermic physisorption-dominated process. BET analysis revealed that Fe/Cu-MOF possessed the highest surface area (19.4 m².g-¹) and pore volume (0.0489 cm³.g-¹), while XRD and FTIR confirmed successful incorporation of both metal centers, generating chemically heterogeneous adsorption sites. Kinetic analysis demonstrated that CO₂ uptake follows a pseudo-first-order model, consistent with surface-controlled physisorption. The enhanced performance of Fe/Cu-MOF is attributed to synergistic effects arising from dual-metal coordination, improved pore connectivity, and increased availability of active adsorption domains. These findings highlight the potential of bimetallic Fe/Cu-MOFs as promising candidates for pressurized CO₂ capture applications and provide insight into structure-performance relationships governing gas adsorption in defect-rich MOF systems. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).</dc:description>
<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
<dc:date>2026-08-30</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/20658</dc:identifier>
<dc:identifier>10.9767/bcrec.20658</dc:identifier>
<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering & Catalysis; 2026: BCREC Volume 21 Issue 2 Year 2026 (August 2026); 452-466</dc:source>
<dc:source>1978-2993</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/20658/9939</dc:relation>
<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20658/6231</dc:relation>
<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20658/6232</dc:relation>
<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/20658/6266</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2026 by Authors, Published by BCREC Publishing Group</dc:rights>
<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Daud, N. K., Abdullah, H., & Ismail, N. A. (2026). Comparative Evaluation of Fe-MOF, Cu-MOF, and Bimetallic Fe/Cu-MOF for Enhanced CO₂ Adsorption: Synthesis, Characterization, and Performance Analysis. Bulletin of Chemical Reaction Engineering & Catalysis, ume, 452–466. https://doi.org/10.9767/bcrec.20658
Salin
IEEE
N. K. Daud, H. Abdullah, and N. A. Ismail, “Comparative Evaluation of Fe-MOF, Cu-MOF, and Bimetallic Fe/Cu-MOF for Enhanced CO₂ Adsorption: Synthesis, Characterization, and Performance Analysis,” Bulletin of Chemical Reaction Engineering & Catalysis, vol. ume, pp. 452–466, 2026, doi: 10.9767/bcrec.20658.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.