Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effect of multi-walled CNTs polyurethane mats lamination with basalt fabrics reinforced-epoxy composites reviewed on tension and bending properties

Communications in Science and Technology · Vol. 8 No. 1 (2023) · hlm. 100–107

DOI
10.21924/cst.8.1.2023.1195
ISSN
2502-9266, 2502-9258
Terbit
2023-07-11
Penerbit
Komunitas Ilmuwan dan Profesional Muslim Indonesia
Bahasa
eng

Abstrak

Material technology continues to develop with various innovations and engineering to improve weaknesses in both mechanical and physical properties. In this study, electrospun fibres containing a multi-wall blend of CNT and Polyurethane (PU) with or without surfactant that laminated into a basalt fibre-reinforced composite were uniquely demonstrated. Multi-wall CNT 3wt% was added to the PU/MEK/DMF solution and produced using an electrospinning process. PU fibre mat containing 3wt% CNT was made without and with surfactants. Also, Basalt fibre reinforced epoxy composite as a control sample was produced. In addition, vacuum-assisted resin transfer printing has been used in the manufacture of composite panels containing both fibres. The aim of combining basalt fibre and PU CNT spun mats was to investigate their effect on the tensile and flexural mechanical properties. Tensile and flexural tests were carried out on a universal testing machine (UTM) in accordance to ASTM D 638 and ASTM D790 standards. FESEM and TEM on composite morphology test were done after testing. The results indicated that the basal matting fibre-reinforced epoxy composites stacked by PU mats with or without surfactants were affected by CNT inclusions. Nanofiber spun mats laminated in a basalt fibre composite lead to a considerable increase in both loads (i.e. tensile and flexural properties). The highest tensile and flexural load values occurred in the BF+PU-mat-2 sample with triton-x 100 surfactants compared to BFRP. The increase in tensile and flexural modulus values was at 13% and 17.3%, respectively. On the other hand, there was a decrease in shear failure due to tensile and bending loads due to the brittleness of the composite reinforcement. In conclusion, this CNF-mat lamination is highly suitable to be used to improve the strength properties of BFRP composites. It is highly recommended for automotive parts, marine compartments and storage insulation.

Kata kunci

Jaringan kolaborasi para penulis

12 penulis · 22 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Udayana University
  • Politeknik Negeri Bali
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
A.R FaridAfiliasi tidak diketahui1
I.P. Artha WirawanUdayana University1
I.K AdiatmikaUdayana University1
I.A.N PramadyantiUdayana University1
I.K.A. AtmikaUdayana University1
I Made ArsawanPoliteknik Negeri Bali1
I KG WirawanAfiliasi tidak diketahui1
Dnk Putra NegaraUdayana University1
NW SugiartiUdayana University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://cst.kipmi.or.id/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect of multi-walled CNTs polyurethane mats lamination with basalt fabrics reinforced-epoxy composites reviewed on tension and bending properties</dc:title>
	<dc:creator>Sugiarti, N. W.</dc:creator>
	<dc:creator>Adi Atmika, K.</dc:creator>
	<dc:creator>Ary Subagia, I. D. G.</dc:creator>
	<dc:subject xml:lang="en-US">Electrospinning</dc:subject>
	<dc:subject xml:lang="en-US">Polyurethane</dc:subject>
	<dc:subject xml:lang="en-US">Basalt fabric</dc:subject>
	<dc:subject xml:lang="en-US">Stacking</dc:subject>
	<dc:description xml:lang="en-US">Material technology continues to develop with various innovations and engineering to improve weaknesses in both mechanical and physical properties. In this study, electrospun fibres containing a multi-wall blend of CNT and Polyurethane (PU) with or without surfactant that laminated into a basalt fibre-reinforced composite were uniquely demonstrated. Multi-wall CNT 3wt% was added to the PU/MEK/DMF solution and produced using an electrospinning process. PU fibre mat containing 3wt% CNT was made without and with surfactants. Also, Basalt fibre reinforced epoxy composite as a control sample was produced. In addition, vacuum-assisted resin transfer printing has been used in the manufacture of composite panels containing both fibres. The aim of combining basalt fibre and PU CNT spun mats was to investigate their effect on the tensile and flexural mechanical properties. Tensile and flexural tests were carried out on a universal testing machine (UTM) in accordance to ASTM D 638 and ASTM D790 standards. FESEM and TEM on composite morphology test were done after testing. The results indicated that the basal matting fibre-reinforced epoxy composites stacked by PU mats with or without surfactants were affected by CNT inclusions. Nanofiber spun mats laminated in a basalt fibre composite lead to a considerable increase in both loads (i.e. tensile and flexural properties). The highest tensile and flexural load values occurred in the BF+PU-mat-2 sample with triton-x 100 surfactants compared to BFRP. The increase in tensile and flexural modulus values was at 13% and 17.3%, respectively. On the other hand, there was a decrease in shear failure due to tensile and bending loads due to the brittleness of the composite reinforcement. In conclusion, this CNF-mat lamination is highly suitable to be used to improve the strength properties of BFRP composites. It is highly recommended for automotive parts, marine compartments and storage insulation.</dc:description>
	<dc:publisher xml:lang="en-US">Komunitas Ilmuwan dan Profesional Muslim Indonesia</dc:publisher>
	<dc:date>2023-07-11</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://cst.kipmi.or.id/journal/article/view/1195</dc:identifier>
	<dc:identifier>10.21924/cst.8.1.2023.1195</dc:identifier>
	<dc:source xml:lang="en-US">Communications in Science and Technology; Vol. 8 No. 1 (2023); 100-107</dc:source>
	<dc:source xml:lang="id-ID">Communications in Science and Technology; Vol 8 No 1 (2023); 100-107</dc:source>
	<dc:source>2502-9266</dc:source>
	<dc:source>2502-9258</dc:source>
	<dc:source>10.21924/cst.8.1.2023</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://cst.kipmi.or.id/journal/article/view/1195/137</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Communications in Science and Technology</dc:rights>
</oai_dc:dc>