Akses terbuka
Jurnal
SINTA 1
Selective Reduction of Southeast Sulawesi Nickel Laterite using Palm Kernel Shell Charcoal: Kinetic Studies with Addition of Na2SO4 and NaCl as Additives
Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2020) · hlm. 501–513
ISSN 1978-2993
Terbit 2020-08-01
Penerbit Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa eng
Abstrak
The aim of the reduction process is to concentrate nickel at high temperatures with a certain carbonaceous material as a reducing agent. The use of chemicals like Na2SO4 and NaCl in the reduction process can increase the content and recovery of nickel in ferronickel concentrates. A selective reduction of laterite nickel was carried out in a non-isothermal and an isothermal using palm kernel shell charcoal as a reductant and with Na2SO4 and NaCl as additives. Firstly, the raw material is made into a pellet and dried in an oven at 100 °C for two hours. The pellets are weighed before and after the reduction process. The non-isothermal reduction process used the Thermal Gravimetric Analysis (TGA) method from a temperature of 100 to 1300 °C, with a heat rate of 10 °C per minute. The isothermal reduction at temperatures 500, 600, 700, 950, 1050, and 1150 °C occurred with a reduction time of 30, 60, and 90 minutes. The analysis is Inductively Coupled Plasma (ICP) to determine the content of nickel and iron from the reduction process, X-ray Diffraction (XRD) to see changes in the phases formed after the selective reduction process, and Scanning Electron Microscopy (SEM-EDX) for viewing the microstructure of the phase. The Differential Thermal Analyzer-Temperature Gravimetric Analysis (DTA-TGA) results show the endothermic at 256 °C, and the exothermic peak at 935 °C with a total mass loss of 42.15% at 1238 °C. The shrinking core model was used for the kinetic studies of the reduction process. The closest kinetic model to the experimental results is the Ginstling-Brounshtein model, with an activation energy value of 8.73 kcal/mol. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Jaringan kolaborasi para penulis
22 penulis ·
193 tautan kepenulisan bersama
· 19 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Sumatera Institute of Technology Indonesian Institute of Sciences Lampung University Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulis Organisasi Artikel bersama
Faculty of science, Sumatera Institute of Technology, 35365, Indonesia Department of Physics Afiliasi tidak diketahui 1
Faculty of science, Sumatera Institute of Technology, 35365, Indonesia Department of Master Physics Afiliasi tidak diketahui 1
University of Indonesia, 16424, Indonesia Mathematic and Science Faculty Afiliasi tidak diketahui 1
Sumatera Institute of Technology, 35365, Indonesia Department of Chemistry Afiliasi tidak diketahui 1
University of Lampung, 3514, Indonesia Department of Physics Afiliasi tidak diketahui 1
FMIPA, ITB, Bandung, Indonesia Physics of Magnetic and Photonic Research Group division Afiliasi tidak diketahui 1
Indonesia National Research and Innovation Agency (BRIN) Iskandar Zulkarnain Tanjung Bintang Tanjung Bintang Afiliasi tidak diketahui 1
Priyan Prayogo Sumatera Institute of Technology 1
Posman Manurung Lampung University 1
Herman Herman Afiliasi tidak diketahui 1
Ilma Maulidina Sumatera Institute of Technology 1
Dwi Febrianti Sumatera Institute of Technology 1
Rifqi Almusawi Rafsanjani Afiliasi tidak diketahui 1
Iin Riananda Sumatera Institute of Technology 1
Ridho Hidayat Sumatera Institute of Technology 1
Laila Khafidatul Rosidah Sumatera Institute of Technology 1
Jesica Violina Sumatera Institute of Technology 1
Okta Ferli Suryadi Sumatera Institute of Technology 1
Indra Pardede Sumatera Institute of Technology 1
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Selective Reduction of Southeast Sulawesi Nickel Laterite using Palm Kernel Shell Charcoal: Kinetic Studies with Addition of Na2SO4 and NaCl as Additives</dc:title>
<dc:creator>Shofi, Achmad</dc:creator>
<dc:creator>Supriyatna, Yayat Iman</dc:creator>
<dc:creator>Prasetyo, Agus Budi</dc:creator>
<dc:subject xml:lang="en-US">additives; characterization; kinetic; nickel laterite; reductor; selective reduction</dc:subject>
<dc:description xml:lang="en-US">The aim of the reduction process is to concentrate nickel at high temperatures with a certain carbonaceous material as a reducing agent. The use of chemicals like Na2SO4 and NaCl in the reduction process can increase the content and recovery of nickel in ferronickel concentrates. A selective reduction of laterite nickel was carried out in a non-isothermal and an isothermal using palm kernel shell charcoal as a reductant and with Na2SO4 and NaCl as additives. Firstly, the raw material is made into a pellet and dried in an oven at 100 °C for two hours. The pellets are weighed before and after the reduction process. The non-isothermal reduction process used the Thermal Gravimetric Analysis (TGA) method from a temperature of 100 to 1300 °C, with a heat rate of 10 °C per minute. The isothermal reduction at temperatures 500, 600, 700, 950, 1050, and 1150 °C occurred with a reduction time of 30, 60, and 90 minutes. The analysis is Inductively Coupled Plasma (ICP) to determine the content of nickel and iron from the reduction process, X-ray Diffraction (XRD) to see changes in the phases formed after the selective reduction process, and Scanning Electron Microscopy (SEM-EDX) for viewing the microstructure of the phase. The Differential Thermal Analyzer-Temperature Gravimetric Analysis (DTA-TGA) results show the endothermic at 256 °C, and the exothermic peak at 935 °C with a total mass loss of 42.15% at 1238 °C. The shrinking core model was used for the kinetic studies of the reduction process. The closest kinetic model to the experimental results is the Ginstling-Brounshtein model, with an activation energy value of 8.73 kcal/mol. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). </dc:description>
<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
<dc:date>2020-08-01</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/7733</dc:identifier>
<dc:identifier>10.9767/bcrec.15.2.7733.501-513</dc:identifier>
<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering & Catalysis; 2020: BCREC Volume 15 Issue 2 Year 2020 (August 2020); 501-513</dc:source>
<dc:source>1978-2993</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/7733/4282</dc:relation>
<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/7733/1792</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2020 by Authors, Published by BCREC Group</dc:rights>
<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Shofi, A., Supriyatna, Y. I., & Prasetyo, A. B. (2020). Selective Reduction of Southeast Sulawesi Nickel Laterite using Palm Kernel Shell Charcoal: Kinetic Studies with Addition of Na2SO4 and NaCl as Additives. Bulletin of Chemical Reaction Engineering & Catalysis, ume, 501–513. https://doi.org/10.9767/bcrec.15.2.7733.501-513
Salin
IEEE
A. Shofi, Y. I. Supriyatna, and A. B. Prasetyo, “Selective Reduction of Southeast Sulawesi Nickel Laterite using Palm Kernel Shell Charcoal: Kinetic Studies with Addition of Na2SO4 and NaCl as Additives,” Bulletin of Chemical Reaction Engineering & Catalysis, vol. ume, pp. 501–513, 2020, doi: 10.9767/bcrec.15.2.7733.501-513.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.