Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Techno-economic analysis for the production of LaNi5 particles

Communications in Science and Technology · Vol. 5 No. 2 (2020) · hlm. 70–84

DOI
10.21924/cst.5.2.2020.195
ISSN
2502-9266, 2502-9258
Terbit
2020-12-26
Penerbit
Komunitas Ilmuwan dan Profesional Muslim Indonesia
Bahasa
eng

Abstrak

LaNi5 is widely used in various applications. Many methods to produce LaNi5 particles have been reported but information for the large-scale production, so far, is less available. This study aimed to evaluate the project for the production of LaNi5 particles using combustion-reduction (CR) and co-precipitation-reduction (CPR) methods based on engineering and economic perspective. Engineering evaluation was conducted by evaluating the CR and CPR processes from stoichiometry. For the economic evaluation, several economic parameters were calculated in the ideal condition including gross profit margin (GPM), payback period (PBP), break-even point (BEP), cumulative net present value (CNPV), profitability index (PI), internal rate return (IRR), and return on investment (ROI). For the worst cases in the project, it was done by calculating both the internal problems (i.e., raw materials, sales, utility, labor, employee, fixed cost, variable cost, and production capacity) and the external issues (i.e., taxes and subsidiaries). The engineering analysis provided the information that CR and CPR projects are prospective for being able to be done using commercial apparatuses. The economic analysis from GPM, PBP, BEP, CNPV, and PI showed the positive results, while IRR and ROI showed the negative ones, indicating that the projects are acceptable for large-scale production, but it seems to be less attractive for industrial investors. The analysis also confirmed that the CR process was more prospective than the CPR process. This work has demonstrated the important of the projects for further developments.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 130 tautan kepenulisan bersama · 68 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesia University of Education
  • Universitas Djuanda
  • University of Technology Malaysia
  • Taylor's University
  • Universitas Muhammadiyah Magelang
  • Universiti Brunei Darussalam
  • Sampoerna University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Risti RagadhitaIndonesia University of Education7
Dwi Fitria Al HusaeniIndonesia University of Education6
Abdulkareem Sh. Mahdi Al‐ObaidiTaylor's University5
Dwi Novia Al HusaeniIndonesia University of Education5
Meli FiandiniIndonesia University of Education3
Muji SetiyoUniversitas Muhammadiyah Magelang3
Muhammad Roil BiladUniversiti Brunei Darussalam3
Siti Pupu FauziahUniversitas Djuanda2
Martin RoestamyUniversitas Djuanda2
Irman SuhermanUniversitas Djuanda2
Farid TriawanSampoerna University2
Siti Nur HofifahIndonesia University of Education2
Gabriela Chelvina Santiuly GirsangIndonesia University of Education2
Tedi KurniawanCommunity College of Qatar2
Belkheir HammoutiEuro-Mediterranean University of Fes2
Obie FarobieIPB University2
Novi NurjanahIndonesia University of Education1
Qurratu Aini Alya AdzkiaIndonesia University of Education1
Riki RustanaIndonesia University of Education1
Selvi Citra CarollineIndonesia University of Education1
Shabrina Maulida AgustineIndonesia University of Education1
Muhammad Rendi RamdhaniUniversitas Djuanda1
Abdul KholikUniversitas Djuanda1
Irianto IriantoUniversitas Jambi1
Tatang HermanIndonesia University of Education1
Didi SuryadiIndonesia University of Education1
I Made SuarsanaUniversitas Pendidikan Ganesha1
Al JupriIndonesia University of Education1
Elah NurlaelahIndonesia University of Education1
Zulkaidah Nur AhzanUniversity of Timor1
Alifia Vidiashtari NabillaIndonesia University of Education1
Alifa Listina DewiIndonesia University of Education1
Bentang Arief BudimanBandung Institute of Technology1
Silmi Ridwan PutriIndonesia University of Education1
Anton IrawanSultan Ageng Tirtayasa University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://cst.kipmi.or.id/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Techno-economic analysis for the production of LaNi5 particles </dc:title>
	<dc:creator>Nandiyanto, Asep Bayu Dani</dc:creator>
	<dc:creator>Maulana, Muhammad Irfansyah</dc:creator>
	<dc:creator>Raharjo, Jarot</dc:creator>
	<dc:creator>Sunarya, Yayan</dc:creator>
	<dc:creator>Minghat, Asnul Dahar</dc:creator>
	<dc:subject xml:lang="en-US">Techno-economic analysis</dc:subject>
	<dc:subject xml:lang="en-US">feasibility study</dc:subject>
	<dc:subject xml:lang="en-US">large-scale production</dc:subject>
	<dc:subject xml:lang="en-US">LaNi5</dc:subject>
	<dc:description xml:lang="en-US">LaNi5 is widely used in various applications. Many methods to produce LaNi5 particles have been reported but information for the large-scale production, so far, is less available. This study aimed to evaluate the project for the production of LaNi5 particles using combustion-reduction (CR) and co-precipitation-reduction (CPR) methods based on engineering and economic perspective. Engineering evaluation was conducted by evaluating the CR and CPR processes from stoichiometry. For the economic evaluation, several economic parameters were calculated in the ideal condition including gross profit margin (GPM), payback period (PBP), break-even point (BEP), cumulative net present value (CNPV), profitability index (PI), internal rate return (IRR), and return on investment (ROI). For the worst cases in the project, it was done by calculating both the internal problems (i.e., raw materials, sales, utility, labor, employee, fixed cost, variable cost, and production capacity) and the external issues (i.e., taxes and subsidiaries). The engineering analysis provided the information that CR and CPR projects are prospective for being able to be done using commercial apparatuses. The economic analysis from GPM, PBP, BEP, CNPV, and PI showed the positive results, while IRR and ROI showed the negative ones, indicating that the projects are acceptable for large-scale production, but it seems to be less attractive for industrial investors. The analysis also confirmed that the CR process was more prospective than the CPR process. This work has demonstrated the important of the projects for further developments.</dc:description>
	<dc:publisher xml:lang="en-US">Komunitas Ilmuwan dan Profesional Muslim Indonesia</dc:publisher>
	<dc:date>2020-12-26</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://cst.kipmi.or.id/journal/article/view/195</dc:identifier>
	<dc:identifier>10.21924/cst.5.2.2020.195</dc:identifier>
	<dc:source xml:lang="en-US">Communications in Science and Technology; Vol. 5 No. 2 (2020); 70-84</dc:source>
	<dc:source xml:lang="id-ID">Communications in Science and Technology; Vol 5 No 2 (2020); 70-84</dc:source>
	<dc:source>2502-9266</dc:source>
	<dc:source>2502-9258</dc:source>
	<dc:source>10.21924/cst.5.2.2020</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://cst.kipmi.or.id/journal/article/view/195/74</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Communications in Science and Technology</dc:rights>
</oai_dc:dc>