Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Formation of fine particles using supercritical fluid (SCF) process: Short review

Communications in Science and Technology · Vol. 3 No. 2 (2018) · hlm. 57–63

DOI
10.21924/cst.3.2.2018.101
ISSN
2502-9266, 2502-9258
Terbit
2018-12-25
Penerbit
Komunitas Ilmuwan dan Profesional Muslim Indonesia
Bahasa
eng

Abstrak

This paper will discuss about the utilization of supercritical fluid (SCF) process to produce fine particles. Supercritical fluids (SCFs) process can be considered as an emerging “clean” technology for the production of small-size or fine particles (e.g. micron-size). Microsphere is a material in micron scale which has been widely used as adsorbent, catalyst support, and drug delivery system. For advanced application, those materials are formulated in the form of porous microspheres. There are several methods that can be used using SCFs. Those method are, Rapid Expansion of Supercritical Solution (RESS), Gas Anti-Solvent/Supercritical Anti-Solvent (GAS/ SAS), Aerosol Solvent Extraction System (ASES), dan Solution Enhanced Dispersion by Supercritical Fluids (SEDS) and Particle from Gas-Saturated Solutions/Suspensions (PGSS). Considering the morphology of material which will be used to prepare microsphere, each of methods above has specific advantages and disadvantages toward the material. Based on the literatures, the ASES method is more likely to produce porous microparticles (microspheres). In the ASES method, porous microsphere formation is the result of interactions between: degrees of supersaturation, nucleation velocity and crystal growth.

Kata kunci

Jaringan kolaborasi para penulis

33 penulis · 93 tautan kepenulisan bersama · 45 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Islamic University of Indonesia
  • Institut Teknologi Sepuluh Nopember
  • Institut Teknologi Indonesia
  • Sebelas Maret University
  • Universitas Gadjah Mada
  • Imam Mohammad ibn Saud Islamic University
  • Universitas Dr. Soetomo
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mahfud MahfudInstitut Teknologi Sepuluh Nopember2
Agam Duma Kalista WibowoInstitut Teknologi Indonesia2
Yuyun YuniatiUniversitas Dr. Soetomo1
Selfina GalaUniversitas Fajar1
Jaka WidadaUniversitas Gadjah Mada1
Sudadi SudadiSebelas Maret University1
Lilis KistriyaniIslamic University of Indonesia1
Zainus SaliminIslamic University of Indonesia1
Jono SuhartonoAfiliasi tidak diketahui1
Amira Rahmani AfandiIslamic University of Indonesia1
Bunga Mela RosaIslamic University of Indonesia1
Pratikno HidayatInstitut Teknologi Nasional Bandung1
Harri JunaediIslamic University of Indonesia1
Rizki MegawatiInstitut Teknologi Indonesia1
Vilia Kartika SetyaningrumInstitut Teknologi Indonesia1
Erika Wahyu PutriInstitut Teknologi Indonesia1
JoelianingsihInstitut Teknologi Indonesia1
Aniek Sri HandayaniInstitut Teknologi Indonesia1
Maharani Dewi SolikhahNational Research and Innovation Agency1
Haryanto .Afiliasi tidak diketahui1
Suharno RusdiIslamic University of Indonesia1
Imam NurrahmanIslamic University of Indonesia1
Adi KusmayadiNational Yunlin University of Science and Technology1
Danang Tri HartantoUniversitas Gadjah Mada1
Ruslan KallaInstitut Teknologi Sepuluh Nopember1
Setiyo GunawanInstitut Teknologi Sepuluh Nopember1
Gede WibawaInstitut Teknologi Sepuluh Nopember1
Asalil MustainInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://cst.kipmi.or.id/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Formation of fine particles using supercritical fluid (SCF) process: Short review</dc:title>
	<dc:creator>Chafidz, Achmad</dc:creator>
	<dc:creator>Jauhary, Thonthowy</dc:creator>
	<dc:creator>Kaavessina, Mujtahid</dc:creator>
	<dc:creator>Sumarno, Sumarno</dc:creator>
	<dc:creator>Latief, Fahamsyah H.</dc:creator>
	<dc:subject xml:lang="en-US">Supercritical fluids; carbon dioxide; fine particles; RESS; PGSS; SAS; GAS; ASES; SEDS</dc:subject>
	<dc:description xml:lang="en-US">This paper will discuss about the utilization of supercritical fluid (SCF) process to produce fine particles. Supercritical fluids (SCFs) process can be considered as an emerging “clean” technology for the production of small-size or fine particles (e.g. micron-size). Microsphere is a material in micron scale which has been widely used as adsorbent, catalyst support, and drug delivery system. For advanced application, those materials are formulated in the form of porous microspheres. There are several methods that can be used using SCFs. Those method are, Rapid Expansion of Supercritical Solution (RESS), Gas Anti-Solvent/Supercritical Anti-Solvent (GAS/ SAS), Aerosol Solvent Extraction System (ASES), dan Solution Enhanced Dispersion by Supercritical Fluids (SEDS) and Particle from Gas-Saturated Solutions/Suspensions (PGSS). Considering the morphology of material which will be used to prepare microsphere, each of methods above has specific advantages and disadvantages toward the material. Based on the literatures, the ASES method is more likely to produce porous microparticles (microspheres). In the ASES method, porous microsphere formation is the result of interactions between: degrees of supersaturation, nucleation velocity and crystal growth.</dc:description>
	<dc:publisher xml:lang="en-US">Komunitas Ilmuwan dan Profesional Muslim Indonesia</dc:publisher>
	<dc:date>2018-12-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://cst.kipmi.or.id/journal/article/view/101</dc:identifier>
	<dc:identifier>10.21924/cst.3.2.2018.101</dc:identifier>
	<dc:source xml:lang="en-US">Communications in Science and Technology; Vol. 3 No. 2 (2018); 57-63</dc:source>
	<dc:source xml:lang="id-ID">Communications in Science and Technology; Vol 3 No 2 (2018); 57-63</dc:source>
	<dc:source>2502-9266</dc:source>
	<dc:source>2502-9258</dc:source>
	<dc:source>10.21924/cst.3.2.2018</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://cst.kipmi.or.id/journal/article/view/101/48</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Communications in Science and Technology</dc:rights>
</oai_dc:dc>