Article present the work and fuction of a tool which is able to scan an object reconstructed into a three-dimensionalobject. The object could be modified by computer software. Methodology were library and laboratory research methods. Fromthe experiment results, the scanning and reconstruction process of three-dimensional object could work well. The conclusionobtained is the optimum angle to scan the object is at an angle of 25o to 35o. While the average time needed to play the discis 50 seconds.Keywords: scanner, object, three-dimensional scanning, reconstruction
Jaringan kolaborasi para penulis
7 penulis ·
16 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Binus University
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.