Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Modification of Chitosan/PEG4000 dispersed with Lithium Triflate (LiCF\(_3\)SO\(_3\)) as a solid polymer electrolyte for the secondary battery

Communications in Science and Technology · Vol. 9 No. 2 (2024) · hlm. 243–251

DOI
10.21924/cst.9.2.2024.1496
ISSN
2502-9266, 2502-9258
Terbit
2024-12-31
Penerbit
Komunitas Ilmuwan dan Profesional Muslim Indonesia
Bahasa
eng

Abstrak

Secondary battery solid electrolytes attract researchers' attention for being one of the components of the anode and cathode separation in batteries. Currently, battery electrolytes on the market are liquid-based, which have weaknesses in their safety and are not environmentally friendly. Solid-based electrolytes can be a good choice since they excel in the safety and stability of mechanical and electrical properties; however, they still have the disadvantage of low conductivity values (~10-4 - 10-6 S/cm), thus requiring modification. The solid electrolytes modification using chitosan can be done by adding other polymers and salts as fillers and Li+ ion-making agents. This scientific paper offers an overview of the development of chitosan-based secondary battery solid electrolytes with the addition of PEG4000 polymer and LiCF3SO3. The study was conducted using the solution casting method producing solid electrolytes in the form of membranes. The addition of PEG4000 and LiCF3SO3 affected the microstructure and electrical permittivity of the polymer solid electrolyte membrane. PEG4000 as a plasticizer had no significant effect on inter- and intra-molecular bonds due to poor membrane homogeneity; meanwhile, LiCF3SO3 could increase the permittivity and ionic conductivity of the chitosan polymer solid electrolyte membrane to 3.199 x 10-7 S/cm. The chitosan polymer solid electrolyte membrane with the addition of PEG4000 and 30% LiCF3SO3 salt has an optimal value compared to other salt concentration variations. The results of this research concluded that LiCF3SO3 is evenly dispersed in the chitosan/PEG4000 solid polymer electrolyte membrane enabling it to be used as a secondary battery solid electrolyte.

Kata kunci

Jaringan kolaborasi para penulis

35 penulis · 143 tautan kepenulisan bersama · 88 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Jenderal Soedirman University
  • Padjadjaran University
  • Universitas Pertamina
  • Universitas Muhammadiyah Metro
  • Universitas Gadjah Mada
  • Andalas University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sunardi SunardiJenderal Soedirman University2
Yazid Zainur IsnenJenderal Soedirman University2
Yaya RukayadiUniversiti Putra Malaysia1
Agus SutantoAndalas University1
Handoko SantosoUniversitas Muhammadiyah Metro1
Hening WidowatiUniversitas Muhammadiyah Metro1
Hasminar Rachman FidiastutiUniversitas Tribhuwana Tunggadewi1
Aco TangAfiliasi tidak diketahui1
Rahmat NugrahaAfiliasi tidak diketahui1
HasbiahAfiliasi tidak diketahui1
Indah Try WahyudiAfiliasi tidak diketahui1
Tiar ErawanAfiliasi tidak diketahui1
Nia RossianaPadjadjaran University1
Asri Peni WulandariPadjadjaran University1
Fitri WidiantiniPadjadjaran University1
Tati HerlinaPadjadjaran University1
Vira Kusuma DewiPadjadjaran University1
Nila Tanyela BerghuisUniversitas Pertamina1
Sun Theo Constan Lotebulo NdruruNational Research and Innovation Agency1
Muhammad Ihsan SofyanNational Research and Innovation Agency1
Elvira Nur RachmadhantiUniversitas Pertamina1
Shanny FridarimaUniversitas Pertamina1
Ridho PrasetyoDiponegoro University1
Atika Trisna HayatiNational Research and Innovation Agency1
Risda AdrianaHasanuddin University1
Rabiyatul Adawiyah SiregarLampung University1
Yulianti SamporaNational Research and Innovation Agency1
Dicky AnnasNational Research and Innovation Agency1
Muhammad Jihad MadiabuPoliteknik AKA Bogor1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://cst.kipmi.or.id/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Modification of Chitosan/PEG4000 dispersed with Lithium Triflate (LiCF\(_3\)SO\(_3\)) as a solid polymer electrolyte for the secondary battery</dc:title>
	<dc:creator>Sari, Kartika</dc:creator>
	<dc:creator>Haryadi, Arifin Nur Muhammad</dc:creator>
	<dc:creator>Khusaenah, Nur</dc:creator>
	<dc:creator>Sudaryanto</dc:creator>
	<dc:creator>Yulianti, Evi</dc:creator>
	<dc:creator>Utomo, Agung Bambang Setio</dc:creator>
	<dc:subject xml:lang="en-US">Solid electrolyte</dc:subject>
	<dc:subject xml:lang="en-US">secondary battery</dc:subject>
	<dc:subject xml:lang="en-US">crystal structure</dc:subject>
	<dc:subject xml:lang="en-US">permittivity</dc:subject>
	<dc:subject xml:lang="en-US">dielectric</dc:subject>
	<dc:description xml:lang="en-US">Secondary battery solid electrolytes attract researchers' attention for being one of the components of the anode and cathode separation in batteries. Currently, battery electrolytes on the market are liquid-based, which have weaknesses in their safety and are not environmentally friendly. Solid-based electrolytes can be a good choice since they excel in the safety and stability of mechanical and electrical properties; however, they still have the disadvantage of low conductivity values (~10-4 - 10-6 S/cm), thus requiring modification. The solid electrolytes modification using chitosan can be done by adding other polymers and salts as fillers and Li+ ion-making agents. This scientific paper offers an overview of the development of chitosan-based secondary battery solid electrolytes with the addition of PEG4000 polymer and LiCF3SO3. The study was conducted using the solution casting method producing solid electrolytes in the form of membranes. The addition of PEG4000 and LiCF3SO3 affected the microstructure and electrical permittivity of the polymer solid electrolyte membrane. PEG4000 as a plasticizer had no significant effect on inter- and intra-molecular bonds due to poor membrane homogeneity; meanwhile, LiCF3SO3 could increase the permittivity and ionic conductivity of the chitosan polymer solid electrolyte membrane to 3.199 x 10-7 S/cm. The chitosan polymer solid electrolyte membrane with the addition of PEG4000 and 30% LiCF3SO3 salt has an optimal value compared to other salt concentration variations.&amp;nbsp; The results of this research concluded that LiCF3SO3 is evenly dispersed in the chitosan/PEG4000 solid polymer electrolyte membrane enabling it to be used as a secondary battery solid electrolyte.</dc:description>
	<dc:publisher xml:lang="en-US">Komunitas Ilmuwan dan Profesional Muslim Indonesia</dc:publisher>
	<dc:date>2024-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://cst.kipmi.or.id/journal/article/view/1496</dc:identifier>
	<dc:identifier>10.21924/cst.9.2.2024.1496</dc:identifier>
	<dc:source xml:lang="en-US">Communications in Science and Technology; Vol. 9 No. 2 (2024); 243-251</dc:source>
	<dc:source xml:lang="id-ID">Communications in Science and Technology; Vol 9 No 2 (2024); 243-251</dc:source>
	<dc:source>2502-9266</dc:source>
	<dc:source>2502-9258</dc:source>
	<dc:source>10.21924/cst.9.2.2024</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://cst.kipmi.or.id/journal/article/view/1496/187</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Communications in Science and Technology</dc:rights>
</oai_dc:dc>